Liczymy pasujące modele…
Picatinny Rail Risers in 13mm, 19mm, and 25mm. prints in orientation as provided without supports (standing on end) bolt hole is covered by a thin membrane to improve print quality, must be drilled out post-process PETG recommended as…
A Simple Handstop for my Caliburn pump foregrip mounts via Picatinny rail. might also be usable for airsoft or real firearms, but only tested on a Calburn 'nerf' blaster. (temperature and recoil considerations) Helps keep your hand from…
Game Face Trion dart blaster. replaces the original barrel retaining socket with a Clamp, so that the 16mm aluminum tip is exposed. This allows for mounting standard SCAR attachments, etc. hardware needed: -3x12mm bolt, with a socket head…
A trigger shoe for the Game Face Trion dart blaster. I found the flat faced trigger to be uncomfortable, especially given the heavy pull. this wide and curved trigger shoe spreads out the pressure felt by your finger. Snap-on part. must…
Angled Pump Grip for the Nexus Pro X dart blaster. Hardware needed: Re-use 4 Screws from Original Grip. Optional: Re-use pin and roller from Original Grip.
Buffer Plate Sling Mount for the Nexus Pro hardware needed: 1 5mm x 20 mm bolt, with a head no wider than 8.5mm 1 5mm nut with 8mm wrench flats don't overtighten, your buffer tube is made of plastic Update: uploaded a .step file of the…
Buffer Tube Sling Mount for the NeXus Pro X print support material strongly advised hardware needed 3x15mm bolt with head no larger than 6mm 3mm nut with 5.5mm wrench flats
Dart Zone (Adventure Force) Nexus Pro shotgun-like pump foregrip kinda a hybrid pump grip / angled foregrip note, the roll bar up front is a thumb rest. meant to be held with thumb angled upwards like a 'traditional' rifle grip, not…
Replacement Dart Pusher for the Dart Zone MK3 flywheel blaster. Designed to correct problems with Jamming, and Double-Feeding. in stock form on release**, the MK3 has problems with jamming when using Talon magazines as well as problems…
A Shortened Magazine Release for the Nexus Pro, Max Stryker, and Dart Zone Pro MK3 When primarily using half-darts with the magwell adapter, the main magazine release is not used. So I reduced its size to get it out of my way. prints…
“Door Delete” for the Nerf Rival Kronos blaster. Replaces the loading door flap. Prints without supports (requires a 60degree overhang)
Safety Delete for the GameFace Trion dart blaster fills in the hole where the safety switch used to be print standing vertically on end.
Minimized barrel for the Dart Zone Pro MK3. Also Included: STEP file for a blank barrel. For Remixing your own barrel designs. Prints Without Supports; overhangs should bridge. Update: added adapters to install a Nexus Pro cosmetic flash…
Spring Spacer for Nerf Kronos/Heracles/Mercury (identical internals) Increases spring compression for higher fps. around 15fps higher than stock for my blaster 7mm tall spacer. Highest that would still catch. Unlike most spacers, this one…
for Game Face Trion dart blaster offset spring hook for the dart guide. This reduces the spring tension on the dart guide; I was annoyed by the resistance when closing the breech. prints without supports
The DZP MK2 foam dart blaster has a design problem the screw posts that connect the plunger tube to the slide grip are not supported by any webbing, over time they can crack or show signs of plastic stress. This part is meant to provide…
My DZP MK3 was having occasional inconsistent Rev Trigger response. the problem appeared to be that the plastic mounting was flexing this brace stabilizes it. just drops in, gets held in place by shell. Category: Toy & Game Accessories
Optic Mounting Rail for nerf Pathfinder no shell cutting needed, replaces the existing rear sight guard wings hardware: 1 5mm x 30mm bolt with a head no larger than 9mm 1 5mm x 40mm bolt with a head no larger than 9mm 2 nuts with 8mm…
Spring Spacer for Nerf Strongarm adds about 5fps now doesn't interfere with slam-fire (old version -deleted- had issues) note: installs on the rear end of spring, not on the plunger head Category: Toy & Game Accessories
a cosmetic cover for the Dart Zone BCAR by covering the bearing holes, allows the blaster to be safely ‘deprimed’ by covering the barrel with a fingertip
