Liczymy pasujące modele…
I remixed a UniFi 6E AP mount to work on Ikea Skadis. I saw another mount for this AP on the site, but it was not horizontal, which is what the radiation patterns on UniFi APs are optimized for (they are generally meant to be mounted on a…
I was surprised there was no mount to add a DualSense Charger to the Skadis board so I remixed a wall mount to create one. There is an STL option with/without cable ties, and I made the dimensions for the Panduit BT1.5M-M 6.3" cable ties,…
This model is the same as the original with the cut out for USB/lanyard, but it has smaller hooks to make it easier to fit into the board after printing the previous model and having trouble like many other users.
I remixed a Ryobi battery charger pegboard mounting bracket to make it compatible with IKEA Skadis. I printed the bracket upside down with minimal layers of support at the base in PLA with an 0.4mm nozzle on the X1C the print took just…
I combined 3 models I liked to create a Skadis stand for the Nintendo Switch that can hold 24 games. It also has an option for a logo with debossed lettering that can be printed in another color. There is also a version of the debossed…
I created two versions of the original model; one uses less filament since part of the original isn't necessary, and the other increases the durability of the centerpiece by doubling the thickness by 1mm. It felt a bit too flimsy to me. I…
This bracket installs to the Skadis to fit a rod 1" or 26mm in diameter snuggly to filament can be rested atop. I used a dowel just like this https://a.co/d/6E9qGLj and was able to fit around 16 1kg spools along a 48" dowel with one…
Knipex Super Knips holder for an Ikea Skadis pegboard. I remixed Aaron's holder by removing holes for the Skadis Universal Hook and adding the pegs directly. I also removed some inessential elements to slim it down and save filament. I…
This is a mount with Skadis pegs for the Apple TV 4K (2022). I think it would be a easy remix with Skadis T-Nuts or T-Clips but I generally prefer the pegs. I printed at an angle with 0.4 nozzle at 0.20 layer height without any problems.
I wanted to mount my glue gun by the screws since that area is mostly dead space, and it's hard to mount stuff there anyway. I found that I needed a bracket that was slightly offset compared to the old one (about 0.5mm), and the holes…
Let's you mount the Bosch Professional GMS 120 on a Skadis board and keep the battery on the side for long term storage or keep a spare
The original model fits Flydigi controllers perfectly but the mount on the back is not compatible with 3rd party Skadis boards like the Keepo. I switched it to a quad formation which will fit most Skadis type boards
I was dissatisfied with how the other skadis hue mounts allowed for the light to shine through at full brightness so I remixed this model to reduce the brightness of the lights and still allow access to the center button. The model can be…
Allows you to mount 4 Wii Remotes and 4 Nunchucks on a Skadis board while saving more space than the individual modular version. I printed with 0.4mm nozzle at 0.2 layer height 15% infill with tree supports which went well.
I was surprised there wasn't a Wii U mount for Skadis already available but I found the best wall mount I could and adapted it for Skadis. You can also use this for third party boards like Keepo. I printed at layer height 0.2 with 0.4mm…
Print upright I used a 0.4mm nozzle and 0.2 layer height (you can probably increase the latter). Should work on any Skadis type board. Only fits 8K model as seen here:…
You will need an M3x16 screw minimum, and Skadis T-Nut M3 . Very simple install just add the Switchbot Wall mount adapter included in the box (needs to be unscrewed from the stand) and line it up with this mount, then you can use an M3x16…
Converts dual cord used on blinds into a single chain you can use most Smart Blind Drivers. It comes in two pieces, in the larger piece with a hole place the string of the cord through and tie a small slipknot. This video might be…
Very straight forward print 0.4mm nozzle 0.2 layer height with supports. Compatible with this Joycon Charger: https://www.amazon.com/PowerA-Nintendo-Switch-Joy-Charging-Dock/dp/B01MR6JD1M
I added two designs one for Skadis boards and one for third party Skadis like boards such as the Keepo. Pretty straightforward print with supports.
Uses Skadis pegs to mount these Cobra pliers with built in jaws. Should be printed in the orientation of the stl with normal supports.
Let's you vertically mount a Unifi USP-Strip-US on an Ikea Skadis board. I made a Peg and T-Nut version but I only tested out the Peg version. The T-Nut version is made for M2.5 screws. As always I left a Fusion file in case anyone wants…
I left the Fusion file for adjustments. This model may need some fine tuning for the position of the sensor bar. I put it where it currently is so the model could be printed without supports. Another adjustment you can make is getting rid…
To wszystkie aktualnie dostępne wyniki.
