Liczymy pasujące modele…
A set of wall mounted draws to hold various Dremel bits. I have also included a blank draw that can be loaded into Tinkercad so you can add storage for different bis that I don't have. I printed the frame with supports, and printed it at…
Just a simple 2032 battery holder, holds 10 batteries
This is a remix where I have shortened the length and added fitting guides to hold the two parts together. I have also made it in two parts that slide together to make it a bit more robust. Both parts printed in PETG at 0.2mm layer…
This is not really a remix as I made it from scratch but was inspired by the "Wago 221 Power-Rail" by hedwig . This is to fit the cheap Chinese Wago "knock off" versions available from Aliexpress. it is just a 3 way one only as that is…
I liked this Dalek but was disappointed that the spots were the same colour as the body, also the top “Grill” was the same colour when it should really be black inside. This upload only has the parts that are different from the original.…
I really liked the shape of this ladybug model so I increased the size so I can use it as a garden decoration and I split it by colour so no painting is required. I also added the eyes as seperate objects so they can be in white. Prints…
This is a cup holder to mount on the "Push" handles of a wheelchair. The two main parts simply fasten together with M4 screws. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: Generic PLA & TPU…
Small indicator to remind you what size nozzle you have fitted to your printer. I have mine mounted at the top of a 3030 extrusion so the “slider” cannot slide off the top. It is fastened with a M3 cap bolt. I also did a filament change…
I was building an air quality sensor and when I made a box for it I thought why not also make a box that can be used on other Arduino projects. This model is for the fore mentioned Air Quality Monitor but I have included a blank front for…
This is a dog-tag silencer to stop them jingling, needs to be printed in a flexible filament, something like TPU. I did it at 0.2mm with support.
While not exactly a remix I did “borrow” the head from https://www.printables.com/model/407163-ladybird-fridge-magnet I don't know how long PLA will last in the garden with the weather we get but they look good at the moment. No supports…
This is a simple frame I made based on 16mm tube (From a clothes prop) to hold the controllers from a Quest 2 in a 2 handed rifle formation. Rather than use magnets to hold the controllers on I opted to hold them in place when I use it,…
I remixed this as the original wasn't quite wide enough to fit my bed and glass. I also added a bit of roundness.
This is a simple screw together case for the BigTreeTech Pi4b adapter board. No supports required, printed in PLA. This is the same layout as the Raspberry PI 4 but without the hole for the audio socket. I originally designed it to use M3…
Thingiverse part:https://www.thingiverse.com/thing:3154398 I made a completely new bracket to fit my ratrig vcore 3 and also filled in some gaps in the original part. I then added a new servo in Klipper and added a macro to run the…
The original model did not fit my new Dremel so I used a scanned image of my drill in Tinkercad to remove the required amount of the original so it did fit.
This is a case for the commonly available high voltage generator “Toy”. I created this the first time I dropped the board and the coil broke away from the board. I figured it needed something to protect the coil while still making the top…
I have shrunk the original model down a bit (except I took a bit of a liberty with the thickness) and added a usb memory stick. If you are looking for the same memory stick, I have added a photo of the one I used. I have had to glue the…
These brackets are for mounting a fire tablet. Made for 3030 extrusion, not sure what they would mount like on 2020 extrusion
Here's my version for cnc collets,.After wasting filament making a box with the holes for the collets in it and getting the size wrong, I remade it with an insert to hold the collets. Also had a lot of difficulty getting the lid on and…
A 3d probe storage holder that fits in the current wired probe storage place so you don't need to remove the current plastic part that is really hard to remove without stripping the heads of the bolts. I don't need the current 3d probe so…
This is a small tool rack to hold Cutters, tweezers and scraper with room for a couple of other bits. Made for 3030 extrusion on my Ratrig V-Core 3 printer. There is also a wider version for printers with a 4mm side panel fitted.
This is a hand lamp I have made. The battery I have used is from an 18v Bosch Drill I have. The original connector was for a "Power4all" battery that Bosch obviously subscribe to. For the LED's I have used the LED replacements for car…
I made this bracket to fit a cheap hygrometer inside my Sunlu filadryer. I made the holes to fit the holes I had already made for the “Nozzle” I had fitted to the box (the nozzle was from thingiverse)
This is my version of the wire grippers you can get to hold two wire together while you solder them. Printed in PLA at 0.3 layer height. I blocked supports everywhere except for two small supports at the ends of the internal slots, these…
I made these panels for my 3d printer to make the side panels easier (and cheaper) to fit as they will just be square panels instead of needing machining. The top one with the extra hole in it is for mounting a btt filament sensor.
A small case for home made electronic instruments. There are two versions of the base, the ESP8266 has mounting for an ESP-12F and a cutout for the USB socket. The plain version has slots for mounting PCBs or strip board. There are also…
This is a cover I made for the adxl cable I have on my printer. You may need to turn on “Print thin walls” in your slicer. Prints without supports or brim.
This is a simple holder for the brush and oil bottle that come with the Panasonic trimmer that I have. Without being with the appliance I am always loosing the bits and pieces that come with them. Printed in PLA Placed upside-down on the…
Simple rotation indicator with ball bearing to show rotation. Printed in PLA at 0.1mm layer and tree supports.
This is a retainer band to stop individual day tablet containers from falling out of the seven day holder. It's always a pain when the days all fall out and you have to check them to make sure they go back in right. Printed in TPU, no…
This is a lens cap for a Sony 400 G SSM II Lens. Printed at 0.2mm in PLA with a layer change to TPU at Layer 5. This fits on the outside so unfortunately prevents the use of the sun shield (Not generally a problem in the UK :) )
As I have replaced the original xy probe on my carvera Air with a 3D probe and still liked to use the Margin function, I added two line lasers to the spindle cover. Where they cross is where the Bit will cut. I wired them in parallel to…
This is a simple idea for a rotation indicator where the body of the windmill stays still and the blades rotate. Printed at 0.1mm layer with tree supports with a blocker in the middle to prevent support being put inside the body to hold…
I have just bought a de-soldering tool and like a lot of things now, it comes with little spares like nozzles, filters and cleaning rods. These usually get put somewhere for safe keeping and I never remember where I put them so I thought…
I have remixed this to make it a bit easier to produce and use. I have increased the “rim” around the box and the matching slit in the lid to make it fit better. I have also added a lip to make the box easier to open. I have also moved…
To wszystkie aktualnie dostępne wyniki.