Seal Blowout Guard for Nexus Pro The Nexus Pro has an unusual telescoping gas tube in its breech system when modded for a tighter barrel seal and powerful spring, sometimes this telescoping piece will overextend (blowout) and leak air.…
Replacement front for the Aeon Pro X blaster to allow longer barrels. hardware needed: one 3x15mm bolt with head no wider than 5.5mm one 3mm nut with 5mm hex flats a new barrel, 16mm aluminum. approx 250mm is a good upgrade Notes: the…
replacement Trigger for the nerf Pathfinder blaster enlarged cam surface so it fires with a shorter pull print parts in orientation as provided finger pad snaps-on**, no glue needed. dimensional accuracy is critical though, especially the…
a reinforcing brace to keep the trigger linkage from lifting upwards and missing the catch
Improved Trigger for the Dart Zone Dictator much less slack on the trigger pull. prints without supports snap-together (PETG recommended to allow flex-snap)
Breech Blowout Guard for the Dart Zone Max Stryker 'nerf' dart blaster. The telescoping breech in the Stryker can slip forward and 'blow out' the air seal if the blaster is modded for higher pressure -tighter o-rings, barrel, etc. This…
The Nerf Pathfinder is built weakly. My catch assembly (traffic cone) broke loose as it was only mounted with 2 posts to resist spring recoil. This reinforcing brace repairs the issue. the Priming Indicator flag needs to be removed to…
Safety Delete for the Nexus or Aeon Pro Replaces the safety lock, so you can disable the function but not have a hole in the side of the blaster prints without supports Category: Toy & Game Accessories
Trigger Safety Delete mod for the Nexus Pro X. covers the hole in blaster after removing the original safety. Snap-in. (print 2, one for each side)
Spring Guides for the NeXus Pro X. If you take your blaster apart often for tuning, you'll find that the Small Springs for the magazine and catch like to ‘sproing’ very easily and get lost. these small guide parts help to retain the…
The Breech Lock on the Tomcat has some play to it which can allow gas to leak if wiggled the wrong way. This shim tightens up the lock. Glue In place. precision matters! do a fit check and test first.
X Axis Belt Tensioner for Monoprice Maker Select V2 (Wanhao Duplicator I3 rebrand) Wasn't happy with any of the many existing X tensioners for this printer either having clearance issues with my other mods, or having a bolt that's far off…
The Nerf Pathfinder has a magazine compatibility issue first generation rival magazines do not catch properly, leading to feeding problems. this is due to a change Hasbro made to their magazines to block 3rd party blasters from using them…
Locks out the adjustable stock on the Nexus Pro One annoyance I had with the Nexus Pro adjustable stock, is that you it can slip if pulled (like when picking up the blaster from the stock) (pushing on it when shouldering is fine tho) This…
Replacement Flywheel Rev Trigger for Nerf Rival Perses blaster about 4-5mm lower profile than the stock trigger; more comfortable for small hands Additionally, will stay engaged so long as main trigger is held down. (this feature appears…
Nerf Retaliator Trigger Spacers These Spacers Shorten the trigger pull distance of the Retaliator. Makes the Trigger Pull more responsive. Attach using Epoxy. Post Printing: there is a .5mm Support wall that should be Cut off before…
the Deuce Pro has problems with unreliable cylinder rotation one fix, is to make the cylinder non-removable as the cylinder is now fixed in place, reloading is done by pushing darts in from the sides. note: blaster must be opened to…
allows old Dollfie Dream III (3) lower bodies to be joined to a DD F3 upper body. This can have uses; where you own an older DDIII with broken shoulder or arm joints. Volks has discontinued DDIII parts; so one solution is to replace with…
replacement pump grip for Nerf Pathfinder bigger and grippier hardware: reuse existing screws prints without supports in orientations provided rail part screw holes covered by thin wall to improve print quality, must be drilled out post…
Safety Delete for DZP MK2 drop in replacement for the safety switch, to disable the function without leaving a hole in the blaster. prints without supports Category: Toy & Game Accessories
