Liczymy pasujące modele…
Instructions Bunny is designed from scratch with Openscad. I designed the single body parts, optimized them one by one and then put everything together with variable size and orientation... Body and head are created by joined spheres…
This fully parametric T-tube joint allows to connect 3 air tubes. The 90° side tube can have a smaller diameter than the 2 main inline tubes. All tube diameters, wall thickness and tube length can be easily adapted via OpenScad…
This little bunny collects coins and small paper money (depending on scale). Main dimensions and orientation of head and ears can be adjusted as with the original, plus the added coin slot dimensions at the back. Scaling it up by ca. 255%…
Customizable Hex Wrench in OpenSCAD, including additional params Small hex wrench with 2 diameters at the end of a handle. Parametric version, done completetly with Openscad. Originally designed for 7mm and 12mm hex diameter to handle the…
This adapter allows to install a venting tube to a small slot opening in a window frame or door frame. The CAD file is a full parametric OpenScad model, this allows to set many parameters with the OpenScad Customizer such as tube…
Simple Toy Car, designed as moneybox to collect some coins for your first car. Wheels can rotate, are simply snapped into the chassis body. Wheel tires and caps can be printed in 2 different colors and simply snapped together. Many…
Canopy Holder latch, compatible to MPX (Multiplex) R/C plane models e.g. Easyglider, Easystar, Cularis... (current version with hole / clip snap concept) Inspired by thingiverse object #806001 "mpx_kabinenhaubenhalterung.stl", but I…
Version 2 of my FNQ220 (Foldable Nano Quadrocopter) After 3 years of field testing and several own builds with different configurations, this is the V2 (file version V.39) with a lot of features, bugfixes and improvements compared to the…
Different bunny / rabbit figures, hidden under a cloak blanket. The cloak is generated over any existing 3D object by special OpenScad procedure. This scans the target object, stepwise spiralling up (Z slice by slice), using the…
Just a 2D flat star with 1 up to 5 stacking levels and optional comet tail Tail adapts automatically. Some other parameters can be selected, like thickness. It's a quick and dirty OpenScad hack to get some nice stars printed for the…
After the wheels of my shockflyer broke I needed a better replacement. This is the fully customizable replacement part, designed to be light and strong. It can be adapted to many setups (diameter of wheel and axis, height of hub and…
This spinner is customizable as OpenSCAD object so it can be adapted to many different R/C models in size, shape and features. Many parameters are customizable, you can modify diameter and height as well as the positions of size of fixing…
If you own a DJI Mavic Mini (1), you might notice a wobbling of the front arms in cold conditions or with strong winds, which can even cause the props to hit the body and crash. This is caused by the low torsion strength of the original…
Many DIY microcontroller projects require to program / flash the uC (e.g. with a bootloader) before it is useable in the circuit. Smaller PCB often don't give the chance to access the uC chip at its ISP pins for flashing easily, so the…
Holding frame for the Mobius action cam (nearly all dimensions are parametric). Different mouting concepts can be selected (screws, servo horn, none/glueing, Eachine racer 250 mount pad). Design is based on my Keycam 808 holder #768611,…
Duct housing for the brushless HAPPYMODEL 0802 motor of the MOBULA7 quadcopter, to be fitted as retractable fan unit on top of a R/C airplane. It acts as a self-retracting fan drive to power e.g. a flying wing model of up to 120g…
Light weight holder for HD Keychain Video camera #808 V16, including different fixing concepts (M3 screws or R/C servo horn). M3 fixing socket is provided to be glued into R/C model foam surface. Servo horn fixing allows 1 axis rotation…
Holding frame for Neopixel 8-LED Stripe with 2 different mounting systems to choose (on-top or below plate mount). I use this in different version on my quadcopters with a standard Neopixel stripe (e.g. available from Adafruit). Neopixel…
For my 3D DIY cartesic printer I wanted to use an simple direct drive extruder concept like the Replicator 2X, but with bowden tube, a 4 hole motor mount and a side flange. This one is completely re-modelled in Openscad from scratch, but…
Antenna Boom Holder for the Eachine 250 FPV Quad. Designed to fix 2 2.4GHz antennas (e.g. Jeti Duplex RSAT) at the tail of the quadcopter., using 2 pieces of bowden tube as guiding for the antenna ends. Drill the 2 fixing holes to 2.4mm…
Antenna socket for the Multiplex mc2020 / mc2010 R/C transmitter, to replace the original "telescopic" antenna socket. Just snap into the transmitter housing instead of the original one. A standard 2.4GHz antenna sockets fit well into…
Small GPS-Mount to fit on top of a FC with standard 30.5 x 30.5mm footprint (CC3D, Naze32, Flip32). An additional "2nd level plate" can be glued in to place GPS or other components in between the FC and the top cover. Many dimensional…
A small gimbal to fix a Canon IXUS 80 digital camera at a quadcopter. The gimbal is damped with special rubber elements as they can be found in old hard drives (or printed by yourself e.g. with TPU filament). Movement of the cam is done…
Cover for Flight Controller of Multicopter, e.g, X525 with Crius Board. Uses the same M3 screws which hold the FC in place. Pyramid shape is designed with thin walls to print without support structure. Instructions You can adapt size,…
The gimbals of the old Multiplex Profi mc transmitter series are a good basis of a DIY or retrofit transmitter project. Unfortunately they use 5kOhm sliding potentiometer as trim inputs which no modern transmitter mainboard (e.g. Turnigy…
I printed 4 of these and use 2 rubber bands (made of bicycle tube) to fix a 1000mAh Lipo to my Diatone 250 Quad, but all dimensions are parametric (OpenSCAD). Works great and fixes lipo very well. Prints well in PLA w/o support. Use…
Some EDF Model Jets suffer from too small Fan Inlet Crossection which reduces the zero-speed thrust significantly (such as the Tomahawk Viper Jet 70mm). A well known countermeasure to increase the thrust are further air vents, drilled…
To wszystkie aktualnie dostępne wyniki.
