Sovol Sv06 90mm fan motherboard box cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motherboard cover for a bigger, quieter fan
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 1218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Hello,
This is a modified motherboard cover, which changes the internal geometry a little bit, adds additional venting holes, but most importantly - creates a space for mounting a 90mm fan.
I glued the duct to the cover with glue, but the fan cover is mounted with snap joints so that it can be taken off if necessary.
I recommend printing the cover panel with a brim and supports, as the corners like to warp up even with PLA and the cable guides have steep overhangs (you can see in the picture how they look without supports lol)
It's the first model I've made myself, if you have any thoughts on what could be better or where I made a mistake, please let me know :)