Replacement Magazine Release for the Adventure Force Spectrum Allows compatibility with Nerf brand 18round Magazines and 25round Drum -original mag release would hit a bump on the rear of those magazines and interfere with removal. prints…
Replacement magazine release lever for the Nexus Pro short magazine adapter I didn't like the original curved lever since it kinda snags my thumb when pulling the magazine, made this straight one for smoother operation UPDATE: added short…
A Fully enclosed trigger guard for the Caliburn. I was not happy with how the original was open at the front; it tended to wiggle, and it didn't give me a good place to 'rest' my index finger when just holding the blaster but not…
Efficient Air Restrictor for the Pathfinder Blaster makes dry-firing much safer and quieter, without sacrificing firing performance -blaster no longer sounds like it's exploding when you dry fire at the end of a magazine, a very common…
Neck hole plug for Super Dollfie filling in the neck hole, helps to keep the rubber friction pad from bunching up, so her neck doesn't get all floppy. Pull the elastic hook up and slip it under. -I've only got 1 super dollfie, so I don't…
Modification part. for Dollfie Dream III body. shortens the torso by 5mm to reduce the waist seam gap, and give some variety
Barrel adapter for the Dart Zone (Adventure Force) Nexus Pro allows the mounting of a longer protruding barrel tube (16mm) aluminum barrel hardware needed: 5mm x 10mm bolt, head diameter less than 9mm 5mm nut with 8mm wrench flats…
Pistol Grip Conversion for Nerf Rival Takedown XX-800 -because not everyone likes the 'blunderbuss' style horizontal grip it comes with Drop-in shell replacement piece, no shell cutting required, no hardware required (re-uses the existing…
Drop-in safety button replacement for Dart Zone Max Stryker dart blaster. Category: Toy & Game Accessories
Plunger Head Shim for Nerf Kronos / Heracles (and possible other Kronos reshells) Place this shim on the plunger head underneath the O-ring for a tighter seal. Same concept as the oldschool teflon tape wrapping method to tighten seals;…
a Rear Sight for the Atlas foam blaster Prints without supports. Optional Hardware: 5x30mm bolt with head no larger than 9mm nut with 8mm wrench flats -OR- secure using 3d printed cotter pin
The Cable Chains on the MP Maker Select V2 are not being properly utilized in factory form. Chains need to be constrained, so that they ‘unroll’ gradually across their motion, to spread cable flex out along its length and extend lifetime.…
Pump Grip for the Nerf Artemis hardware: 3 nerf screws salvaged from the Original Vertical Grip 25x5mm bolt with head no larger than 9mm 5mm nut with 8mm wrench flats prints in orientation as provided, no supports Update: steepened grip…
Locks out the stock length adjustment on the Max Stryker foam dart blaster. the included adjustable stock can slip if pulled backwards -such as pickup up the blaster by the stock. Clipping this part around the release lever prevents it…
Nerf Rival Knockout Linkage to Open Breech, when Blaster is Primed. Saves a step vs opening breech manually. blaster shell cutting is required detailed explanation here:…
Very Tall Rear Iron Sight for X-Shot Chaos Meteor blaster. Intended to compensate for my blaster shooting low when used with my Chaos Meteor Accurate HopUp mod. https://www.thingiverse.com/thing:3913710 But if you don't have that issue;…
The Breech on the Rival Atlas has some wiggle to it leading to inconsistent performance depending on how your hold the pump grip forward this replacement arm is angled back a little more than original, so it presses the breech closed…
Replacement Trigger for the Rival Atlas I found that after increasing the mainspring weight, my Atlas had inconsistent trigger release this replacement trigger has a larger cam slope than the original, to better engage the catch…
Shoulder Stock Adapter for Nerf Rival Artemis Allows Artemis Blaster to mount Nerf N-Strike/Modulus Stocks. Installs by replacing the sling mount, additional support via 5mm bolt hole (need to drill blaster shell) Chose to go with a large…
A better trigger for the Worker Cheetah stronger, more comfortable Prints without supports PETG strongly recommended as finger pad is a snap-on part and needs to flex. Optional: Catchguide part helps to keep the catch spring aligned, for…
