Liczymy pasujące modele…
Print at 0.2mm Layers, start changing after the second layer Color Order: Fillamentum Muhka (beige) DasFilament Kastanienbraun (brown) DasFilament Saphirblau (PETG via M Code) (blue) 3DJake pastell rosa (pink) 3DJake Gold (yellow) 3DJake…
print at 0,2mm layer height, change the color after the second layer. Color order: Fillamentum Muhka (darker beige) OWL Elfenbein (lighter beige) DasFilament braun (brown) 3DJake pastel Rosa (rose) 3DJake pink (pink) 3DJake weiß (white)…
The color scheme is the following and the PLA i used in this print: 0.00-0.40: White (DasFilament Tonweiß) 0.40-0.80: Red (Fillamentum Ruby Red) 0.80-1.20: Grey (Prusament Galaxy Silver) 1.20-1.60: Blue (DasFilament Toms Infinity Blue)…
Another Picture for the kids, this time a unicorn. I took this SVG from pixabay https://pixabay.com/images/id-5296443/ Went ahead and cleaned it up in fusion360, extruded the layers and thats the STL. In PrusaSlicer i scaled the X and Y…
And the next one in the series of paw patrol multicolor prints….. RUBBLE. With a layerheight of 0,2mm and a 0.4mm nozzle, these are the colorchanges I did (All PLA): 0.00-0.40: Das Filament Tonweiß (white) 0.40-0.80: Das Filament…
Good for an emergency fund, cash reserve, those high value coupon cards and other this which should not lay around openly. Screwholes for 3mm woodscrews. Dont screw in to tight as it might jam the drawer. It has lips to prevent the notes…
I scanned a dogtoy and printed it. It came out really nice. Then i painted the eyes, the ears and the nose with acrylic paint markers from Molotow. The Filament used in the picture is all Pastell PLA from 3D Jake (pink, blue and green)…
I used the design found on coloringpages.eu, turned it into a 3D Modell. Use the following colors: (0,2mm layers, 2 Layers per color) 0.00-0.40mm: White (DasFilament Tonweiß) 0.40-0.80mm: Skin (Filamentwerk Elfenbein) 0.80-1.20mm: Red…
Resized the model from Tony to 75% to fit the mini bed. Added 3 and 1 seperators in pursaslicer to produce 4 and 2 compartments I added the holder and the original box resized in 75% to fit with the rest and on the mini bed. I used PLA…
I extended the moneybox not just to hold money, but hold pens and other sorts of useful stuff. Yes, its not a pen bucket, but it does the job and dont we all have already enough stuff on the desk? It is printable on the mini, but you have…
This is Everest from Paw Patrol. Printed at 0,2mm Layers the row of colours are: 2x DasFilament Tonweiß (Cremewhite) OWL Blaulila (violette) Fillamentum Peppered Mustard (yellow) Fillamentum Vertigo Jade (green) 3DJake Pastell grün (mint)…
This model is a remix of my money stash. It is now fitting 100€ Bills and can be printed without support. The stash can be mounted with M3 countersunk screws under a table or in cupboards or so. To put something in it, pull the drawer…
It fits a M10 screwhead very snugly, so no glue needed. I printed it with 10bottom layers for stability and 50% infill. Der M10 Schraubenkopf passt genau rein und muss daher nicht geklebt werden. Ich hab 10 Bodenschichten gedruckt und 50%…
The picture is from here . It is a png, so i had to trace all the lines in fusion360, extruded it in multiple heights and there's your STL. The Colors are set the following with a 0,4mm nozzle at 0,2mm layerheight, 2 layers per color, the…
How to build your own confetti cannon: Print this model, standing up on the smaller side, should not need supports. If you need a brim, try an inner brim only. We want to avoid sharp edges where the ballon will go. I added a small lip, so…
Fits these cheap deburr tools from ebay. It has a lip, so it won't fall through. The Deburr Tool is about 19mm in diameter in the front, and the handle itself is about 22mm in diameter. Simple print. Printed in das filament blue pearl.…
The layers are as follows for 0.15mm layers height: 1+2: orange (could be anything really) 3+4: red 5+6: orange 7+8: white 9+10: black With two layers per color the colors are more solid i think.
