Soldering Tips Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 6 piece soldering tips case for tips with dimensions under 6.6mm for the diameter and 66.4mm in length.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This model prints in place with built in hinge and clasp. This should accommodate any soldering tips with dimensions under 6.6mm for the diameter and 66.4mm in length. I modeled this with the Weller ST series soldering iron tips in mind.
This should also be able to store CNCKITCHEN's threaded insert adapters for soldering irons.
I would recommend printing it at 0.2mm layer height or less for hinge to work properly.
No supports needed.
V2: larger size detent to catch the lid properly
I have a “wider tips” version to accommodate tips up to 7.2mm in diameter.
Please let me know if you like to see other cases made specifically for your soldering iron.