Liczymy pasujące modele…
UPDATE : I had issues printing the honeycomb when the two pieces were not aligned 100% the same. Caused an issue when I inserted the 1/8" rods (not being perpendicular) So, I added three 1/8" holes that would always print the same place,…
UPDATE: As with my original stand, I had issues printing this when the two pieces were not placed on the bed in the exactly the same orientation. (The honeycomb infill would ‘move around’ to get a best fit). In that case my support rods…
I needed to mount some custom built baseball bats in my office but I didn't have enough “top down” space. Since width wasn't a problem I designed these hangers that use the weight of the bat and leverage to keep everything in place. The…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hey all, I'm back again, this time with an almost vertical laptop stand. I needed a more vertical stand for my desk so I changed up my standard stand a bit. Takes up a bit less real estate and puts the monitor a few inches higher. I also…
I have a snowblower that's had a broken pull handle for years. Yeah, I'm TOTALLY on top of that. Cup finally filled to the brim so I sat down, designed this, printed it out (warmed up a bit) and then went back out and replaced the broken…
I purchased some cheap polishing wheels from my local “Wharf Carriage”. They came as advertised, 6" and for a ½" or ¾" arbor (two sets each of size specific plates). Not sure how you're supposed to match them up but just NO. The wheels…
UPDATE to the UPDATE : First change, I rotated the front ends to better hold a keyboard when you want it out of the way. Second change is that the connecting rod holes are now static (old model used one of the infill holes which could…
As I'm sure everyone who's ever used a keyboard knows, the feet will eventually break. Or maybe I'm just a angry typist! ;-) Whelp, another keyboard and another broken foot. Not my fault this time, it came that way. Tired of making do and…
This is a remix of ChiMuFeng's laptop stand for an r9000p laptop. I liked the design but I shortened the bottom rear and top fork, both were too long for me. I printed using 3 shells, no tops/bottoms and a 20% infill of hex. I not only…
I needed some chamber flags so I adopted an earlier lollipop design into this non-snag half moon design which also utilizes some recessed lettering that you can blacken out. I used both PLA and ABS, 50% infill and anywhere from .15% to…
Purchased a Delta table saw from my LHS and although the throat plate that comes standard works, it lets a LOT of dust and debris through. So, instead of plunking down big bucks for a replacement I simply made my own. And it worked!…
This is a sturdy chamber flag for .223/5.56 rifles. I've used mine for years and have never had any issues and my original prototype is still in rotation. The barrel end allows for greater visibility and grip. Easy in/out. My original…
This was my first attempt at a chamber flag. Worked very well and I've printed out many for both myself and friends. Never had an issue releasing the slide down onto the flag. Rounded “lollipop” design reduces snags. This version also has…
This is the second iteration of my .45 Chamber-Flag design. First was a lollipop that worked well but “sometimes” snagged on my pistol case so I came up with this rounded design and so far so good, zero snags. It also has the word SAFE on…
I use a 6 ring binder for my work notes and have recently upgraded to a nice soft leather version. The downside is that it's a soft cover and doesn't offer any writing support when it's not laying flat on a hard surface. To solve this I…
Remix of Cosmin Ivan's “Simple Helmet Horns”. I just made them a bit convex on the bottom to better fit my rounded helmet. If you have a flat surface to mount these on use the originals.
Yep, I needed a spot to hang my shower razor. Do I have a ledge I could use? Why yes, yes I do - but what fun would that be. Anyway, I knocked out this rough prototype, possible changes to come. I'll reprint in black to match the other…
I wanted to re-use some plastic soda bottles as seed starters but needed a base to keep them upright and stable. I ran through a few prototypes and ended up with this. Cut a bottle in half, screw it into the base, drop in a cotton ball…
Tired of propping up my iPad (and having it slide down) on different things when I wanted to watch something, I designed this folding iPad stand. I've used this stand with the thicker Gen1 Pro and the newer Gen3 Pro with zero problems,…
Ever put down your Maglite only to have it slowly start to roll away? Well, no more! This comes with two pieces, a front bezel mount and a rear mount. Using the rear mount would probably preclude easily sliding the light into a pocket or…
I came across a YouPipe video of a guy (James Archer) who made his own color correction chart, similar to a SpydrCheckr 24. I had thought of making one myself so it was kismet. I sourced the color samples from my LHS (for free!), cut them…
I wanted to build a concrete volume control knob for my computer. I had found some done with paper molds and although they seemed to work well I was looking to do something that was overly complex so I made my own 3D printed designs. I…
I needed to connect an ESP8266 to an DHT22 sensor for my Home Assistant weather station. I didn't want to hardwire the connections so I added some screw contacts. I knocked this out using TinkerCAD. The top requires some glue (I used a…
I've forever been having problems open up the super smooth Bluetooth headphone cases. It got to the point where I'd just stop using them. Then I printed out some finger grips. Problem solved, use them every day and I've never had an issue…
Where we live, power goes out a lot. “Like a-lot a-lot”. The real problem is when it comes back on - or tries to come back on, rapid fire bursts, voltage issues, etc.. After the last outage and the loss of some equipment I had a need and…
Would you pay $80 (each) for replacement heated seat warmer switches or coble up some replacement to use up parts you had laying around? Exactly, me too! And that's exactly what I did. I had some left over safety switches ( here ) so I…
I have an 85 F150 that still has years of life left in it. Unfortunately, its plastic parts do not and have started falling apart. 3D printing to the rescue! A few minutes in design, a bit more in printing and we're back! Originally…
To wszystkie aktualnie dostępne wyniki.
