Liczymy pasujące modele…
This is a remix of the Clarke penny whistle. I had to make quite a few adjustments as I learned how to get it to sound right. It does sound good but is susceptible to being overblown like other types of this instrument. Align the sound…
I wanted to try a marker that is easy to remove but will stay in place .
This standoff i fits laser engraver honeycombs that are 6.5mm diameter for holes. This standoff has a 1.25 degree draft outwards towards the top to make it get slightly tighter as you push it into the honeycomb surface. Holds your…
A stand to fit the Samsung Galaxy Watch 6 charger that is slightly smaller than the watch 4 and 5 chargers. Added a file for Watch 4 and 5 chargers. I did these at 10% infill, add more infill to make them heavier and have better stability…
I made this box to fit my Tenkara line cards. It it 3 inches round inside and about 1.5 inches tall to fits 10 or so line cards. You can use it for other things if you like. Designed in Solid Works.
Parts needed to raise your Creality Rotary Kit Pro 15mm to allow tumblers and cups with handles to move freely around laser. Parts required: 4 Each of M4 25mm long flathead screws. (I started with 40mm and cut them down to 35mm but have…
This hold a 415mm x 400mm laser honeycomb surface in place for the Creality Falcon 2 laser engraver. You will need 4 of these and place them under the feet and they will hold the surface in place from moving around.
This will hold a red laser to help frame and align items that you want to engrave. I used this laser and power cable. USB Adapter 650nm Red Laser Diode Module Focusable Dot Line Cross Beam 12 * 35mm Lighting 650M-100 (cross)…
Lifts your Creality Falcon 2 Laser Engraver up by 57mm or 160 mm to enable clearance for a Y roller and a 100mm diameter cup. No threading is required the foot will fit into the leg extension. Added 70mm and 100mm sizes.
This is a version of an Alto Recorder found in the book The Amateur Wind Instrument Maker by Trevor Robinson. I broke it into 4 parts to make printing it on a printer limited to 250mm height or less easier as both my printers are not…
Box to hold 7 of your favorite die. Middle slot is larger (1 inch) to fit a D20, the 6 slots around are slightly smaller and fit all other sizes of standard sized die.
I made these templates for my wife to make it easier for her to cut them out with a rotary cutter. You can print them or cut them on a laser engraver. You will need to print 4 of the dbl wed ring lower file and glue them together with CA…
These tires #10188 will fit the Traxxas proline style rims. TPU is best and I did 4 walls at 25% infill for added durability but they are a bit stiff. I will try fewer walls and 10% infill and see how they hold up. They will print faster…
This hanger holds the Resmed hose and a mask to dry on a shower curtain rod. Can work for anything else but the curves fit the Resmed Hoses. The lower hangers are fitted to the hose diameter.
Holds 4 spools of your large spools of thread. Can also hold 2 regular spools on one post. of you want to keep your colors on the same lines. Fits the Skadis organizer System.
This box hold a pair of Oticon "More" (1, 2, or 3) hearing aids with a lid that uses magnets to stay in place. You will need 8 - 6mm diameter x 2mm thick magnets. The fit is a bit tight in some holes and loose in others I found that a…
Holds your acrylic paint bottles that are 2 oz. Holes are 34mm to hold the bottles a little loose.
This foot is for a walking stick I purchased to protect the floors from being scratched by it. Fits at largest diameter is 1 inch and smallest diameter at pointy end is .4 inches and total internal length is 2.3 inches long with a .5 inch…
Wall mounted tape dispenser holds two, 1 inch rolls or one, 2 inch roll. Holes will fit an M6 screw Print 2 tape adapters for a 2 inch roll. If you need it to face the other way you can mirror it in your slicer.
This is a remix of my own design, another crochet hook handle I made for my wife to use on her size E hooks. We made the hook fit farther inside the handle so the flat part is closer to the hook as she likes to use the hooks that way for…
This box will hold your favorite dice set nicely.
This is organizer will hold 3 hot ends for the Flash Forge Adventurer 3 and 4 series 3d printers. Use some double stick tape to install it inside the printer someplace.
A small case to put on your keychain to hold 312 hearing aid batteries.
This handle will fit size J crochet hooks to make it feel nice in your hand. I print these in TPU and they slide on and stay very well. Print vertically for best results.