This is a mod to make the Atlas smoother to reload. there are two parts here: Reversed Mag Catch -which changes the direction of the mag release so you pull the buttons rearwards (instead of pushing them forwards) so it matches the…
Drop-in Safety Delete button for the Adventure Force (Dart Zone) Conquest Pro foam dart blaster. Also Fits the newer Max Dictator Print standing on end as provided. Category: Toy & Game Accessories
Rear Iron Sight for Adventure Force (Dart Zone) Liberator nerf Blaster Sandwiches into the stock rear sight, no need to glue. Intended to work with the existing flip-up front sight. See photo for Sight Picture similar to a real-steel…
Updated Design 2022 The X-Axis Gantry on the Maker Select can be a little wobbly, since the span consists of only the 2 x-rods, with their ends only held in by 1 set screw each. This Brace uses a threaded rod to help stiffen things.…
T-pull Priming Handle for the Nerf Hyper Rush-40. As the Rush-40 needs to be held upright when priming in order to feed properly, racking the slide is problematic - I habitually rack pistol slides by holding them sideways. Adding a T-Pull…
Picatinny Rail for Nerf Rival Artemis blaster drop-in replacement for the stock Rival rail Remove the top two screws and spread blaster shell, slip in without full disassemble. Update 2021 Revisited and rebuilt this old design Prints in…
Picatinny compatible rail for the X-Shot Orbit blaster. replaces the orange cosmetic (non-functional) rail. The teeth are sawtoothed, to allow printing without supports. But it will still work with most optics; 5mm pinching bolt still…
Vibration-Dampener for Takedown when using K25 spring. the K25 spring is wider diameter than the original spring I was noticing spring 'ringing' when firing This spring guide fits over the plunger rod for a better spring fit to reduce…
Shimano Hollowtech 2, Bottom Bracket Sleeve. For use with 100mm wide shells in Fat Bikes. Replaces the narrow 68mm sleeve. Transfer the O-rings. -While the plastic sleeves are not a structural part, and fat bikes can get by without them.…
Covers for the air release holes in the Trilogy/ShellStrike Shells. Does the minor loss of air make a difference? Who knows? In any case they make the shells look nice. Category: Toy & Game Accessories
Adventure Force Liberator (nerf blaster) Reloadable Magazine Mod/Fix The Liberator is a nerf blaster with pump action shotgun ergonomics it uses an 10 round internal tube magazine under the barrel; potentially loads of fun for a Humans vs…
This is a replacement Slide Lock for the DZP MK2 Requires 1 Volute Spring, harvested from a bicycle wheel quick release skewer. (very common item, see photo reference) Category: Toy & Game Accessories
Spring Spacer for Nerf Alpha Strike Fang QS-4 9.5mm tall, maximizes spring compression slotted spacer to allow installation without removing plunger head Category: Toy & Game Accessories
Spring Spacer for the Nerf Vision XXII-800 adds 5mm of extra compression (theoretical max) boosts FPS from an initial 85fps up to 100fps. -noted, that online reviews rated the default fps as 100, mine might have been a lemon; unclear what…
Converts the front sight on the Rival Pathfinder to use a Fiber Optic Hardware: .078" Fiber Optic Category: Other
Replacement hopup tab for the Nerf Rival Takedown Lost my hopup when tinkering with the blaster. Very small part, not glued in, easy to lose. 3d printed replacement. Pointed tooth shape instead of the official arc shape; I believe this…
Spring Spacer for the Nerf ShellStrike DS-6 Blaster prints in two halves so you can install them into the plunger head without removing the plunger rod. (see photo, yellow spacer) In theory, there is still more room for spring…
50mm Radial Fan (snail fan) adapter for Monoprice/Wanhao Maker Select Extruder cooling. -the stock 40mm Axial heatsink fan is weak. Inadequate extruder cooling can be a problem, especially if using an upgraded all-metal hotend. Needs more…
Spring Spacer for the Nerf Rival Finisher increases the Spring Compression of the stock spring approx 100fps vs the 90fps stock velocity installs at the fixed end of the spring (next to the catch, not on the plunger head end) Category:…
