Extractor fan intake funnel 4' diverse funnel size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ensure the extractor is taking air from the front and not curling air over its body
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ensure the extractor takes air from the front, focuses the extraction where you want it to be and does not curl the air over its body.
Fit by friction!
Built-in guard to protect the fan
For 4' vents (this is a female connector so you may not be able to connect a 4' ventilation hose without stretching it to its limit)
Initially designed for the HZ100 Silent Fan Extractor Duct Hydroponic Inline Exhaust Industrial Vent. However, any duct with an outer diameter of 95.8mm ±1mm will fit well.
There are several dimensions for you to choose from, they vary in size of the rectangular opening. Find one that suits your space and printer.
You may also slice the funnel horizontally to the depth that you need! The print in the picture is sliced from the original file.
Print settings:
Infill: Cubic (barely any infill, consider turning off infill)
perimeters: 3
Top & Bottom layers: 4
Support: Organic
If you find this helpful, please give me a Like! It is much appreciated!