This box fits giftcards and can be closed and opened nicely with the wheel on the lid. It is a remix of james the printers christmas box and the grip is based on the sprocked by anton. To make a custom wheel, just use the “hub” and insert…
I really like using my underdesk calendar storage. But, recently i started using an additional notebook as well. So i added another level to the storage. It fits two books, the thick Leuchtturm1917 A5 Daily Calendar on top and a thinner…
I always wanted to have a classic penholder. Like on the big desks of big bosses in the movies. This is the closest i got in my design. It holds my Lamy Ballpoint Pen. It has a ridge in it, so the tip is not compressed, but the pen is…
Einfacher Meterstabhalter für den klassischen 2m Meterstab. Gedruckt in Das Filament PLA Blue Pearl, 0,4mm Nozzle und 0,2mm Layerheight. Braucht ca. 1:50h
There are a lot of underdesk book holder out there, but this is mine for use with my Leuchtturm1917 daily planner with a pen loop attached. I also tried to reduce the material usage and retain printability. Printed with 0,8mm nozzle on…
I wanted a phone holder which hangs over the monitor, as close to the eyes of the person on the screen. For making the eye contact more engaging and human. DIY Perks made a video on this, but that solution is way to much for me. Also my…
When i painted my Santa , i thought sealable pots for the acrylic would be nice. So i quickly designed them, printed them in DasFilament TPU and quickly realized… bad idea. The first prints where full of holes. The TPU was too moist. I…
With this plate, you can add a notch to any picture, board, plate, etc. and have a posibility to hang it onto a nail/hook. The alignment tool (seen next to the plate in the full image) can be used when glueing the plate on a rectangular…
I am searching for wall hooks for our kids, which are a bit “for kids". So i remixed in prusaslicer. I took the Rhino from Rob3D, cut the head off, added a modifier to make a whole in the back and placed the 25mm hanger insert from Lucian…
This is for the small version of the Catan Junior. There is a bigger, more boardgame like, version. The organizer features 4 pots for the material pieces, one for the dice, the other game pieces and a large pot for the larger gamepieces.…
To add heat inserts to your print, the print needs to have holes where these fit in. Either you add them in CAD or you could add them in the slicer. For the first step, Stefan from CNCKitchen offers STL and STEP Files on his website. Tips…
I wanted a piggy bank for my nephew to save up for a motorcycle, but he should be able to get to the money “without breaking the bank”. So i added a hole in the bottom and made a stopper for it in TPU. The original Design by ravinDIODE…
In this remix of the Happy Ghosty the Ghost by the original from Nejc Sever i cut of the back to make it more flush and added a slot for a round magnet with a diameter of 10mm and 1,9mm thickness. Add a pause when slicing and add the…
Print it standing up, supporless. mount with stickytape at an angle. The thermometer should be laid in a bit.
It holds 26 stamps, which was the amount they got from the HEMA package. They are round, fit snug and the lid closes quite well. It is a long print, all in all 10h of print time in 0.25mm Layers with a 0.4mm nozzle in PLA on the Prusa…
When thinnig pasta doe with a pasta machine, you should hang it to not stick together. For this is made this parametric design in fusion 360. You can push bamboo chopsticks in it and then fit to kitchen cupboards. The idea was heavily…
This print enables you to put nice labels on closets, fridges, doors, drawers, boxes, whatever. The label is protected by a glass plate, so it looks a bit more shiny. And when it is touched, the paper does not crumble. It can print…
I looked through pixabay and found this picture. https://pixabay.com/images/id-3340185/ So i converted it to SVG using https://convertio.co/de/png-svg/ But that result is not without its flaws. So i corrected them line by line and so on…
There are multiple versions with and without nozzle sizes at the front. Should fit M6. Maybe use finer layer heights for the screw pitch on top of the benchy.
