Liczymy pasujące modele…
This tablet stand was designed to improve the ergonomics of the Wacom One. (for me it works) Has a place to put the stylus. 3mf file included. Only things different than stock .3mm profile is 1 less top layer and 10% infill with a three…
Wacom One PenTablet as Display The Wacom One is a Pentablet / drawing tablet which supports of a 13.3 inch fullhd display, similar to the professional Wacom Cintiq tablets. The connection of Tablet is HDMI in and USB (for Power and…
A Pen holder for the Wacom One pen (For the Wacom CTL-672-N / CTL-672-S). It could also work for other pens, but not checked myself. See https://www.thingiverse.com/thing:4262541 for the FreeCad project file. Print instructions…
This is a direct replica of the VESA mount included with the official Cintiq 16 Adjustable stand. This is required to mount the Cintiq 16 to a adjustable arm or other type of mount. Let's be honest, this piece should be included with the…
Introducing a stand designed for the Intuos Tablet and pen. The pen stand features a Bonsai-inspired design. This stand is available with or without a pocket, allowing you to add weights for enhanced stability. I use lead tape from this…
Update: Nov 2020: I added ver 4B which just has a simpler snap clip to hold pen. UPdate 2019 May: I added a parallel design stl as well. Stylus holder that fits onto the Boox Note tablet. I believe the stylus is a wacom stylus but I do…
a new version of my original wacom pen holder improvements pen stands straight up less filament used pen doesn't wobble around when put in the base
A modest desk stand for a Wacom Intuos 4 (model PTK-440) pen tablet. It allows you to store the tablet in a vertical position, saving desk space and making it less likely to collect dust (or cat hairs 😀) The file size is rather large,…
Color airplane kit. folding is very simple. enjoy printing and share photos of your prints! The Waco YKS-6 aircraft was one of the iconic airplanes of the golden age of aviation in the 1930s. This biplane was known for its robustness and…
You might wanna scale the size in the slicer a bit. For me 103-104% scale worked fine. 0.2mm quality layer height 20% infill Grid support on bed Brim
Stand designed for the pen that came with the Wacom Intuos CTL490 graphics tablet.
I combined two models of a pen holder and David's head scan and then sculpted the details. Note that the model should not exceed 135 mm height (Z axis) or the pen doesn't fit. I used supports for my own print. I used 0.1 layer height with…
Update 02/07/2025 New remix avaiable: Stand for tablet and pencil Update 19/11/2024 Step file has been added. Feel free to make your remix. Uptaded 17/07/2024 Notes: The print time has been significantly improved. Now you only need one…
Check out the updated redesigned version here: Printed on Creality K1 in 15 minutes with Eryone matte black PLA. Walls are 1.5mm thick so it is quite light, I recommend adding something heavy on the inside and then glueing something like…
-Material: ~ 30 gm -Printing time: ~ 5 hrs -Recommended quality: 0.2 mm -Dimensions: 156 x 62 x 13 mm If you like my work, don't forget to buy me a coffee ☕ You can also follow me on my social networks: Linktree: https://linktr.ee/Alitaria
This is a simple to print, yet good looking stand for the pan that comes with the Wacom Intuos M drawing tablet. Depending on the dimensional accuracy of your printer, it might be necessary to scale the print up a bit. Support If you'd…
A simple wall mount for a Wacom Intuos 7.9" x 6.3" (or other similarly sized) drawing tablet. Can be used for wired or wireless versions. Prints easily without supports. Post-Printing Glue the two pieces together as shown, with the tab on…
Untertischhalterung passend für ein Wacom Intuos Medium Grafiktablett. Keine Stützstruktur notwendig. Verkürzte Druckzeit. Underdesk mount suitable for a Wacom Intuos Medium graphics tablet. No supports needed. Shorter printtime.
An absolutely massive grip replacement for wacom grip or pro pens (mine is years old so I'm not sure how much they've changed) Just disassemble the grip of your stylus and slide this piece over and put everything back on. If it sticks I…
Created a holder that slots into the side (left or right) of the Wacom Cintiq 16 for use with the Wacom remote. Lower cut-out to access the power on button, the remote fits securely within the holder to prevent moving around during use.…
Use your leftover Filament for a replacement for the Wacom Tablet (Wacom One CTL-672) Pen nibs. To be clear... YOU DON'T NEED A 3D PRINTER (I just attached a sliced gcode and a STL because it's needed for the "last meter contest") You…
This is an alternative model of engine cylinder for an RC airplane WACO YMF – 5. The original model was created by 3Dlabprint and is available on their website https://3dlabprint.com/shop/wacoymf5/. This model doesn't have as much…
Remixing Alex Berkowitz's wonderful Wacom Drawing Tablet Wall Mount with Skadis hooks instead of holes for adhesives.
