1 / 7
120/140mm x Noctua Fan Director 45 degree — zdjęcie 1
1 / 7

120/140mm x Noctua Fan Director 45 degree

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

45 Grad Fan Direktor with Noctua Fan

Ocena
5 / 5
Polubienia
37
Pobrania
260
Wydruki
5
Wyświetlenia
1478
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ich habe den 45 Grad Fan Direktor mit dem Unterbau des Noctua Fan Gehäuse genommen und miteinander verbunden.
Somit hat man die Möglichkeit, sie zu schrauben oder so wie ich es gemacht habe, mit Magneten.

Die Magneten erlauben eine superschnelles "Plug-and-play" womit man nicht alle Schrauben entfernen muss, um die Richtung des Fan-Direktors zu ändern.
Support: build plate only with 25 degree Overhang Threshold

Ich habe davon 3x 120mm auf dem Gehäuse(NZXT H7 Elite) liegen um die Abluft meiner 360mm AIO nicht nach oben schießen zu lassen, sondern weg von meinem Schreibtisch. Des Weiteren habe ich eine 140mm Variante innerhalb des Gehäuses gepackt, um mehr Frischluft von den 3 140mm Lüftern von vorne an die GPU zu leiten.
Außerdem habe ich auf der Rückseite einen, damit die heiße Luft, die ausgestoßen wird.

Diese Magnete haben ein Maß von 20x10x2mm, ich füge einen Amazon link hinzu.
https://amzn.eu/d/7u6znTt

gedruckt wurde auf einem Prusa Mini+

I have taken the 45 degree fan director with the base of the Noctua fan housing and connected them together.
Thus, you have the option of screwing them or as I did, with magnets.

The magnets allow for super quick "plug-and-play" with what you don't have to remove all the screws to change the direction of the fan director.
Support: build plate only with 25 degree Overhang Threshold

I have 3x 120mm of them on the case(NZXT H7 Elite) to keep the exhaust of my 360mm AIO from shooting upwards, away from my desk. Furthermore, I packed a 140mm variant inside the case to direct more fresh air from the 3 140mm fans from the front to the GPU.
I also put one on the back to keep the hot air that is expelled.

These magnets measure 20x10x2mm, I'll include an Amazon link.
https://amzn.eu/d/7u6znTt

Printed on a prusa mini+

Print Settings

Printer brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

Yes

Resolution:

0.20 3 Vertical Shells

Infill:

25% Support Cubic with 600% Length infill anchor

Filament brand:

Redline

Filament color:

Black

Filament material:

PLA 1.75mm

Tagi