Ikea Lack Cable Pass Through
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used a 2" cable pass through from local hardware, and didn't like the hole left on the bottom, so I designed this.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Put simple I used a 2" cable pass through like the one in the pics, and because the Ikea lack tables are hollow it drove me nuts. Then I quickly designed this to press in from the bottom. Looks much better. If you can't find a pass through for the top let me know, and I'll design one real quick to add to this.
.
I printed mine in PETG, but Pla, or PLA + would probably be fine.
35% Infill (Cubic or Gyroid).
.3 Layer Height.
No Support, No Rafts, Brim Optional.
(Only use brim if you have bed adhesion issues).
Please Rate, and post makes. Lets me know posting my models is appreciated , and motivates me to post even super simple designs like this to save someone else the time of having to design it.