GEN2 Large Adjustable Steel Sheet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large and fully adjustable tray holder that fits under any table, enclosure, or workbench. fits Vorons, XL, etc.
- Ocena
- 5 / 5
- Polubienia
- 118
- Pobrania
- 524
- Wydruki
- 3
- Wyświetlenia
- 3337
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
 | ||
|
| |
Modular solution for storing large steel sheets under your enclosure or table top. This version is FULLY ADJUSTABLE in width and depth
Supported Printer Sheet Sizes
Ex. Prusa XL, Voron, etc.
Minimum sheet size: Any width x 260mm depth
Maximum sheet size: Any width x 420mm depth
If you have a Prusa MK3/MK4 or a Bambu X1/P1P you will want to the GEN2 Steel Sheet Holder V2 Here
For smaller printers such as the Prusa Mini or Bambu A1 you'll want the GEN2 Adjustable Steel Sheet Holder
This model is part of my GEN2 Modular Rail System and is compatible, stackable, and swappable. This model works well under GEN2 Large Modular Storage Drawers as an example.
Download the GEN2 Interactive Catalog PDF
HARDWARE
• Screwdriver
• Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #16 or #18 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or Scratch Awl
• Magnets (Optional): 10x5x2mm or 10x2mm
• M3 nuts
• M3 Screws M3x8 - M3x10
INSTRUCTIONS
SEE VIDEOS ABOVE FOR DETAILED INSTRUCTIONS (note they are the same as the original GEN2 Steel Sheet Holder other than the rails size is LARGE, meaning this will only work below LARGE rails or LARGE Drawers)
Note: You can also add magnets to the sliding backer slots to create mild attraction to hold steel sheets in place.
INSTALLING RAILS IF NEEDED
• The GEN2 Adjustable Steel Sheet Holder requires 5 rail units. The easiest way to add 5 units is by printing a GEN2 Large Rails V1.1 - Quad Rail and a GEN2 Large Rails V1.1 - Single.
• (Optional) Use templates to mark the hole locations on the surface you are mounting the desired sized rail to.
• Drill out marked locations using a drill bit smaller than the diameter of the wood screw you will be using. (Optional) On Lack tables you can create pilot holes simply using a small scratch awl by applying pressure and rotation.
• Prep the rail for installation by installing M3 nuts into the hexagonal holes. You can use a M3 screw to position and tighten the nut in place.
• Install the rail using wood screws, use at least 1 screw per corner, but add more to prevent bowing of the rails and better surface connection. (extra screw holes are available if you plan to stack more than 2 rows of drawers or contents of heavier than normal weight.)
RECOMMENDED PRINT SETTINGS
Filament: PLA (PETG or ABS for heavier duty storage)
Nozzle Size: 0.4mm
Print Height: 0.2-0.35mm
Infill: 10-20%
GEN2 COMPATIBLE PRINTS | |
Gen2 Open Bin Lack Drawers |  |
Gen2 Gridfinity Drawers |  |
Gen2 Parts Drawers |  |
Gen2 Slim Lack Enclosure Drawers |  |
Gen2 Modular Lack Enclosure Drawers |  |
Gen2 Modular Tilt Drawers |  |
Gen2 Large Modular Tilt Drawers |  |
Gen2 Large Enclosure Bins |  |
PLAN YOUR BUILD IN SECONDS
Not sure which parts fit together? The free GEN2 Planner lets you design your build in 3D, checks every part against your printer size, and hands you the exact print list · no guesswork, no wrong sizes: gen2planner.jerrari3d.com
SUPPORT GEN2 AND UNLOCK MORE
The GEN2 system is free and always will be. If it saves you time or space, you can support the project by joining the Jerrari Club (CAD and STEP files, early access, premium drops) or picking up a premium faceplate collection · it means a lot and directly fuels new designs.
• Jerrari Club: Join here
• Premium faceplates: Decor Faceplate Collections