A thread spool organizer for holding all brands of fly tying thread spools. These will fit inside the Harling Fly Tyer's Stash Box. 2 are required to fit 40 spools nicely and get your fingers in between them easily. I needed something…
This is a 45 rpm record adapter. Easy to get on and off the record table.
This holds 16 of your usb sticks in a drawer or anywhere you like to help keep them organized.
I made these from a 2D picture and created an svg to make the stl in Cura. It is 10 inches finished and ¼ inch seam allowances in the template.
This will hold all the game pieces in the box if the cardboard insert is removed. You will need to print the following to get everything to fit. To also fit Mateo and Peloton expansions. Grand Tour is not included in this set. 1 Rider…
I really liked the simplicity of this model but I need it to be on my keychain or I will for get to take it with me when I go places. Thanks to @Bbrinck_1460947 for the initial design if you just want the box and not the additions for a…
Holds 6 USB sticks that have a 19 mm wide case around them. Also a file for a more universal fit.
This is a handle to slide over a crochet hook that has a 3mm diameter. This model has a few different configurations as I am still working on it with my wife to perfect it as she likes. eventually we may come up with larger configurations…
This is a remix of a commercial Tenkara line card. You can buy something similar for 3 for $5 but I wanted to try printing my own. Still needs a bit more work, but it works well enough. This was my first CAD project using Tinkercad.
This is a lid to repurpose a Vlasic Pickle jar to be a coin bank. Fits a 4 Inch jar mouth. Printed in PLA.
Peg Board holder for pliers and other handled tools.
Game Organizer for the board game Rebirth with a lid for holding pieces in place if game is on its side. Slots will hold all the different shapes needed for each player. Lid does have one way it will go one to create pocketed areas for…
I got frustrated by the new packaging of hearing aid batteries that are not only child proof to open but also human proof. You have to cut the packaging apart just to get at a battery or two. These trays will hold 30 - 312 hearing aid…
This clip will hold a oxygen hose next to a ResMed APAP/CPAP hose used with a oxygen bleed in. Clip is 3 mmm thick and the hose for the oxygen is 6.5mm the CPAP hose is 18.5mm
A small round box that has many purposes this one can hold your rings while you're traveling so you won't loose them.
A box to attach to a keychain so you can always have your hearing aid batteries with you. Holds four 312 hearing aid batteries. Need two .6mm diameter by 1.8mm tall magnets to insert into the lid and the box. Use a little super glue to…
Holds rings of all sizes securely with a threaded lid.
This roller will massage your feet to help with heel and arch pain. Just place your feet on it and roll back and forth. I printed min in TPU but I am sure PLA will work fine too. Roller is 225mm long and 44mm diameter. File for 205mm long…
Templates for a Baby size quilt with the double wedding ring pattern You can print them or use a laser engraver to cut them. Same as the larger version of templates but no gluing is needed.
This will fit the KN12 Flexcut detail knife used for woodcarving and whittling. I used TPU because I like the extra flex.
This block can be used to stretch your calf muscle by placing your foot on it and moving forward a bit and straightening your knee. You will feel it stretch your Achilles tendon. Helps with Plantar fasciitis. I'm not a Physical Therapist,…
Organizer for boards game Tower Up. Fits inside original box but makes room for cards to have a protective cover on them. Most features are the same and have the same function during game play so will hold up better after many plays of…
The base of this antenna is susceptible to breaking if pressure is placed on the connector at the bottom of the antenna. This is a fix I created to keep my DX-88 antenna working. I used ASA because it will be outside in this sun and rain.…
Threaded lid so it doesn't get lost. Fits size 13 batteries.
