Liczymy pasujące modele…
UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
NOTE: This is a part to be used with other Skadis mounting projects and doesn't do much on its own. This is a simple hook for mounting things to Skadis pegboards. These hooks use M2.5 screws, which can screw into M2.5 heat-set inserts.…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadis holder for 20.5mm diameter (or smaller) flux syringes (x3), 16.5mm diameter (or smaller) flux pens (x4) with extra slots/spaces for storing various other soldering tools. Most desoldering pumps fit into the syringe spaces just fine…
Wydruk około 22,67 €–27,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadis holder for common calipers, remixed from Printuin's caliper holder in his excellent Skadis Mount Collection to use heat-set inserts for mounting instead of integrated pegs. This model requires M2.5 heat-set inserts, M2.5 screws,…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadis holder for standard sized (220mm x 120mm x 75mm) glove dispenser boxes. Slightly overengineered to aid in easy, reliable, and rapid repositioning to fit different workspace needs. This model requires M2.5 heat-set inserts, M2.5…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fresh, friction-reduced feet for your fancy Fractal Define 7 XL frame. Cooked these up after realizng that my new case and my carpeted floor didn't get along very well. With these feet bolted on the case stands a bit taller and slides…
Wydruk około 16,08 €–19,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Skadis holder for solder and desoldering wick spools with 18mm+ internal diameter. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple battery holder for storage of twenty (20) CR2032 coin cell batteries, commonly used as PC BIOS/RTC batteries, Apple AirTags, remote controls, and other electronics. Also can hold thinner CR2016 batteries in a pinch, which is why I…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Love Adafruit's Raspberry Pi HQ Camera Case ? Love the beautiful Pimoroni Hyperpixel 4.0 display? Now they can play together! This page contains the two models required to make the Hyperpixel 4.0 work with the Adafruit-designed case - a…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadis holder for two Pinecils and a Hakko 899 tip cleaner, with a bonus tiny platform that can hold a Miniware MHP30 mini hotplate. Nice companion for mounting below the Skadis Pinecil tip holder: https://www.printables.com/model/287843…
Wydruk około 10,02 €–12,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Skadis holder for eight Pinecil or TS100 type soldering iron tips with bonus top pocket and tiny right-side oval slot for a bit of additional storage. Nice companion for mounting above the Skadis Pinecil holder/soldering station:…
Wydruk około 9,09 €–11,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Skadis holder for common 61.5mm diameter solvent squeeze bottles. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5 heat-set inserts CNC…
Wydruk około 6,33 €–7,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple case for the Arducam UC-733 board. The Fusion 360 source file is included to make remixes easier. Hardware Required This was designed around some basic hardware from McMaster Carr but their mesaurements are pretty standard and…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Skadis holder for six small hookup wire spools, like the ones included in Adafruit's basic Hook-up Wire Spool Set . This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks for mounting and an additional 4x M2.5…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Skadis holder for common 60mm diameter solvent pump bottles. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5 heat-set inserts CNC…
Wydruk około 4,98 €–6,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A slightly maximalist remix of the awesomely simple Raspberry Pi stand by Adafruit, for those situations where you just need ALL THE THINGS. Or, like, more of them anyway. Original:…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Plano 3500-series tackleboxes make for pretty solid parts storage. They're solidly injection-molded with clips that are a huge upgrade from those cheap “kit boxes” that come with the typical maker “assortment" packs. There are plenty…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple battery holder for storage of twenty (20) CR1220 coin cell batteries, commonly used in keychain flashlights, digital camera RTCs, and other small electronics. One of a series of battery holders I've created and shared here on…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple benchtop stand and stacking brackets for using an EKWB EK-Quantum Surface X-series radiator on a benchtop. Desgined for and tested with the X360 but should work with the X480 as well. This model could easily be adapted to work with…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Skadis holder for small-sized Kimwipes boxes, which are typically 120mm x 120mm x 75mm in size. Designed around the dimensions of Kimwipes part number 34155 . Slightly overengineered to aid in easy, reliable, and rapid repositioning to…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple RCA jack and grounding screw modification for the entry-level Pro-Ject Deubut III record player that originally shipped with a hard-wired RCA/ground cable. My record player's original integrated RCA cable was getting a bit ragged…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple vertical stand for holding an EKWB EK-Quantum Kinetic TBE D5 upright while using it on a workbench or table. It should work with any D5-based EK-Quantum Kinetic pump/reservoir without any issues. Also created a radiator…
Wydruk około 6,76 €–8,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Pixy's maker, Snapchat, may have quickly abandoned the drone market but that doesn't mean we have to abandon our little drone buddies! The Pixy's surprisingly well built but for long trips or throwing into a bag full of other gear its…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a simple proetctive case for Adafruit's PN532 Breakout v1.6 . Includes slots in the base for easy storage of 25mm round NFC tags and 54mm wide NFC cards between RFID hack sessions.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple replacement part for the blade guards on the Snapchat Pixy drone . Printing Suggestions My tests and final prints were done with a stock Prusa MINI+ in Prusament PETG with the stock 0.4mm nozzle. Better results came from lowering…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To wszystkie aktualnie dostępne wyniki.
