Small Propulsion Pod for 2206 Brushless Motor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Propulsion Pod for 2206 Brushless Motor for Hand Chuck or Single motor to Twin Conversion
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Small Propulsion Pod for 2206 Brushless Motor for Hand Chuck or Single motor to Twin Conversion. For Flat bottom airfoils. Includes cowl. Has ventilation. I designed this specifically to fit and convert my CG-4A Waco glider from 3Dlabprint to the powered historical version PG-2A. I printed an extra wing for these pods so I could easily fly it with or without power just by switching wings. Pods glue onto wing. Cowling held on with screws. More updates on installation and flights.
What I used
- Colorfabb LW-PLA (active foaming)
- Use best settings for your printer
- 1 Wall
- 5% infill
- 8 grams
- Holds speed controller for motor
- CZ-2206 1450kv Brushless Motor
- https://www.amazon.com/dp/B0BFWNRT1M?ref=ppx_yo2ov_dt_b_fed_asin_title
- 8x3.8 or 7x4 Propeller
- CCW or CW & CCW
- https://www.amazon.com/dp/B07MBDWN4Z?ref=ppx_yo2ov_dt_b_fed_asin_title
- 10 Amp ESC x 2
- #2 machine screws for motor mount and cowl