PERC H310 40mm fan bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan bracket to mount a Noctua 40mm fan on your PERC H310 HBA
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 332
- Wydruki
- 8
- Wyświetlenia
- 2662
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT: Now updated with a temperature measurement. At 23c ambient the heatsink got up to 38c after writing 250GB's of data to the array.
A fan bracket to mount a Noctua 40mm fan (or presumably any 40mmx10 fan) on your PERC H310 HBA.
I included a little 0.5mm spacer that may help achieve the right friction fit. Alternatively, just scale the model up/down a bit in the Z dimension. Apparently the heatsinks don't have the greatest tolerances.
You probably want to print this in something other than PLA due to its low HDT.
Yes, I'm aware two zip-ties would probably work as well. But where's the fun in that?