Liczymy pasujące modele…
After taking heavy inspiration from other gravity knives desings, I decided to make my own fully printable version. With this design you don't need any extra hadware, you can just print all the parts, even all at the same time if you want…
Wydruk około 4,21 €–5,14 € nettoWstępna wycena jednego wariantu
The design concept is pretty simple and straight forward. It consists of the following piece types and quantities: x2 compression pieces. x2 base. For a complete set, you will need to print all 4 pieces , have a string or a ball chain…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
As the summary says, this is a simplified miniature of a blast furnace. I designed it for a city model in which I collaborated. More specifically, the model is based on the “Alto Horno Núm. 1” in Sestao, Bizkaia located in Spain at the…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
I needed a wide funnel to fill some jars with pet food. I had already designed a Wide funnel for this, but because it was circular, it kept rolling and falling to the floor. To solve this problem, I made the wide part rectangular. This…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
I needed a wider funnel to fill some jars with pet food (as you can see in the last picture), so I designed this one. It also has a ring for hanging it up. These are it's more relevant dimensions: Of course, to obtain other dimensions it…
Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu
I needed a stand for a painting, so I designed this stand that does not need supports for printing. These ar it's general dimensions: As can be seen in the following image, it holds any picture, frame or panel at about 100º from the…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
I didn't like the height of the table and needed a way to secure it, so I made a riser and hitch for the easel IKEA ODDVALD. This is the specific easen: The model rises the height a total of 28 mm. The exacts dimensions of the model and…
Wydruk około 4,09 €–4,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As it says in the summary, it is a very simple model of a train. I designed it for a model of a city I was collaborating on. It is at 1:1000 scale. These are its most relevant dimensions: Print settings Printed in PLA, without rafts or…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
When spray painting, it is always the case that if the piece is directly placed on the ground or table it can be poorly painted due to uneven coats, especially at the edges. With this design, you can raise the piece to reach all the edges…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
As mentioned in the summary, this is a modular hook design that lets you to customize your own assembly. This is achieved through two types of wall mounting options, in addition to spacers of different lengths either textured or smooth.…
Wydruk około 0,82 €–1,01 € nettoWstępna wycena jednego wariantu
EDIT (04/11/2022) : Added an annex to detail how I attached the plumbob into the headband and the small cylinder .STL file. The original design, was intended to use 6 x 3 mm cilindrical neodymium magnets to keep the two parts together.…
As the title says, this is a dog poop bag dispenser, intended for use with rolls of about 25 mm in diameter and 60 mm in length. It can hold approximately 11 rolls maximum. It must be said, that in this design, the assembly of the parts…
I needed a cute little way to display some earrings, so I came up with this. As the summary says, it's a 3-piece miniature rack with two models of hangers. The two pieces that make up the rack itself are the "rack core" and the "braket".…
EDIT (04/11/2022): Added a version with bigger earplug holes (see the dimensions in the annex). EDIT (17/12/2022): Added a version for cylindrical earplugs, with diameter of 13.5 and a length of 19.5mm. The 3M earplugs -…
As the title says, these are cat ears for the Logitech G432 headset. I don't know if they will fit other Logitech or other brand headsets. I specify the the critical dimensions of the model below: The model has a 10 x 2 mm hole for it to…
I needed some small shelves or bleachers to display my prints, so I designed these brackets to assemble an small two-level bleachers that fited in my shelf. Obviously, the 3D printed parts are the brackets. The shelves themselves are made…
Continuing my saga of add-ons for the Logitech G432 headset, I've designed these goofy demon horns. They are a pretty easy, simple and quick print. Based on reviews of the previous model (which you can check out here: Cat Ears for…
I was tired of sticking toothpicks in the seed that always felt out, so I designed this simple 4-part holder. It should work fine with the majority of glasses and jars. There are two types of legs avalible: The normal one , intended for…
Print Settings Printed in PLA, without supports or rafts, at 0.2mm resolution and 100% infill. It can be printed as it is. For more stiffness I recoment 3 wall line counts. I would recommend lowering the fan speed to increase layer…
As stated in the summary, it is a corner protector of simple design. There are two types: 3-sided corner protector , the most common variant, intended for most applications. 2-sided corner protector , with the same dimensions as the…
As the title says, this is a coaster design with a hollowed out hexagonal pattern and a dispenser to hold up to 5 of them together. The hexagonal pattern itself is not really my own original design, as I drew a lot of inspiration from…
This is my first attempt at 3D sculpting, so it's not remotely perfect. You can see my unsteady pulse, but I think it gives it some extra personality (at least I hope so 😅). It was done in Nomad Sculp for the Ipad, which is a great…
It have tested it with a normal 3x3 (as in the picture) and with a 4x4 and does its job without a problem. Print Settings It can be printed as it is. Printed in PLA, without supports or rafts, at 0.2mm resolution and 15% infill.…
As said in the description, this model is a lockable two-way sliding box. Before explaining the mechanism itself let's begin with the general dimensions of the finished assembly: The set it's composed by two pieces: The case that acts as…
EDIT (08/12/2022): Added an improved version of the base with blind hole to facilitate the gluing of the assembly. It holds wristwatches with a wrist circumference of about 22cm without a problem. If you have heavy wristwatches (mine are…
As previously stated, this is a model for a receipt punch base. For the whole assembly, you will need to print the base and pick a nail. The one that I used had a diameter of 3.4 mm through the "body" (this is the diameter of the small…
In a recent vacation I purchased a miniature sword replica in Toledo, Spain. As said in the description it was a replica of the “Tizona”. The sword came with the following description: TIZONA DEL CID This sword belonged to de castilian…
I had some toy trains lying around, but no tracks, so I designed some simple ones. It should be noted, that the dimensions of these tracks were designed to work with my specific trains, I don't think they are "universal" and will work…
As stated in the summary, it is a simple angle bracket for supporting shelves or other types of platforms. There are three variants depending on the fixing configuration to be used: Without holes: for sticking on both sides on flat…
As you can see in the photos, it is a simple container to hold thumbtacks directly on the cork board for easy access. These are its overall dimensions: Print settings Printed in PLA, without rafts or supports, at 0.2 mm resolution and…
I was tired of loosing it all over the backpack, so I desgined this magnetically secured case. It fits perfectly the Hommie i706 stylus for Ipad even with its rubber plug for the USB-C. Since the original design was made to acommodate 5…
Description As stated in the summary, this is a fixed wrench oganizer with 8 places. The design considers two types of manufacturing methods, each with it's own two variations: 3D printed: In 1 piece. Just print the part in one piece…
As can be seen in the images, the design consists of two models: A central part, which tries to imitate the pistil of the flower. The ring, with a pointed part for mounting. The whole geometry of the model is inspired by a napkin ring I…
As stated in the description, this design is a replica of a miniature ship that appeared in the League of Legends Arcane series in S2 E9. These are its overall dimensions: As can be seen in the last two screenshots, this model is my best…
I had this toothbrush holder with its broken cristal vase lying around, so I decided to print it a replacement one. There are two variants: Spiral vase with straight side : this is model meant to fit my toothbrush holder. In addition to…
To wszystkie aktualnie dostępne wyniki.
