Liczymy pasujące modele…
The original model is great, but I have B22 sockets so I had to adapt it. A few other changes : Cover may be fastened to the base plate with M2.5 and hex nuts Cover has an internal groove to fix the glass, so it may be used “pointing…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really like the Dummies-13 on runners, for gifts - but why only the masculine version ? So I remixed the plates to replace the “masculine” parts by “feminine” ones. It's called Duffy-13, the double F being the mirror of the double M for…
I do not like to use glue for anything I may need to repair, so I remixed the model. You will need 6 M3 x 12 mm screws and assorted nuts. 2026-03-23 : my handcuffs collection . 2025-05-08 edit : I've made a second version (V2) with an…
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
V4 NOTE : I've been struggling to make changing plates easier, without all the small pegs breaking. So I finally dropped the pegs for a slot on the base, and its counterpart on the plate. Added a (optional) small lock to fill up the slot…
If you're going with the STL file, supports should be added for the half-circle USB connector « emplacement ». Printed at 0.3 mm layer height. The 3MF and GCODE files already contain the needed supports and a color change at half-height…
2025-01-25 : I have uploaded a new version (MARK-2) of this design. Plates are compatible (because Gridfinity). If you mix MARK-1 and MARK-2 plates or lids, use Mark-2 side locks. Need a gridfinity-compatible toolbox ? This may be it.…
2024-03-30 update : after seeing a lot of the cars' linkages break, it was obvious the system was far too fragile especially for young kids. So I have made a V2 release of the car bodies (locomotive and car). It uses a simpler and…
Warning use only LED light bulbs ! Otherwise the model will melt (trust me, I did the test). The adjustable desk mount is a great model. Here is a remix to make it into a desk lamp. There is the head for an E14 socket, and lamp shade.…
2025-04-12 update : the ring (for the keyring version) was a little too thin and prono breaking. It is now larger and should hold better. 2025-01-01 update : I made a second version (V2 directory). Main difference is the legs, which are…
English version This is a remix of Printcuffs irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the medium model, with strands loop height around 6.5 cm . Check the large (…
Just added small locks to the tube and flanks. That way, no risk the spool will “open” all by itself, and still makes it easy to take apart if needed (for example when not needed). Supports mandatory (organic), but they are really easy to…
Need a gridfinity-compatible toolbox ? This may be it. With one or several stacked plates and a handle for easy moving, you can build your mobile storage system. You can even stack the boxes on your shelves to save on horizontal space.…
A quick remix of SHR3D.eu's Ukraine pendant. I wanted a two-sided pendant, so tinkered the original SCAD model so as to be able to print it at 50% thickness and glue two items back to back. Automatic color selection made by PrusaSlicer is…
English version This is a remix of Printcuffs irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the small model, with strands loop height around 5.5 cm . Check the large (…
English version This is a remix of Printcuff's irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the large model, with strands loop height around 7.5 cm. Check the medium (…
The ejector is (depending on the filament you used) bendy, meaning it can block itself instead of sliding smoothly upward. I added a leftmost “handle” and modified the platter to avoid this problem. Platter keeps the two (currently…
A fast print (20 minutes for only one item), two colours without MMU, and your keyring is ready to use.
WARNING this must be used with LED lightbulbs. It has been tested with regular/old fashioned lightbulbs, and will melt. You have been warned. Had to change two spotlights from our bathroom, so did this little contraption. It can be…
2025-11-28 update : added the FreeCad file, for anyone to make his/her own upcycling. The spreadsheet tells it all (in french, sorry). Only two items (cyan-colored) should be changed : the internal diameter and the cardboard thickness.…
There are four versions on this model : with inside king or queen, and single part (single color) or two parts (to have different colors for pawn and king/queen). The models will have to be scaled down (I print them at 40% scale), except…
This model is made of two parts : the head, which shoul be printed with TPU or Flex filament. 5% infill (Rosa3D TPU, shore 96A) should be enough. the handle, printed in PLA or PETG, 15-20% infill. Because of the small footprint, a brim…
Here is my take on the well-known subject of spice-management. Except it may also double as a pen-management rack, or something else-management rack. You can choose to build large or narrow, high or low - basically, anyway you want it.…
If you press-remove water from your sponges, they will dry faster (and will be less yucky). The hinge attachment is made with a 1.75 mm filament bit. WARNING : it is trongly advised to print the hinge zone, on the tray, with 100% infill.…
Fastening stuff on vertical surfaces is a good way to save space. So I remixed @marcusone model with two added M4 holes. You will need 2 M4x20 (or longer) screws. The head has not changed, I included it for ease of download.
It may be useful to place stuff “almost at the same place” on the plate. The rulers help in that respect. Color change on the fourth layer (grooves are 0.6 mm).
Some stuff I have to put on the plates must be hold by something. The holder will help lock them into place. You WILL need to print your own locking tool that will go into the holder, obviously, since your needs will probably be very…
The replacement part is not that expensive, but delivery costs add a heavy premium to it, so I designed my own bristles-included vacuum nozzle. Note : the final model (black nozzle photo and FreeCad image) is rounder than the intermediate…
Those paint rolls can be a pain to dry properly - but not anymore ! Just measure the outer diameter of the roll, the inside rod axis diameter (used axis diameter is 80% of given one), and run the OpenScad file. You may create as big a…
The only gripe I had with M4NU's orrery is that the hand crank is not locked whatsoever. So I modified it, and added a clip. It may be a little tricky to put the clip on, since it is on the inside of the main bowl, but once in place it…
Here is one more Halloween pumpkin fidget. I added a (long) tutorial to let you design your own. Please note that I use FreeCAD and the tutorial does too. I will try to explain as best as I can for you to design your own model with…
To wszystkie aktualnie dostępne wyniki.
