1 / 5
IKEA SKÅDIS / SKADIS Phone & Tablet Shelf — zdjęcie 1
1 / 5

IKEA SKÅDIS / SKADIS Phone & Tablet Shelf

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shelf for a phone or tablet with a cable slot for the IKEA SKÅDIS pegboard.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Your phone or tablet on the wall, charging and always in view. A 150 mm wide shelf for IKEA SKADIS pegboards.

Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.

Features

  • Fits devices up to 14 mm thick, including the case

  • The device leans against the board

  • Slot in the middle for the charging cable

Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.

More for your SKADIS board

See all of them in my collection: Skadis hardware

If you print it, I'd love to see a photo in the comments or as a Make!

Tagi