I needed a holder for my tablet when I'm not using it, so here it is. This is basically my first model in fusion so it's pretty simplistic. The .3 inch models are for a Wacom CTL-472. The pen holder version obviously holds a 472 pen but I…
Comfort grip for a Wacom Intuos Pen and Touch stylus (model LP190K), lightly inspired by the shape of the Wacom Airbrush Pen. The STL includes a separate part to use as a modifier for the fuzzy skin portion of the grip. Best printed…
Made this stand to hold my medium Intuos Pro. They changed the size of the pen holder, so I made this to accommodate the larger one. I also made a version that let me wrap up the cable and fit it into the back slot. Print Settings Printer…
Knurled grip for the Wacom CTL-471 pen.
1:1 perfect replacement threaded pen cap and side switch for WACOM Intuos 4 & 5 series digital pens.
Stands your tablet and pen vertically while taking minimal desk space. I don't know if different versions are different sizes, the small wired version is the one I designed it for: https://www.amazon.com/gp/product/B079HL9YSF/ Opening is…
Soft Grip for Apple Pencil – Improved Drawing Comfort This soft grip is designed to enhance the drawing feel of the Apple Pencil. It was created at the request of an illustrator who has worked on a famous Japanese robot anime. The grip…
Made a stand for my old Wacom Intuos digitizer tablet. Included a slot behind the tablet to more securely store the pen while in stored, or to hold it when using the tablet. Also has a little slot in the middle that I use to store the…
“Cockmill” or “windmill”, standing on a pole to show wind direction & speed. Inspired from wako biplane for a nice rendering. Large model, 640 x 640 mm. Not suitable for small printer, needs a large 350x350mm board for the wings. Some…
Print Settings Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 20% Filament brand: Smartfil Filament color: green Filament material: PLA
yet another Wacom One (ctl-471) stand Category: Accessories
Origin: This model came to be from a very specific demand: My girlfriend has an iPad with a wireless keyboard that attaches via magnets to the cover. When she used the cover as a stand (behind the iPad), the keyboard would slide when…
Printing plastic replacement parts is the what makes 3D printers really useful. Even though these nibs for the graphic tablet pens are probably not easy to print due to their small size I wanted to try it. So I measured the diameter of an…
Holder for Graphic Pen (Huion, Wacom, …) Hey maker! 👋 A handy little helper for your graphics tablet. Features: Holds your 3D pen or stylus neatly. Stick it to the side of your tablet with double-sided tape. Keeps your workspace organized…
Summary Title: Wacom Pen Holder - No Supports Needed (Designed with Grasshopper for Rhino 3D) Description: Elevate your workspace with this sleek and functional Wacom Pen Holder, meticulously crafted using Grasshopper for Rhino 3D.…
A holder for the Wacom Bamboo Ink 2nd gen stylus, designed to fit into your USB Port. The holder provides a small gap for the buttons to slide through. The holder is designed for the Wacom Bamboo Ink 2nd gen stylus but other pens with the…
Untertischhalterung passend für ein Wacom Intuos Medium Grafiktablett. Mit Supports drucken. Underdesk mount suitable for a Wacom Intuos Medium graphics tablet. Print with supports.
Lost the button from my Wacom Intuos 3 stylus, so I designed and printed a new one! Works perfectly. Instructions I had good success printing at a layer thickness of 0.15 mm, extrusion width of 0.35 mm. (.35mm hotend). and 3 loops around…
Adapted flatsixguy's K400 holder into a top-mount bracket for the 22'' Wacom Cintiq (2019 version - model DTK2260K0A). Sits on top of the tablet - works best with the tablet tilted. With the tablet vertical (90 degrees upright/flat), the…
A small simple stand I did for storing my Wacom Intuos vertically to save space. Feel free to remix, change, whatever and share... .step file and .f3d file included.
