Camera Cold Shoe Offset Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This offset adapter will relocate your cold shoe mount to left or to the right more, this is useful to move Rode Mic
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is model is by Devin Montes, Make Anything on Thangs didn't see any good Cold Shoes Offset adapter on printables so just reuploaded it here for easier access.
I printed this adaptor to make space for the RODE mic on my camera cage. Two versions included since the first one proved to be a bit too fragile. I also printed the second one in ABS, but that may not be necessary depending on what you're mounting!
I ask Devin to make a 28mm version because there's all different types of cold shoe length and width. Also used my Orca Slicer to add a pause in the G-code to add dual filament color, if you want the adapter to go in the opposite direction just mirror the model in you slicer app.
Thanks for downloading! :)
Print Time: 31m
Filament: 5g
Cost: $0.06
Print Settings
- Rafts: No
- Brim: No
- Supports: No
- Resolution: 200
- Infill: 20%
- Infill Pattern: Gyroid
- Infill Combination: No
- Filament: PLA
- Brand: HATCHBOX & Inland
- Color: True Orange, Light Olive, Purple