Liczymy pasujące modele…
Ridiculously over-engineered printed-in-place no support no brim adjustable tilting phone stand. I like to design things and i also like to challenge myself ! So one thing leads to another even if the design is complete madness ;-) Be…
Wydruk około 5,38 €–6,57 € nettoWstępna wycena jednego wariantu
From the well received GREATEST Towel Hook V2 now an Remixed Version that can be hang on a door without using tape or screw I really liked the original model but i didn't want to attach it with tape or screw, so i remixed it to be hang on…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Print in Place No Support Compact Folding Dice Tower Box Be advised, this model is not suitable for large D&D dice, you should instead print the bigger and easier to print Dice Tower if you plan to use it with D&D dice Compact Folding…
Wydruk około 8,53 €–10,43 € nettoWstępna wycena jednego wariantu
Check my newest version of this squeezer https://www.printables.com/model/1832705-ratchet-toothpaste-tube-squeezer Features Fits larger tubes More comfortable to use Much easier to load Print instructions Print settings : 0.20mm…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Features Bigger, Better & Easier to print Each part can be printed individually The long bridge can be printed using support This is an updated version of my previous Dice Tower Be advised this model may be hard to print Your printer must…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
I like things that are not permanent, easy to install or remove so i created my own Screwless IKEA SKADIS Wall Mount using 3M Command Large Picture Hanging Strips What you need IKEA SKADIS Board or 3D Printed SKADIS Board 3M Command Large…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really like this model but it was missing a pen holder :-( So i remixed the Sticky/Post-it note holder with parametric stencil to add a pen holder Note that I remixed this as an add-on so the original designer receives credit and…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Remix of my IKEA Halvklart lithophane picture frame New back design Added more stars New button What you need Printed parts (frame, cover, button) IKEA Halvklart USB LED spolight Don't forget to look at the remixes that use different…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Thanks to @JanTec for featuring my model on YouTube (from 3:33 with English captions) Features Easy to print, easy to install Works very well with cardboard spool Simple, no bearings, just two PTFE tubes Slides over the Spool Holder for…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
Cute Sheep Toilet Holder Remix Print Instructions Default Prusa Slicer 0.10mm ~ 0.20mm Quality Print settings Filament : Black PLA, PETG Perimeters : 2~3 Support : None Brim : None Change Log 2024-02-26 (V2) Sheep Toilet Paper Holder…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is a remix of the original Prusa Mini Z-axis brace published by Hannes-b3 Small groove to fit with the Prusa Mini Low Profile Z axis Squash Ball by 4nthonylin Bigger holes to fit with M5 Hex Socket Head Cap Screws Added model Ultra…
Wydruk około 4,11 €–5,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easily customizable and removable IKEA SKADIS Jumper Wire Holder and Organizer it can holds up to 4 different lengths of jumper wires Assembly This model has a very tight fit You may need a hammer to insert the beams You can resize the…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
180° Tablet Holder Hinge for the Multifunction Arm Mounting System (Small Arm System) What you need Printed parts Multifunction Arm mounting system (Small Arm System) Multifunction Arm mounting system Spinning Adapter Big Clamp For Small…
Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu
Another simple but elegant toothpaste squeezer ;-) Print Instructions Parts are oriented in the correct position Filament PETG (PLA maybe not) Nozzle diameter : 0.40 mm Default 0.20mm QUALITY PrusaSlicer Print Settings Perimeters : 3 No…
Wydruk około 2,34 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zombicide 2nd Edition Box Organizer and Zombie Tray Remix I liked the original model but wanted something a little more rigid
Wydruk około 2,46 €–3,00 € nettoWstępna wycena jednego wariantu
Features Stand is suitable for a 14 mm thick tablet or phone Easy to resize for bigger phone or tablet Inclination of the stand is adjustable Print Instructions Don't print the 3dview Print the base and the holder individually Use Default…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
This is a « LED base » for the Christmas tree v³ Led lamp made by Falco The Christmas tree is lit by an IKEA HALVKLART LED spotlight Print instructions Filament : PLA or PETG Nozzle : 0.40mm Perimeters : 2 Support : No HALVKLART Base…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
