Liczymy pasujące modele…
A trigger hold to keep a Dyson V10 permanently switched on. For the mount, M3x6 machine screws were used to attach the mount to the Dyson Wall Mount.
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
This model is a case to turn the WZ3605E Buck Boost Module into a very usable bench power supply. It can also be made portable by powering it from a USB-C battery pack. The module I used is this one:…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
This model is for affixing a bottle cap bin to the top of the door handle on a Klarstein 201L Beer Fridge . Holes for the bottle opener were drilled and tapped, and the opener installed seperately. This model is only for the cap bin. The…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
A cable spool to coil up and organise extra cables on the back of your printer. Mount to the printer with DIN965 M3 x 10mm countersunk screws, which fit perfectly into the unused factory drilled holes on the printer's frame. If you're…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
This model is a steam spout for the Russell Hobbs 27040-56 Rice Cooker , to redirect the flow of steam from the machine to the side, for better extraction. This part must be printed in PETG for temperature resistance. After printing and…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small bench-top case for a combination of a 48V LED power supply and a Riden RD6006 DC Power Supply. To complete this, you'll need: 1x Riden RD6006 DC Power Supply 1x 48V 100W LED Power Supply 1x C13 Socket (or any other with…
Wydruk około 11,23 €–13,73 € nettoWstępna wycena jednego wariantu
If your Waldwerk Coffee Grinder is like mine, after about 100 coffees, the nut at the top came loose! Hand tightening it doesn't work, as it comes loose again after a few uses 😢 This tool slides into the top of the coffee grinder to hold…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A radius gauge for finding the corner radius of items. Can measure radii from 0 to ~100mm. Also included is a quick-reference label that can be printed on a DymoLabel printer, and stuck on. Rename the label file to “.label”, as…
ryobi_shaft_protector.stl A protective cover to attach to the battery, protecting the contacts from short circuit. ryobi_shaft_with_contacts.stl A shaft attachment to hold 8mm contacts onto the battery for use in other projects. The…
A rear lens cover for Canon Lenses. If printing on an FDM printer, the Canon logo should be on top. You may want some support material to support the rear side of the internal flat surface. 0.15 mm layer height is ideal. No support…
A Jig-Saw blade holder, holds 15 jig-saw blades.
Leifheit make great cleaning products, but in an effort to make more money on selling handles, the connector head of their dusters (push-in with clip) is different to the connector of the mop (screw-in). This model will allow you to use…
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
This print is a 2-piece Ukraine shaped flag, that should be printed in blue and yellow, and afterwards glued together. Using 2-sided tape, you can attach a magnet, and turn it into a fridge magnet.
This print is a bracket for wall mounted storage of roller blades. Print two per skate, and mount them on the wall! As you push or pull the skates in and out, the plastic flexes and the skates can easily be pushed in and out. Pro-tip:…
Print each model, and the holder. You may need to file down the inside wall of the holder for the radius gauges to fit. It's designed to be a friction fit, so the gauges don't fall out constantly. The tolerances are tight! If you don't…
A storage case for the bosch set of spade bits. https://www.amazon.de/gp/product/B008HRESU6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
This storage container holds 7 stacks of 8 bearings, 56 in total of the 22mm bearings used in Roller-skates, roller-blades and Skateboards.
A neat outdoor housing solution for a FritzBox FRITZ!Powerline 1260E WLAN Repeater to extend Wi-Fi to the Garden or Roof Terrace. Print each piece, and assemble as seen in the photos. The All-Weather box used was purchased on Amazon here:…
An insert to hold an AirTag inside the left binding of the Union Elite Pro 2018 Snowboard Bindings, concealing it completely inside the binding. Tools are required to reveal and further remove the AirTag. No specific print accommodations…
A different organiser for the box the Analog Discovery 2 comes in, to make things tidier when you buy the BNC breakout board, and other accessories.
A remix to the original Dyson Vacuum Cleaner model to attach a 100mm air hose. This can be used to connect to any handheld tools that have a dust port, for mobile dust collection when a shop-vac is not available.
This is a base for use in Manfrotto tripods, specifically the MH494-BH, though I'm sure it'll fit others as well. The screw used is a 1/4-20 with a 5mm shank and 1/4 inch of threads. The hole is threaded in the model, so you should only…
This is a flexible racking system for the Lockweiler 18x15cm small parts boxes. It can be built to any height, with any number of columns. It's designed to specifically store their Single Compartment , 7-compartment and 8-compartment…
This model has a choice of two faces for a meat tenderiser attachment for the largest hammer (1kg) in the Amazon Basics Hammer set . The hammer attachment should be printed with the 8 locator fiducials face-down, with support material to…
Print 1 of “remington_base”, “remington_outer_fin_L”, and “remington_outer_fin_R”. Print 5 of the “remington_inside_fin”. It is highly recommended you also print the 3 gluing fixtures to hold the fins in alignment while the glue dries. I…
Have you ever wanted a stylish solution for sorting your trash, but didn't want to compromise by buying those tiny all-in-one bins, or leaving a yellow sack on the ground for your recyclables!? …Yeah, me neither!!!! With this model, you…
This is a storage solution for the Decathlon: "Pilatesmatte Komfort L schwarz 190 cm × 70 cm × 20 mm". The hooks hang from the top of the door, and keep the mat tidily off the floor. You must cut 2 holes in the mat, and install the…
A glue storage/organiser solution for the UHU range of cyanoacrylate glues. Glues featured: https://www.amazon.de/gp/product/B005FN8F7W/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1…
This print is a frame to attach a foam roller to a bed, or other furniture, to be used as a knee support for sit-ups. The wooden pole used is 35mm in diameter, 900mm length: https://www.bauhaus.info/rundstaebe/rundstab/p/20784986 The foam…
This model extends the shelves of the Klarstein frides by 5mm, exactly the same length of the ledge they normally sit on. That means, if the shelves start to slip off the ledges of the fridge, these extensions will fit perfectly, and keep…
This model is the Fusion 360 file to create your own divider boxes for the Yellow Lockweiler parts bins , available from Bauhaus. The model is fully configurable, you can select the number of rows and columns in the model parameters…
To wszystkie aktualnie dostępne wyniki.
