Snacker - Your Gaming / TV buddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For all the things you need when gaming / watching favorite series. Compatible with Prusa Mini.
- Ocena
- 4,6 / 5
- Polubienia
- 163
- Pobrania
- 298
- Wydruki
- 5
- Wyświetlenia
- 2243
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the idea of CouchConsole organizer, but wanted to put my Prusa Mini in use, so I designed 3D printable version.
2 sizes depending on your printer / preference:
Prusa Mini: 180mm (max bed size) - I used this model
Prusa i3 and similar: 210mm - not tested
210mm version does not include the spacer (short insert cover) due to the size, so the short inserts are slightly longer to prevent movement.
Features:
Long insert cover can be used as a phone stand and to hold your glasses, controller or remote:
Spacer (180mm version only) used to devide the 2 small insert or as a cover for one of them:
Inserts to store you snacks, chips, candy. Even in the 180mm version, the long insert can fit an Xbox Series controller
0,2mm clearance on all the parts ensures good and tight fit without big movement.
Chamfered bottoms for the best printability.
Tips:
Use ironing for top layers to have better looks.
Use variable layer hight to reduce print time and increase details where it matters.
Print instructions
- I used PLA, but any material will do
- Supports needed for “Cover” and “Cover_long”
- Designed for 3 perimeters with 0,6mm nozzle