This is a Parametric PCB Case made with Fusion 360 Print instructions Open the f3d file in Fusion 360 Change all the parameters that fits your needs Convert parts to mesh bodies and output them to stl files or to your slicer Slice and Print
Wydruk około 7,09 €–8,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really liked the Windmill - 100% Printable and I also really liked the design of the Windmill Wind Turbine rotor So, I couldn't resist merging these two beautiful designs together Features Reuses original parts from both wind mills…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
This is a REMIX of the Articulating Raspberry Pi Camera Mount for the Prusa Mk3 Note that i did not modify or create new components, i assembled some components together to obtain a simple Raspberry Pi Camera Mount for the Prusa Mini Thx…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
The making of my Lack Enclosure was a very long journey but it was worth it I thank all the other makers who inspired and helped remix my own parts I hope this remix will inspired you to do the same ! Features Fully customizable and…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
100x100 mm lithophane picture frame backlit by a Halvklart Spotlight What you need Printed parts (base, cover, button) Halvklart USB LED spolight 100x100 mm lithophane How to print your own lithophane Also, look under the section “Photos…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple way to use the Spiral Vase Rose as a Night Light What you need Spiral Vase Rose (50mm) IKEA Halvklart LED This model Print instructions It is a tight fit, make sure your printer is well calibrated The model is already oriented in…
Wydruk około 1,54 €–1,89 € nettoWstępna wycena jednego wariantu
Thin Hobby Xacto Knife Features compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces better threads for best…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a REMIX of the Rugged iPhone 12 Mini Case made by estrato found on Thingiverse I modified the case so i could use different infill as a pattern for the back Print instructions Print the Rugged iPhone 12 mini case in PETG Open the…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lamp that casts a shadow on the wall What you need This 3D printed model Any 2mm wire frame images or Customizable Snow Globe IKEA HALVKLART LED Spotlight and/or Shadow Lamp Candle Holder Assembly intructions Remove the IKEA HALVKLART LED…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
Features Easy to print and install Only 1 plate to print (5 small parts) Reuse the existing hardware (bolts and nuts) Folds completely to the side of the printer when used with the optional 270° Hinge for Original Prusa Enclosure What you…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tablet Holder for the Multifunction (Small) Arm mounting system Features Fits tablet-holder-small-[L, R] Fits a Galaxy Tab A8 Change Log 2025-01-01 Added the Step file as requested by @Ferrugius
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Hobby Xacto Knife with Blade Container Features blade container interchangeable handles compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the Designer Towel Hook that fits a 16mm thick kitchen cabinet door
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Retractable Xacto Knife Features compact with retractable blade compatible with no10 and no11 blade Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This remix includes both the gyroscope and the optical illusion You can print and use them separately or mix and match them to use together The connectors are made for the MINI but i added an adaptor for the MK3 No magnets required Print…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a IKEA TISKEN replacement hook remix of the IKEA STUGVIK / TISKEN attachment (exact size) printed in two parts with no support careful, it's a very tight fit
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Battery Backpack that clips onto a LilyGO T-Display-S3 Features Fits MakerFocus 1000mAh Lithium battery ( 42 x 25 x 11mm ) Change Log 2026-11-06 Added a base that holds the LiLyGO T-Display-S3 BattPack at an angle 2024-11-08 This latest…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
This remix includes both the gyroscope and the optical illusion. You can print and use them separately or mix and match them to use together The x-axis connectors are made for the Prusa Mini+ but should be compatible with the Prusa MK3.…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my REMIX of the Picture frame (A4) that fit a US Letter portrait size picture or photo Model consists of 4 bars (two sides, upper and lower one) 4 connection pieces 2 back panels 1 3M holder Use the connection pieces to connect…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
You might want to look at my recent Adjustable Exhaust v3 Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a REMIX of the iPhone Charging Stand with Lightning Connection that holds an iPhone 12 Mini with a Quad Lock case and a Belt Clip