This box is designed to hold around 10 yorkshire teabags. Safetly and a bit protected. Printed in PETG, the Lid has the Yorkshire Tea Logo on it. I also added a version without a logo. Also there is a fusion360 file with parameters to set…
Using PVB and this model you could create a small greenhouse for your rectangular flower boxes. Print a front and back cover and as much body parts as you need. Cutting the body to size can be done in the (prusa)slicer. When scaling the…
I found this image, and liked it so much, i made it my avatar. And of course, then i have to make a print out of it as well. The image is from here As it is an jpeg, i converted it in an online converter to SVG, put it in fusion360, and…
Santa is giving the go ahead! I made this sketch years ago on a piece of paper, giving the go ahead on the christmas sweets. It was liked so much and is still attached to the kitchen wall, that I decided to turn it into a 3d model. The…
I already had SVALNÄS shelves and wanted some more. But Ikea decided to discontinue them. So i only got the shelves, not the mounting pole. I created these wallmounts in fusion360, printed them in DAS FILAMENT “Tonweiß”, sanded them a…
It fits the BBQ and prints in 12min on my prusa mini+. Used filament 3D Jake Glitter Grey PLA with 0,4mm nozzle and 0,2 mm layers.
Wir nutzen den Spender für die normalen Packungen schon länger, aber wir brauchen auch einen für die kleinen Kinderpackungen / Mini Versionen der Taschentücher. Es passen sowohl die von dm / Saubär rein als auch die Tempo Minis. Es…
Print it standing up. No support needed. Attach with double sided tape. Has a ledge for the thicker part of the pump. The pump is used for vacuumsealing filament. Mine is labeld by 3djake,but i am sure, there are other ones which will fit.
This modell is to make paw prints on the pavement, so the kids can follow the trail and find the treasure. The model has a holder and a wall to prevent overspray on the side. Also a risen conture to prevent bleeding on the pavement. Also…
Quick print with or without a hole for mounting. Printed in PLA, 0,2mm Layers, Order of Layers: 3 Layers white/beige/"fur" 1 Layer rose/skin 2 Layer black/Outlines Original Artwort taken from keenyam at…
This was inspired by vals door reminder, but built up totally new, as i almost forgot my packs that morning. Version with parameters to set you own text might come some day. Printed in PETG (das Filament Neon Orange) and PLA (das Filament…
Die 750ml Flasche von TrueFruits Smoothies haben eine für mich ziemlich gute Größe um hydriert zu bleiben. Gerade am Schreibtisch. Und da noch ein Griff dran, dann ist es richtig gut. Da die Flasche wahrscheinlich nur in Deutschland…
Print the “Stuetze” two times, glue it to the holder in the position you prefer, i put mine very low, there is a “seam” where it fits good. I printed with a seam to hold the holder upright. Used Das Filament Blue Pearl PLA and 3DJake…
When you play with less than 4 players, the missing players are still “occupying” their spot. I printed the Yaga Hut from MZ4250 as 3d Gamepieces, but also wanted a ruin for the missing players. So i modified it in Meshmixer as good as i…
I uploaded a couple of versions. The Single.3mf is “the original” where i have a lot of bodies, assign them to a colour (you either need 4 extruders, or set up your single extruder to be 4) and then print it. Yes there are a lot of…
Wir brauchten einen Gutschein, der Vorschlag war ihn wie einen Chip auf dem Rummel aussehen zu lassen. Das ist das Ergebnis. Der Name ist in PrusaSlicer als Text eingefügt.
