Rosewill RSV Hotswap Disk Sled (5mm Latch Spring Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zack Freedman's Rosewill RSV disk sled, modified so the latch uses a 5mm OD spring instead of a 3mm one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is a remix of Zack Freedman's Hotswap Disk Sled for Rosewill RSV series cases. The design is all his. I only changed the latch spring.
The original latch uses a 3mm OD spring. I swapped it for a 5mm OD spring because they seem a little easier to find, and there were already some in a multipack I had on hand. Length is the same as the original (10-15mm).
What's included: the modified Latch and Lever, plus an unmodified copy of the original Frame so you can grab everything in one download.
Hardware is the same as the original except for one spring: use a 5mm OD, 10-15mm long compression spring in place of the 3mm OD one. Everything else (screws, big lever spring, drive screws) stays the same.
For print settings and assembly, follow the instructions on the original model page.