1 / 3
NCASE M1 and Lian Li PC-Q33 side panel clips (may fit other lian li cases)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the clips that hold the side panels in on the NCASE M1 and Lian Li PC-Q33 (and maybe other) cases. I've…
- Ocena
- 4,8 / 5
- Polubienia
- 19
- Pobrania
- 346
- Wydruki
- 5
- Wyświetlenia
- 1739
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 6)Remiksy (0)Kolekcje (24)Powiązane
These are the clips that hold the side panels in on the NCASE M1 and Lian Li PC-Q33 (and maybe other) cases.
I've tried in ABS and it works well, so far it's went through a lot of cycles of me taking the panels on and off. Not sure if PLA would be up to the job but it's a small print so ABS should be possible without an enclosure for this. You probably need at least a 0.4mm nozzle but smaller might help for this.
https://ncases.com/products/m1_panel_clips
Category: Computer