Liczymy pasujące modele…
Background I wanted to print the original with rails however because of the fillets they would require supports or would print with droops. I used the provided f3d file to slightly narrow the bridge and instead use a chamfer on the rails…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As a Type 1 Diabetic I need to inject insulin daily to live. This insulin also has to be stored in the fridge but when I used to stack them in the shelf on the door if more than 2 boxes were stacked up they'd slide over the top of the…
Wydruk około 12,36 €–15,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Battery cover for Tonka #06744 garbage/trash truck toy. Print instructions I printed it in blue overture PETG and it very nicely matches the blue of the toy. Supports help keep the two bottom tabs flat and give it a tight fit. I used an…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
General When we were decorating our kids' bedroom we wanted some reading lights near the beds but didn't want to drill holes in the wall in case we changed our minds later. The wall sconces we bought came with some metal mount plates that…
Wydruk około 1,52 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
General I wanted a simple and fast test pattern that got to testing the farthest corners of my bed early in the print and then had plenty of time for me to adjust the z offset so that my prints would stick all the way to the edge of my…
Background I set out to make this remix because all the other track clamps I printed and used would break at the same spot along the layer lines on the sides of the square pieces that interface with the tracks (see picture below). This…
General My kids love their Yoto Player but the cards were constantly getting misplaced and left laying around. I didn‘t like existing table top designs due to the space they take up so I drew this one up to store 10 cards on the wall. The…
Design My boys have several caps each and I was tired of them laying around or being stacked on surfaces taking up space. I modeled this simple hook which is wall mounted with a single screw and can hold at least 4 hats; maybe more…
I remixed the original to fix a few issues I found when using it with my masking/painters tape. Problems The U shape that slid on from the side This design of the original made the model inherently roll thickness specific so as you used…
General My son wanted a lego themed cake so I modeled and printed the 6 and it was a big hit. I added the others for everyone to enjoy as they celebrate birthdays with their loved ones. I obviously haven’t printed them all so I would love…
I printed the original and can say it works well and prints fast but I found myself needing a way to get the filament boogers off the back side of my nozzle too. So I made this remix to make the handle hole useful. You can use this just…
General I remixed the original as I didn't want to have to use any hardware and I also wanted to increase the inner diameter for some extra clearance on my bucket. The original had a inner diameter of 4mm but that made for a tight enough…
General This is a remix but I ended up re-drawing it from scratch with that model as inspiration when I realized I wanted to change several things. Mine has smaller holes to accommodate my 6" long glue sticks which are 7mm in diameter…
Remixed the original to scale it up as well as add a simple stick to the bottom for decorating a cake.
Description I tried the original and it was VERY close to working for the MK4 however the extruder sticks up a bit higher so I modified it to clear the nextruder on the MK4. While I was in there making edits I decided to add some nubs to…
General When I started working from home during covid lockdowns I found myself using my iPhone most of the time for my work video calls. This worked great except that the angle of my wireless charger wasn't ideal for video. I needed a…
General Wanted a simple topper for decorating cupcakes for my kid’s 2nd birthday. I drew up the famous Mickey Mouse silhouette based on some ratios I found online and added a 2. Customization This could easily be scaled up for use on a…
General I started with the original model and remixed the flag stick to be flat on one side for better printing and also shortened it so that it fits diagonally on a 180cm square bed (Prusa Mini or otherwise). I also created the phone…
General: I wanted a way to mount my LCD on the side of of my Z axis (or near there) in order to free up the right side of the Y extrusion for a better angle for my Octoprint webcam. When I didn't find any good options I decided to design…
Background & Design I used to tuck small photos of my family into the small plastic trim that went around my headliner in my older car but upon getting a new car I found this trim has been eliminated for a more sleek trimless look with…
General I wanted a small container to mount near my printer for purge lines, brims and other small bits of trash. I found several options but as always didn't find exactly what I was picturing so I designed this with a couple goals in…
General My son recently began piano lessons which meant we now have the piano in the living room on the classic folding X style stand. He uses headphones most of the time but then when he's done they end up on the floor or perched on top…
General I just got my DELACK enclosure and started putting together a list of parts to print and wanted to use my Wyze Cam V2 so I remixed the original mount that supported the V3 to have a slot that the V2 can slide into since the V2…
General These replacement parts are for the CubicFun hahaland Race Track Adventure Toy pictured above. My kids love this thing but it gets a lot of abuse between my 3 toddlers so I've modeled replacement parts as they've gotten broken.…
I wanted an easily replaceable bracket that could snap over my wireless charger to help auto align my AirPods and iPhone. I designed this so that the main top cutout aligns my AirPods Pro case and the right edge of the bracket can be used…
Background I use the OhSnap! 1.0 grip for my phone and was sad to see they have stopped making the 1.0 accessories in favor of their 2.0 system. I am happy with my current 1.0 grip and needed a second stand for my office desk in addition…
I made this simple fridge magnet based on a US 1 gallon milk jug. I included my file which has pockets designed in for 6x3mm magnets but also a solid model so that you can use modifiers in the slicer to add your own magnets as desired. If…
General I have a small Franklin hand pump for airing up sports balls and children's bikes but the pouch it came with for storage has no way to hang it up. I designed this simple slotted adapter to allow the flap from the top of the pouch…
General I recently bought a 4pack of these touchup paint pens that allow you to fill them with your various paints for around the house and have them handy for quick touchups. I realized i wanted some way to store them upright out of the…
Background I printed the 150mm tall purge bin from @DominikChuchl_135645 and really liked how it fit and functioned however I wanted to be able to have the bin as far up under the discharge hole as I could get it. I tried the original…
To wszystkie aktualnie dostępne wyniki.