In machen Läufen gibt es keine Medaille, da diese aber oft auch besondere Erfolge sind, möchte ich sie auch in meiner Sammlung haben. Daher mach ich mir die selber. Bisher hab ich die folgenden Medaillen erstellt: 48. Nikolauslauf…
My Razor has a bit other geometry than the Edwin Jagger Razor used by pumikachu. The original was increased to 115% and a hole for the handle was added. Just import the geometry, that should work… Printed in 3DJake PETG neon orange. Not…
This is for this handcream alverde NATURKOSMETIK Feste Handpflege mit Sanddorn-Duft, 25 g dauerhaft günstig online kaufen | dm.de as it get quites oily fast in the paper box. Put in a M2x20 through the back and tighten it not too hard,…
We have a stroller from "safety first", a very common stroller. Which for me and even for her is a bit to low/short. Pushing it, always is uncomfortable. So at last i designed this… an extension. It fits barely on the prusa mini+. I…
I edited the holder bracket for the original model to be able to use cable ties to attach it to my balcony. Remix done in Prusaslicer, as PS does not really save all the modifications as STL, i had to include the 3mf. For the holder…
Print this in vasemode with a 0,8mm nozzle and you have a nice snug fitting safety cone for your edc flashlight. I have this for my nitecore MT1A and a boeker plus flashlight i have for years, no idea what modell this is. Both are “EDC”…
Sollte in PETG gedruckt werden.
Beim Schulranzen Lässig Boxy meines Sohnes ist der Knopf des Kordelhalter gebrochen. Also habe ich einen neuen gemacht. Der erste hielt ca. ein halbes Jahr, daraufhin habe ich die v2 gemacht und mehr Material für mehr Stabilität…
I like the bottles of truefruits drinks, so i use them quite often. In this case i water my plants via the string method while i am gone. I did not want to punch a hole in the cap, as I would like to use it for something else sometimes.…
I like the TrueFruits Birdfeeder , but also the pigeons like it. So i wanted to make a hut for it to keep the pigeons away to make place for smaller birds. The hut clips into the existing model and has a 22mm hole, which should fit the…
I use the empty pumpsprays from the Balea Men deodorant for isopropanol. This is a holder for it. It is attached to the Desk using Tesa Powerstrips. Printed with no support, in DasFilament Blue Pearl PLA with 0,4mm CHT Nozzle and 0,2mm…
The flexible grip was hard to push through the elastic band is store it in. Storing it now is much nicer. Still feels good to write. There are 3 variants. One is flat, one is ripped for your pleasure and one is grooved. Just print as is,…
In this build I re-used blueberry packaging for the planter. The plastic buckets which are used in germany (maybe even whole europe or the world?) have holes in the bottom to let water out. Which is what most plants like. Instead of…
Our recycling bag holder was a bit hard to push back under the counter. So i added some 608 bearings to the feet. These are 16mm in diameter and are at about an 22° angle. Just print standing and put one or two bearings on it. I used two,…
We have a chalkboard, i bought chalkpens, this is a holder for it. There are 6 holes for pens, with a diameter of about 14mm thickness. The depth is 55mm. The used pens are “ folia Tafelkreidestifte Basic 370609 6er Etui” There are two…
Simple thing, not really anything to say… screw in with a 3mm screw. Clip the receiver in, have nothing on the table. I have the Plantronics Blackwire C720
Ich weiß nicht wie ich es auf englisch beschreiben soll…. sorry. Am Tretroller “New Sports” gibt es einen Hebel, der fixiert den Lenker. Wenn man am Lenker zieht, kann man den Lenker umklappen. Damit das nicht beim fahren passiert gibt es…
Dies ist ein Organizer für das Kosmos Spiel des kleinen Siebenschläfers. Gedruckt in 3DJake pastell Blue PLA und 0.4mm Nozzle mit 0.25mm Layers. Ungefähr 6h.
The Tokens in the Incredibles 2 Junior Monopoly Game are just mixed when stored in the box, so i made this holder. Printed in 3D Jake White PETG, but should also be printable in PLA.
This 5 min Design and 8 min print saves a lot of tears. Mit dem 5 min Design und 8 min Druck kann man sich viele Tränen ersparen. Die Flügel der Goki Watschelente verklemmten sich immer in der Rollen. Durch die Abstandhalter sorgen dafür,…
To wszystkie aktualnie dostępne wyniki.
