Liczymy pasujące modele…
This is a design that allows you to create a customized Perler (aka Hama / melty beads) bead base in Fusion 360. I originally designed this in OpenSCAD but found that it took way too long to render. Fusion 360 allows you to have a…
This is a case for the Heltec Wifi LoRa 32 (V2) development board ( https://heltec.org/project/wifi-lora-32/ ). I wanted to be able to have a case that can hold a lithium battery so this is what I came up with. I've included a version of…
A wrench that you can use for your Hayward CL200 Series Chlorinator, make it's much easier to remove the cap. I printed this with PLA on a printer with a 300mm x 300mm bed. I had to rotate the print 45 degrees to get it to fit the bed. I…
I bought a FYSETC PanelDue clone ( https://www.aliexpress.com/item/4000152814384.html ), and I quickly found out when I received this that "clone" is probably not a great description as it is more like "inspired from". I guess I should…
This is a replacement part for Hayward PVXH011SA. Would recommend using ASA or ABS, and since this is a tall and skinny print, would recommend printing with a brim as well as printing slowly especially as the top part is printing things…
I found that the LM8UU bearings would wobble in the factory pillow block due to their being too much play in the bearings. I created a design that will hold the bearings in place much better and gives a tighter fit and has eliminated the…
The original mount that I designed worked well, but I didn't like the cooling solution that I was using. I've modified the design to allow two 5015 blower fans to be used on each side. The improved cooling makes a huge difference. You'll…
The piece that holds my KDLINKS X1 dash cam to the suction cup mount had broke and my camera fell. Designed this as a replacement part. I have included the Fusion 360 file, along with several other formats that will allow you to customize…
Here's a mount to be able to use the BIQU H2 extruder with the Eryone Thinker SE. There's an option to use this with a cable chain. This is the one I used :…
I ran across a Chimera clone for a very low price and decided to try it out. I have found that the mixing nozzle doesn't mix well for PLA filaments but does work well with translucent PETG filaments. For the times that I want to print…
I designed this to be able to use a piezo probe on the Anycubic Predator. Since the head is close to the heater cartridge, I would recommend printing this in PETG or ABS (or any other material that can withstand high heat). Update 1…
Here's a mounting block that will allow you to mount the RedLizard hotend to the stock cooling shroud of the Anycubic Kossel printer. You'll need 4 x 2.5mm screws with round head that will screw into the hotend, and you'll need to remove…
To wszystkie aktualnie dostępne wyniki.