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple and easy to print small tube squeezer that makes sure you get all the content out of the tube without wasting any insert the bottom of the small tube in the big opening slide the small tube to the other side and squeeze it
Wydruk około 0,45 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What you need IKEA TISKEN Printed Part(s) Soap Dish Holder Optional Soap Dish Container Soap Dish Hook Print Instruction Nozzle diameter : 0.40mm Use Default Prusa Slicer 0.20mm IS Structural Print Settings Filament : PLA or PETG Infill :…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Features Fits an iPhone 12 Mini with a Quad Lock case Clicker is thicker and protrudes from the base Base is smaller and straighter Allows use of silicone pads Differences compared to the original Adjusted dimensions to fit an iPhone 12…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena jednego wariantu
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Features Transform the "Dice Tower Castle Stairs" into a box Safely store and transport dice Fits 26mm dice Print Intructions PRINTER : Original Prusa MK4S HF0.4 nozzle (with or without MMU) Print settings : 0.20mm STRUCTURAL Infill :…
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
Very simple remix I made for my filament buffer so I could easily reference the numbers Features Choice of 2 plates numbered in ascending or descending order according to your needs Added an Improved Bottom Plate Holder to use with the…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Why settle for just one hook when you can have two :-)
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
I changed my Raspberry Pi camera for a Logitech C920 so I had to make a new mounting bracket Note that i did not modify or create new components, i assembled some existing components to obtain a simple Logitech C920 Camera Mout for the…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compatibility BTT PI TFT43 DIP Raspberry Pi 4 Print Instructions Use Default Prusa Slicer 0.20mm Quality Print Settings Nozzle Diameter : 0.40mm Filament : PLA or PETG Infill : Gyroid 25% Perimeters : 3 Supports Support on build plate…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
This is a Simple 3 Parts Rotating Tablet Stand for Ikea Lack Enclosure 1 tablet stand 1 threaded cap 1 bottom corner
Wydruk około 3,10 €–3,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print lets you mount an IKEA Halvklart USB LED spotlight to the Articulated Raspberry Pi Camera What you need Articulated Raspberry Pi camera LED IKEA Halvklart USB spotlight The printed parts Print instructions It is a tight fit,…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was unable to find the required magnets for the Optical Illusion Visualizer for Prusa Mini So i tried my best to make a remix inspired by the MK3S optical illusion for x-axis The connector is made for the Purse Mini+ but should be…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a my 3D printable version of the Wall Mount Module for the ResMed AirMini CPAP Print Instructions Print in PETG Nozzle Diameter 0.4 mm Layer Height: 0.2 mm Perimeters : 3 Support in build plate only Overhang threshold: 40 degre XY…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What you need Dummy 13 Version 1.0! printed at 250% KAPPLAKE LED spotlight Printed parts bed1 : spotlight bed2 : cover & button bed3 : cable_adapter
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the Removable pinned hinge doors for the Ikea lack Enclosure The new hinge incorporates locking bolts to hold the plexiglass in place NOTE This model is obsolete, but you may have a look at my latest version…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for my Kaleidoscope Coaster Features Allows to use the coaster as decoration while highlighting its beautiful visual effect Print Instructions Nozzle diameter : 0.40mm Filament : PLA, PETG Holder Default 0.30mm DRAFT Print settings…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
This is a Spool Holder/Roller that fits a Rubbermaid Filament Dry Box This model is inspired by the XL Filament Spool Holder
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Snap-on Holder for Razor Quick Charging Stand for PS5 Controler Fits on 19x19 mm support beam
Wydruk około 4,20 €–5,14 € nettoWstępna wycena jednego wariantu
This model can be use to hang the ResMed AirMini CPAP to a Dodge Grand Caravan coat hook What you need ResMed AirMini CPAP Wall Mount Module 2x M2x8 Hex Socket Head Cap Screws and Nuts Print Instructions Print in PETG Nozzle Diameter 0.4…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This duct let you use a NOMA Personal Air Purifier to filter out the small filament particules
Wydruk około 1,52 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a REMIX of the Raspberry Pi Z-Box Integrated 4B Case for Prusa MINI I modified the case to use it with the Prusa mini squashball back foot redo/fix (REMIX) * * note that i included the foot that goes with the case Print…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
