PERC H310 40mm fan bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fan bracket to mount a Noctua 40mm fan on your PERC H310 HBA
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 332
- Makes
- 8
- Views
- 2,665
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT: Now updated with a temperature measurement. At 23c ambient the heatsink got up to 38c after writing 250GB's of data to the array.
A fan bracket to mount a Noctua 40mm fan (or presumably any 40mmx10 fan) on your PERC H310 HBA.
I included a little 0.5mm spacer that may help achieve the right friction fit. Alternatively, just scale the model up/down a bit in the Z dimension. Apparently the heatsinks don't have the greatest tolerances.
You probably want to print this in something other than PLA due to its low HDT.
Yes, I'm aware two zip-ties would probably work as well. But where's the fun in that?