Keeps a set of 6 handled chisels safely stored and organized in this box. Should fit most chisels that are .9 inches in diameter on the handle or less and 6 inches long. Has a lid to hold them inside when not in use. Box dimensions are 6…
I had an unfortunate accident with my Morakniv and had the stock knife sheath slip off and the knife stabbed me. I came up with this idea to make a cover that would not slip off when you are putting it away. Fits both 120 and 122 style…
This will hold 8 pens for both Colwood and Razertip including the larger heavy duty pens. Hold 18 Colwood tips and has 4 places to put your loose tips for the Razertip interchangeable pen. Printed in PLA but I am sure your favorite…
Holds 5 tubes of your favorite paint that are 5ml and 8ml sizes. Should fit most brands but I only have a few different ones that I like to use. 2 separate files, the 8ml will fit any tube smaller than 8ml too. You can choose what works…
This clip will hold an oxygen hose together with a CPAP hose to make movement easier with the oxygen hose inside an electrical wire wrap. https://www.harborfreight.com/1-4-quarter-inch-x-14-ft-protective-wire-wrap-66985.html Wire wrap…
I had an unfortunate accident with my Morakniv and had the stock knife sheath slip off and the knife stabbed me. I came up with this idea to make a cover that would not slip off when you are putting it away. Fits both 120 and 122 style…
This blade bank will hold your blades until its full, then tape over the slot to toss into the recycling or however you dispose of your blades. Fits Rotary cutter blades that are 45mm or less too. The slot is 46mm long to accommodate…
Holds a Craftsman 5 pc chisel set on a pegboard. Should fit anything in the slot that is less than .615 inches diameter of the shaft and has at lest 15 mm of room before the tool flares.
This will hold 10 Babylock or possibly other brands of sewing machine sized bobbins. Print this in TPU because it needs to flex to get them in and out.
This handle will fit tools that have a 6mm diameter shaft. Should just push right on with a little effort. I print these in TPU. I made it to fit in the palm of your hand nicely because its a lathe tool I made it for.
Replacement handle for the levers on the lawn mower deck. This should fit either front or rear levelers. I printed it in TPU because of the retaining clips on the handle force the material to flex a bit during installation. ABS may work…
This thread should fit 1 inch 8TPI #2 morse tapered wood Lathes. I printed in PETG and PLA. PETG seems like the way to go for the heavy chucks because it can take the flex, but pla plus would work too. I have found that pegboards do not…
Print this in TPU to hold your cable in a neat and organizable way. Needs to be flexible it is 170mm long and has 20 slots for adjusting to smaller wrapped cables or rope. 3 sizes of files are to change the size of the circle that locks…
This clip will replace the clip that holds the 2 halves of the Lifetime folding benches Model # 80309. The original part is ABS, I printed the replacement in ASA because that is what I have. PETG would probably work too but you can let me…
This is an organizer for Shifting Stones. I created this in SolidWorks.
This part will take up the gap left by a new replacement lawn mower wheel with a ½ inch axle. Spacer is .20 inches thick to keep the wheel seated in the right place against the mower deck. Printed in PLA.
This is a remix I created in SolidWorks. Printed in PLA with Ender 3.
I needed a visibility cone for my flashlight so I made my own. I use it while walking in the dark or if I need to direct traffic when volunteering. AKA "The Lackland Laser".
Case with lid that is friction fit for Mini Diamond Needle files or similar set to this one, https://mountainwoodcarvers.com/collections/rasps-files/products/diamond-file-set Internal slot dimensions are 4 inches long (101mm) x .222…
This is a keychain for holding size 13 hearing aid batteries. I use a 6mm round magnet to hold them together, it should fit in the center hole and put some thin CA glue to make sure it stays in. Holds 4 batteries. The thinner tab version…
My wife asked for something to hold her yarn spools while she uses them. I came up with this for her. The spindle is .25 inches and has a 1% draft from the base to the tip to make it easy to put the yarn on. You may want to print this…
Remade this pegboard filament support to hold 1 roll of filament to be used with my MMU3. Added a 1 inch roll with bearings, although not needed but make a nice with with the pegs used for axel's that can be removed easily to replace the…
A hanger for the office cubical walls. can be shared with your other cubies.
This is an Indexing pin for my wood lathe fits my Jet Lathe but should be a standard fit for most wood lathes. Pin diameter is 6.25 mm and the knurled handle is 10 mm diameter. This pin has no threads so you can insert and remove it…
This coupler is 60mm to connect two hoses together so you can extend their reach. Coupler is 100mm long to make enough room for each hose to clamp onto. You will need a hose clamp to secure the hose to this coupler.
This is a small open sided box to hold 100 packets of Stevia Sweetener. Each slot holds about 50.