IPA Squeeze Bottle and Cotton Pad Holder Features Holds small IPA Squeeze Bottle (51mm) and Round Cotton Pads Versatile can be mounted on the Original Prusa Enclosure can be hung on the IKEA SKADIS Pegboard can be simply placed on your…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
This is a REMIX of the Prusa mini squashball back foot redo/fix Remixed it to use it with the Raspberry Pi Z-Box Integrated 4B Case for Prusa MINI (REMIX) Print instructions It is a tight fit, make sure your printer is well calibrated if…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The raised floor is use to separate the silica gel desiccant from the spool holder. Note that i splitted the model in half to be able to print it on the MINI and that i added a modifier in Prusaslicer to change the infill pattern and the…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Remix of my WebCam Mount for Lack Enclosure to fit an Ikea Halvklart USB LED light The USB LED light is plugged into the USB port of my Prusa MINI so it is always on when my printer is running I use a WEMO Smart Plug with OctoPrint to…
Wydruk około 3,48 €–4,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a bumper case for the Arduino UNO MINI Limited Edition
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Remix of the Designer Towel Hook that fits a NOVA KOOL R1600 Refrigerator
Wydruk około 1,96 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
iROCKER Pump Adaptor for the QuikPak Inflatable Kayak. The tip of the 2 iROCKER pumps was slightly different so I had to make 2 distinct adaptors iROCKER Full Throttle Hand Pump Adaptor iROCKER Electric Pump Adaptor
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Sterilite Step-on WasteBasket Pedal broke a while ago, so i challenged myself to design a replacement part Features Printable on a Prusa Mini Print Instructions Nozzle diameter : 0.40mm Filament : PLA (for rigidity) Perimeters : 3…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Container for the True Stainless Steel Cocktail Picks Container
Wydruk około 5,52 €–6,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the Two Dice Box made by alxgarza Added battery cover for easy access Added colored dices faces & edges Print Instructions It is a tight fit, make sure your printer is well calibrated Print the parts in PLA Nozzle…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Here is my take on the very popular "Infinity Cube" with a twist ! Features Easy to print in single or multiple colors Model can be printed in one or more colors with or without a MMU Easy to assemble Templates are provided for easy…
I saw broom grippers in store the other day so I challenged myself to design my own You can choose between 3M strips, double side tape* or screws* to install it However i have not tested the versions that uses double side tape or screws…
Fully Printable Dry Box Spool Holder and Container (v3.0) I hope you enjoy printing and using this DryBox as much as i enjoyed designing it Features Fully printable on a Prusa MK4 Mountable on top OR inside the Original Prusa Enclosure…
Dust cover for the PolyDryer with integrated grooves that allow you to stack the Dry Box on top of the dryer to save space when not in use
Improved Ratchet Toothpaste Tube Squeezer Features Easy to print and assemble Much easier to load & unload The toothpaste tube can stand upright If you like this model, please, take the time to leave a make or a comment! Assembly Thanks…
Why only use the IKEA TISKEN ridiculously small hook when you can replace it with by a longer one and maybe even use two or even three What you need IKEA TISKEN Print Instruction Nozzle diameter : 0.40mm Use Default Prusa Slicer 0.20mm…
Driveshaft Grinding Jig for the Wet Biscuit Upgrade Pack 2 P.S. Use two M3x6 screws to hold the brass rod in place
Easy to reload paper roll holder Features can be used to hold paper towel or toilet paper can be mounted on a wall or a SKADIS pegboard fits on existing 15x24mm toilet paper roll holder base Print instructions Filament : PLA Pro/Plus or…
AM32 ESC Mount for the Wet Biscuit
Radiomaster ER3C-i Receiver Mount for the Wet Biscuit
Motor Guard for the Wet Biscuit
Spektrum 3S 800mAh Li-Po Holder for the Wet Biscuit
OCS-D008-A Servo Mount for the Wet Biscuit P.S. I use small piece of filament to hold the Servo in place ;-)
Avoid freezing-cold fingers Use a Mr. Freeze Jumbo Freeze Pops holder ! Assembly Slide the "ratchet" into the "handle" Make sure the "square notch" is facing outwards Make sure the "ratchet" is properly aligned within the "handle" Slide…
Print Instructions Print settings : Prusa Slicer 0.20mm BALANCED Printer : Prusa Core One HF0.4 nozzle Filament : Generic PETG or PLA Assembly Instructions Requires Skadis Hook with Dovetail
To wszystkie aktualnie dostępne wyniki.
