Liczymy pasujące modele…
The design was inspired by a picture I once saw on the internet but I could not find it again. So I recreated it from scratch. When doing so, I had my CNC in mind and wanted to create it from wood (see last picture). But after some minor…
Wydruk około 2,67 €–3,26 € nettoWstępna wycena jednego wariantu
As I do not really consider plastics to be sustainable and environmentally friendly, I often try to put more uses into one design. In this case I combined the following items/tools: sample swatch with a thickness-wedge from 0.2 - 1 mm…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was a commisioned design for my father who asked me, if I could print him some wind indicators he wanted to give away as presents. As I am not playing Mahjongg, I cannot further explain the use of this. The cube can be inserted into…
Wydruk około 1,75 €–2,13 € nettoWstępna wycena jednego wariantu
This was a quick replacement for the original hitching rail, which was broken and made from a material that could not be glued back together. I recommend printing it upright to get a nice round rail. I used PLA from Das Filament in…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Introduction I always wanted to have a flexible transporting system for my gear. Sometimes I take a lot of stuff, at other times only the essentials. Now it is time to present my concept: it is based on “Euroboxes” which are widely…
Introduction: This is yet another educational model of a rack and pinion gear. My daughter had to give a presentation about this type of gear at school and we did not find a model that met all of our criteria: big enough (also the teeth)…
A pair of brackets to mount a Netgear GS110TP POE-switch into a 10"-rack. As the switch is a little wider than the mountig rails in a 10-inch-rack, the switch is actually mounted behind the rails with a little gap to accomodate the cage…
This is a bracket to mount a network media converter to the rail in a network cabinet/rack. As it is just fixed on one side, it fits 19" and 10" racks equally well. There are two holes for the cable inlet on the back to allow the…
When I wanted to hang a picture, I noticed that the frame had no way to hang it. The frame was too flat to mount anything. The picture itself was very thin and laminated, so I could not screw anything… I came up with this glue-on picture…
Screw clamp to fix a cable to a Multiboard/Underware and to provide strain relief. I use this clamp to fix cables that are threaded trough a cable grommet in my desk so they are not pulled out of their clips or sockets. I recommend…
just another cable tie clip for Multiboard/Underware. It allows for (hook-and-loop) cable ties up to 12 mm wide. The final result does not look as tidy as other Underware components but is a quick print and the cable ties allow for a…
As I like to keep it simple, I came up with these small clips to complete the Underware under my desk. Printing with three perimeters should provide extra strength. I also uploaded the Fusion 360 file so you can play around with it. There…
Our car came with three of the six plugs missing, and one went missing over time. So I quickly designed these screw plugs (M8 thread) to cover the holes. The plugs can be screwed in and out with a coin. Do not tighten too much to not…
For my Eurobox/Gridfinity-Transportation-System , I use Euroboxes with hinged lids made by Auer Packaging. You can buy the assembled boxes with lids or save a few € by buying the box and the lid separately (or even buy B-grade boxes) and…
Intro These are some designs for improved usability and/or improved fun factor for the Bilresa scroll wheel remote. The idea is to stick them onto the scroll wheel by either using double sided tape - or if you prefer a more permanent…
As my Easter-themed napkin ring is quite popular, I would like to present another table decoration: a tea light/candle holder in the shape of a fish. Originally designed to be made out of wood on my CNC-router, I made a few minor changes…
Recently we got new tank caps on the water and fuel tanks of the boat. They are sometimes hard to open and people tended to use pliers on them, which is not recommended. This tool allows for easy opening of the caps. It is designed in a…
As I found most of the existing mounting options a bit overkill and could get away with rather small screws for mounting the multiboard under a desk, I came up with this little grommet that screws into the thread of the multiboard and…
This is my take on a housing for the Shelly PM mini Gen3 (and probably the other members of the “mini” series as well). I know there are other designs available, but I did not find one that fit all of my requirements. This housing…
These are different inserts for my Eurobox/Gridfinity-Transportation-System to accomodate either 4 AA or up to 8 AAA type batteries in the shallow 7.5-cm-boxes. (They are not held in place in the 12 cm high boxes.) The are each 1 x 1…
Simple stencil to cut out a fish symbol for a nice gift of money. Hold it down to a piece of paper and cut out the fish with an exacto knife or something similar. Then place the bank notes behind the paper to present a colourful fish.…
A quick designt to mount the Hub to a board. You need to print two identical brackets to securely mount the hub. The size of the hub here is 44.5 mm wide and 24 mm high. print on the side no supports needed no infill printed here in PETG…
I needed to fix an Aqara “Wireless Mini Switch” to the wall next to the existing light switch. As we do not need the outlet below the switch and this also was just a temporary solution, I decided to quickly make a mounting clip that would…
This is an insert for my Eurobox/Gridfinity-Transportation-System to accomodate the Panasonic FZ1000, some (micro-)-SD-cards and a spare battery. It is 3.5 x 3.5 Gridfinity-units in size. I cut out the corners from this square to make…
A quick designt to mount the charger to a board. You need to print two identical brackets to securely mount the device. The size of the charger here is 112.5 mm wide and 27.5 mm high. print on the side no supports needed no infill printed…
My daughter has a loft bed with a slatted frame. Underneath is a couch ant thus she asked for a way to fix her LED decoration below the bed. I quickly designed these hooks that clip around the sprung slats of the bed (slats 54,5 mm wide…
This is a replacement clip I made for our gas boiler. There are two of these clips holding the upper edge of the metal hood of the boiler. One was missing as long as I remember and as we had some noise coming from the hood of the boiler,…
This was just a quick fix to mount a HDMI splitter to a board. Dimensions of the splitter: 67.6 mm wide, 21.5 mm high. Prints on the side, with the “triangles” on the print bed. No support needed no infill used printed in PETG here
My daughter had to give a presentation to her class on the general construction of the RMS Titanic and hot-riveting of steel plates. For a better visualisation of this process we came up with a model that actually works (without heating…
These are different inserts for my Eurobox/Gridfinity-Transportation-System to accomodate either 2 handle bar mounts or 2 roll bar mounts in the shallow 7.5-cm-boxes. (They are not held in place in the 12 cm high boxes.) The inserts are…
This is a replacement pin for the Schleich fence 40186. My daughter lost one of hers and with a 3D-printer, it was easy to replace it. This is printed in PLA from Das Filament “tonweiß matt” and quite a good match, as you can see from the…
To wszystkie aktualnie dostępne wyniki.