Spring Spacer/Adapters that allow the Rebelle 4Victory to install Hammershot upgrade springs. The 4Victory is a less common blaster, so it has fewer options for springs versus the popular Hammershot. Two spacers, one for each end of the…
Snap Together Dodecahedron based Star Ornament Need to print 12 Faces, 30 Edges. Warning: must be PETG or better. One way snap connectors need flex to insert without breaking. recommend transparent materials with visible infill for best…
Replacement Grip for nerf Rebelle Messenger Comfortable replacement for the skeletal cheesegrater grip slightly larger and set farther back to fit older hands hardware needed: 2x 5x20mm bolt, head diameter less than 10mm. head height less…
Rebelle Secret Shot (purse blaster) Grip extension. fills in the sling mount cutouts on the grip, so you have slightly more to hold. Still allows the blaster to fold up into purse form. Metric Hardware Required: m5x25mm bolt, with a head…
New Trigger for nerf Finisher XX-700 rounded instead of the odd straight blade removes the hard 'click' feel from the trigger pull hardware required: 1 Volute Spring (harvested from a bicycle wheel Quick Release) Prints without supports…
a modified Caliburn Upper Magwell Areas around takedown pins are thickened to address cracking issues. Overhangs that do not print cleanly are fixed minor postprocess needed: bolt holes have .2mm 'bridging' membranes across them to…
Extended Priming Slide for the Nerf Rival Finisher xx-700 The original slide was too small, and also had slippery sides that were hard to grip. Designed this cover shell that clamps over the slide to add grippy hexagonal textured sides.…
Following the mofset upgrade guide here: https://3dprinterwiki.info/heatbed-terminal-burning-fix-with-mosfet-board/ but wanted a more solid mounting bracket than the one's listed. thicker frame, smaller footprint
Replacement battery catch for the Nerf Perses (the hook that holds the battery pack in) The original catch broke on my Perses, designed a replacement that's thicker. Category: Toy & Game Accessories
Adventure Force Sentry X2 Foam Ball Blaster Cover piece for grip safety removal, replaces the safety with a simple finger groove. Lanyard point cover pieces, to extend the usable grip area and improve comfort. Safety Cover drops in place,…
A clip to lock the Perses hopper door from opening. Useful if doing a cut door (mini door) mod; since you'll want to main flap to stay shut as no longer used. Category: Toy & Game Accessories
Experimental 'choked' barrel for the Rebelle Messenger the concept is to have a relatively loose fit around the dart for the majority of the barrel. but a tighter sealing choke section at the front. This should have similar benefits of a…
Replacement Magazine Release for Nerf Rival Finisher converts the push-button mag release into a lever release much easier to pull with one finger as you simultaneously grab the magazine. Hardware required: one 20mm x 2mm steel pin -easy…
Spring Spacer for the nerf ICON series re-release of the Specter Rev-5 (not for the Original version) (might also work on Elite Specter Rev-5) Increases fps from 65, to 70-ish. installs on rear of spring, not on plunger head Category: Toy…
Extended 'magazine release' (follower retract switch) for the X-Shot Chaos Orbit Blaster. Sticks out more than the original, to make it easier to pull. Category: Toy & Game Accessories
Short Reach Mag Release for Caliburn Rival Moves the release lever forward, closer to the magazine and makes it smaller. So that it is easier to press with your off-hand thumb while simultaneously grabbing the magazine itself. (AK style)…
5mm Spring Compression Spacer for the Dart Zone Apex foam ball blaster increases Fps to about 105-110 note: installs at the fixed base (rear) of the spring, not on the plunger head Category: Toy & Game Accessories
Redesigned HopUp unit for the Dart Zone Ballistix Ops Apex in default form, the Apex fires low, shots exit at a downwards angle that makes the iron sights unusable. This replacement HopUp fires Level shots, 25ft shots line up with the…
Retention Clip for the vertical takedown pins on Rivalburn. (might also fit the other Caliburn variants, not tested) I was having issues with my takedown pins walking loose over time, so made this cover that keeps them in. Slides onto the…
To wszystkie aktualnie dostępne wyniki.