This cover fits the Helvie Chip Carving blade for woodcarving. 9 mm tall x 25.5 mm long. May fit other blades the same length but you can test that out if you need to.
A quick easy way to help install a pegboard to a wall with a ½ inch (12.5mm) and a ¾ inch (19mm) space for using the pegboard. I've found the taller works better.
A simple ring to mount a mason jelly jar to the wall to use as a toothbrush holder. Easy to remove for cleaning when needed. The holder is 69mm to fit an 68mm diameter jar that is held in place by the glass rim. Screw holes are M4 but you…
A place to put your stuff at night so you can keep it organized.
This is a replacement battery cover for the Midland XT FRS Radios
This will fit the Flexcut FR307 V gouge chisel I used TPU because it will give a bit when installing and removing from the chisel. Print TPU at 30 mm/s or slower.
This will cover any blade that is 2 to 2.25 inches long Specifically designed for the Helvie Hogger knife. I printed mine in TPU.
I made this to hold the larger Yarn spools for my wife. My first design was on Tinkercad. This is a remix of that one only more refined and better suited for its purpose and just looks better instead of functional. Spindle is 1 inch and…
This Support is for the DX-88 ( HGN-DX-88) Hy-Gain Antenna. Should fit same as original part. Print with flanges horizontally and at highest point from build plate. I recommend printing in ASA 60% triangular infill. I used a Prusa mini +…
This will protect the chisel from damaging you or it's self. Would probably work in PLA but I printed it in TPU to make it easier to install and remove with a bit of flexibility.
This will fit a blade the is 1.75 inches x .5 inches specially for a Helvie roughout knife. Printed in TPU to help flex when installing and removing and be softer on the blade. Fits either style with the cutting edge on the flat or the…
The support for the sun shade broke on my swing and I discovered it was very weak and had zero infill (so of course it broke easily). I was able to remove the broken part stuck inside and modeled it in SolidWorks and figured anything I…
This is a cover to protect you and the chisel from damage. Fits the Flexcut FR308 skew chisel. This would work in PLA I'm sure, try it and post you make here. I printed in TPU to make it easier to install and remove.
A cover for a 1.5 inch woodcarving knife made by Helvie. Printed in TPU to not harm the blade.
The hot plate connector cover on my Adventurer 4 got deformed from the heat and no longer worked right. The cover's clip also broke because it was melted into place. The original part was made from ABS. I recommend printing it in ASA…
This will protect the Flexcut FR306 gouge chisel from damaging you or it's self. I printed it in TPU but PLA will probably work. Try it and post your make here. TPU makes it easier for me to install and remove because of its extra…
A sheath for the Helvie 1.25 inch detail knife. Blade is 1.25 x .4 inches. Printed in TPU to make install and removal easier and not mar the blade. These blades are handmade so dimensions may vary a little.
A cover for a 1 3/8 inch long and 3/8 inch tall blade. I print these in TPU to make them softer on the blade.
This is a tool to help tighten the nut on the power connector for the GCE Zen-O Oxygen Concentrator. This nut will work its way off and you have to return to the medical supply there you purchased it to have it tightened back up with a…
Small box to hold several drill bits hole sizes are 13mm 10mm and 8mm to hold various size pits I use and that sit loose on my benches.
This should help to hold your Babylock model U foot pedal in place on the carpet. The spikes are sharp when you print them. Be careful. I split the spike apart from the foot base to make it easier to print without supports. I also removed…
This fits the Hock Chip Carving Stab knife. It may fit other blades that are 13 mm tall and 26 mm long and 1.5 mm thick. I printed it in TPU to make it easy to install and remove and not mar the blade. Print vertically with the slot…
A cover for the Modified Blade Chip Carving knife from mychicarving.com I like to print these in TPU.
Fits a chip carving knife made by Pfeil or is 36 mm long and 16 mm tall blade is 1.75 mm thick. I print these in TPU for easy install and removal and softer on the blade.
This plant support is 7 inches tall. You can scale it up in your slicer if you want it larger. The arms on the sides will support the vines of your favorite house plant.
Needed to replace an old threaded suction cup on a Quilting ruler handle and couldn't find any to fit so I came up with this. fits most suction cups with the slot on the top you can find most anywhere. Thread fits .3750-16 inch which…