Just a small rock shaped pen holder for my Wacom Intuos One Drawing Tablet. My goal was to make it as small as possible, but it should be rock-stable, that the pen doesn't tip over. So I tried designing a rock shape with a fitting cavity…
Ständer für Wacom One Tablet. Der Schlitz ist breit genug um mit Velour beklebt zu werden, damit das Tablett nicht zerkratzt wird. ……… Stand for Wacom One tablet. The slot is wide enough to cover with velour to prevent the tablet from…
This is a simple tilt base/holder for a Wacom Intous Pro M graphic tablet with a penholder and spare tips. I printed it with PETG (PLA is also fine) and added some rubber to the top and bottom to prevent moving. The parts are glued…
A Wacom pen holder featuring a nibs storage compartment, taking inspiration from similar commercial designs. Can be printed without supports. The Top part should be printed upside down (threads up). Please note that for the threads to…
Holder for Wacom Intous pen (11,4mm diameter)
Yellow Biplane Over the Mountains Category: Vehicles
I printed it on Anycubic Photon mono X 6k. Supports should be used on bottom side.
We had a few Wacom Cintiq Pro 24 tablet displays at an office I used to work at, and over the years accessories tend to go missing. One of the displays no longer had the stylus clip that came with it, so I borrowed another display's clip…
My dog chewed my Wacom Intuos pen, so i made a replacement grip, and button, the button is madewithtinkercad https://www.thingiverse.com/thing:1249458 and the grip is printed in flexible filament (filaflex) Print Settings Printer Brand:…
This print is made of 2 parts and is designed to hold your graphic tablet pen wacom intuos size is about 6'or 16,5mm. It's straight out of the printer no post processing. printed on my I3 MK3.
Super simple pen holder for the Wacom tablet. Print instructions Unassociated tags: Wacom tablet Category: Computer
A minimal space pen holder made for the Wacom Pro Pen, but would probably work with any drawing pad stylus. Adding a color change for a few layers allows for the floor symbol to be a different color than the rest of the model. The…
I just needed a more stable base, so it's a simple round shape added to the original. Then I had enough place to write Wacom, so why not. My pen is the standard one from the Intuos PTK-440, it works fine.
The Wacom Pen Tip Holder is a 3D printable solution for storing up to 6 replacement tips for Wacom pens. Measuring 44mm x 32mm, it features a simple design that screws together for easy assembly. Perfect for keeping your Wacom pen tips…
A holder for my already very well used intuos wacom pen Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: filaform pla black Notes: i used filament for the…
This IKEA Skadis holder for Wacom Pens utilizes the original round base (which stores your replacement tips). Because I wanted maximum strength, I decided to push-attach the hooks so they can be printed in a more preferred orientation. If…
This holder may not be of much universal use, I still thought to share it. I specifically designed it to go onto the back of my table-mounted Skadis pegboard, else it would block a lot of space. Also, I wanted to slide it in and out of…
Needed a stand for the pen to my Wacom one drawing tablet. The one i have is the older model, don't know if the new one will fit. The model is designed to have the pen going in straight from the top and then lean into the cutout to hold…
No supports needed. Just print. Optionally you can secure it with a thick 2-sided tape. Feel free to adjust and modify to suit your needs - i include the flat .svg vector profile for Cintiq 24HD, that can be used as a base for your…
Features This is a pair of Gridfinity bins for the Wacom Intuos S graphics drawing tablet (affiliate link), compatible with the Gridfinity system . The bins are a 1x1 for the pen, and 1x5 for the tablet. Both bins are very stable, and…
I remixed the Wacom Intuos Grip ergonomic by Caramac and the Wacom One pen sleeve by asdf1711 to make an ergonomic grip for the Wacom One pen for my friend to use for OSU!
Purchased a new Wacom Cintiq 27 Pro and don't feel like shelling out for the $40 extension table addon that wacom should have provided with the unit in the first place? 3d printing to the rescue! I printed this face down, PETG and around…
A simple Wacom Bamboo stylus holder. Wondering if your stylus will fit? The hole is 11mm diameter. Category: Art Tools
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi ! I needed a new nib stand for my Wacom Cintiq Pro 13. After a look around, I found Bad Voxel's design. After printing it I realized…
Replace the original rubber grip from your Wacom Intuos 4 pen. The rocker extension is great for heavy users of middle and right click. Print Settings Supports: No Resolution: .2 .4 nozzle with .4 wall thickness, 3 wall count, no infill…
Lost it some time ago ? Now is the time to make your own using a 3d printer ^^ Category: Art Tools
I wanted somewhere to quickly set the stylus that would be out of the way when not in use so I came up with this. I used copper bbs and hot glue in the hallow cavity to add weight it isn't necessary but it is nice.
