1 / 3

4U Server Case 120mm Fan Hole Cable Guard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fletcher

@Fletcher_263017

Power supply cable guard for a 120mm fan cut-out in sheet metal, to protect cable and fingers from getting cut.

Ocena: 0 / 5
Polubienia: 18
Pobrania: 32
Wydruki: 0
Wyświetlenia: 1409
Oceny: 0

Aktualizacja u źródła: 2 maj 2022

Informacje o modelu

Źródło: Printables
Kategoria: Computers
Licencja: Creative Commons — Attribution

Szczegóły Pliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)

Overview

This collection is my attempt at creating a crypto currency mining server, using a generic 4U Server Case converted to contain Graphics Cards (GPU). You could also use this as a neural network farm, render farm, Folding@Home server, etc. During this journey, I needed to design several brackets and adapters to make parts and cables fit smoothly, and wanted to share these with the community. This collection also references several other printed parts that were extremely useful, but not my design. Recommend at least using PETG material due to heat inside the server case. Happy printing :)

This Model - 4U Server Case Fan Hole Cable Guard

The GYAM server case had a middle rail to mount additional 120mm fans. However, I needed to use one of these fan holes for my power supply cables and was concerned about the cut sheet metal damaging the cables and my fingers. This guard allows the cables to rest on plastic instead of metal, and is mounted using the same fan mounting holes and self-tapping fan mount screws into the plastic.

My Other Models in this Collection

4U Server Case GPU PCIe Riser Mount Conversion V006 to V009S - https://www.printables.com/model/189407-4u-server-case-gpu-pcie-riser-mount-conversion-v00

4U Server Case Floor Stand Feet (Vertical/ Horizontal) - https://www.printables.com/model/189445-4u-server-case-floor-stand-feet-vertical-horizonta

4U Server Case Motherboard Cable Support Bracket - https://www.printables.com/model/189456-4u-server-case-motherboard-cable-support-bracket

External 3D Model References Used in the Server Build

PCIe / PCI-e Riser Adapter Lock Clip (leeph) - https://www.thingiverse.com/thing:2833817

My Customized Fan grill 120 (jenaplissken) - https://www.thingiverse.com/thing:3103228

PCI SSD Bracket (BearTechandTools) - https://www.thingiverse.com/thing:946543

PCI Slot Cover (Printercat64) - https://www.printables.com/model/160015-pci-slot-cover

Zip Tie Anchor (LoboCNC) - https://www.printables.com/model/132296-zip-tie-anchor

Non-Printed Main Components List

Case: GYAM 4U Height Rackmount Server Chassis 6/8 Cards ATX Motherboard