Use 0.2 layer for this model
Extra parts for building the 3DLabPrint's Waco YMF-5 model as a display piece, as featured in the Prusa Academy 3D print postprocessing course. A list of parts with a few notes: The exhausts belong on the bottom side of the engine…
A good minimal but sturdy sliding case for the Wacon Pro pen 2. This case slides open and sepperates. Closed it hooks together so it will not open in a bag. Hexagonal for anti rolling. Protect that fragile pen from falling or damage in a…
A simple pen holder for the Cintiq 22HD. Just unscrew one of the middle screws on the sides, slide the holder into the screw slot and re-tighten the screw. Should fit both sides, just flip the model in the slicer. The holder tube is…
I needed a new phone holder for my desk so I made this. Added a place for my Wacom pen too. (could be used for any pen too) The space for the phone was designed specifically for my Pixel 3. but it is large enough for most modern phones (I…
small stand for Wacom intuos M/S and the Wacom intuos pen Not tested for other tablets, Wacom and more, or the Intuos L
A very slim, minimalistic holder for Wacom Pens, to attach them to an IKEA Skadis pegboard. A good solution if you want to waste minimal space and don't hook any other Wacom accessories. Might interfere with thicker grips. If you would…
A set of chocks with the correct scale and height, as the wheel pants of the WACO are rather low. Additionally, the font and back chocks are joined which ensures that they will not shift if e.g. the plane is bumped.
I created this base for my sister's drawing tablet, it answers 3 pain points: Have a thicker/supportive edge where she could more easily rest her hand Keep the pen always at hand in a nice, accessible position Be reversible as she changes…
Our Wacom One tablet is used extensively with a laptop. It is constantly moving around. For the first few weeks the cable connector holds, then it starts to loosen. Eventually you must hold the cable connector for the tablet to work. If…
Slight modification of https://www.printables.com/model/540625-wacom-pen-holder to be able to add extra weight using Infill Density while printing. I printed it with 100% infill density and a 0.12 mm layer height using matte black PLA. It…
This is a keyboard tray I made to place the keyboard above the Cintiq monitor and out of the way. The model is designed for the 22" monitor. Feel free to download and modify for your need. If you reupload please mention me in the notes…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus I printed this in PLA on a fast setting and it works great! Awesome model
Print chage-it use-it! and post your makes!
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi ! I looked around at different stands for ipads to remix for my Wacom Pro 13, but wanted something a bit more sturdy. So I came up…
A stand for Wacom Pen Tablet CTL-672. The size is 120x55 mm. The slot width is 7.6 mm.
vertical stand for wacom cintiq, also works for iPad
another cute pudding pen stand, this time for the wacom pro pen 2, you can put 6 nibs in the bottom part and a delicious cherry if you'd like! printed in white matte PLA, sanded and hand painted with acrylics for the pudding parts: print…
Wacom MovinkPad Pro 14 body model. =/- .2mm tolerance to dimensions. .1x.1mm seams are a visual representation body and bezel frames and not and actual part of the device. I created this because good case options for this thing are…
Halter für den Schreibtisch für den Stift des Wacom Intous - Tablet
I broke the decorative plastic part on my stylus, and I created my own version that functions perfectly and combines the space of the button and the decorative part on the original Wacom Intuos Pro Pen 2 stylus. I think it will be useful…
Quick mount to attach the power brick under your desk and clear up some space.
Holder for BabyBay bedside crib with cutout for Waco baby monitor. M5 bolt and nut needed for assembly - i didn't have a nut so i printed one from from G-workz3D .
Wanted to secure my pen cut to the Cinque 24HD, regardless of Angle. clips to lower left edge
A simple pen holder for the Wacom one, includes slots for tips and tip remover.
Want to clear off some of your precious desktop space? The Wacom Intuos4 tablet is quite large, and when not in use, takes up lots of desktop real estate. I made this bracket to set it up on the the wall just above my desk, within easy…
When mounting and dismounting the motor mount I noticed what a hassle it was to insert the nuts and screws for mounting the motor into the motor mount. I also realized that if I was planning to use the motor in a different model the…
Dual Pen Holder For Wacom Cintiq Studio Pro
Remix of the Wacom tablet holder by alexberkowitz for my slightly larger tablet. Works exactly the same.
![Wacom [Intuos 3] Pen Holder](https://media.printables.com/media/prints/443870/images/3665105_021da6b9-dbb8-41d2-9f4e-a50efc4abd7c/wacom_intuos_pen_holder_display_large_443870.jpg)
