Liczymy pasujące modele…
I was having some problems sanding some stuff.. and my normal files and sandpaper wouldn't reach the smal crevises.. so after asking some help and info at the amazing roup of proptarts ( https://www.facebook.com/groups/theproptarts ), i…
A very quick dirty 3D Scan of the Quest 2 Controller. (Right one) I wanted to do some Wall holders for my controls but I couldn't find any reliable source online for the controls (except paying on CGTrader). So, I decided to use our 3d…
I dont like the actual models of solaire's helmet, so i decided to make it again. I based my design on the 3d model of JKHub which seems to be pretty close (and in high detail) to the original one from Dark Souls 1. (…
This is a remix of the Control. The only thing that I've done is change the STL into a STEP or Solid model for easier handling in CAD programs. Thanks to @stevesch for the original Scans. This couldn't have been made without him. The STL…
The original model made by Swesen is amazing. Since I wanted to put my little bag and a few items from the sides, I decided to reinforce a little bit the hooks to be on the safe side. Also decided to align the base and make it a little…
Just a random scan of a gordon freeman action figure I did. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Scans & Replicas
I took this template to make the dice in a way you would need minimal sanding and supports... pretty fast and nice to make. just remember to print it upside down! the fases of the dice must go up, not on the heatbed Category: Sculptures
This is a Fan made katana for a propmaker. (Cosplayer instagram down below) Shura's sword (Katana actually) [ooor demonic sword, as you wish, suit yourself =P ] from the anime Ao no exorcist. Ideal for a cosplayer Interesting Data: Almost…
The origianl one is awesome, but i wanted a smaller one for "not so high" glasses. when i made it smalled i'd give me problems in the walls... so i decided to make this one which is easier to print due to the flat walls. it's a nice print…
Just a Dremel Holder to put that thing in the wall. I couldnt find anyone that worked good with the flexible attachment so I made this one. Category: Tool Holders & Boxes
The original design was for wood screws. Since I wanted to use M5 screws (repurposed from another project) I decided to redo this model. I did not find the original piece here on printables so i cant mark it as a remix, but it can be…
I designed this using Fusion 360, it's a neat little place for that useful spatula to be. the draining system may not be the best one, but it works, and it's certanly better than having the resin covered spatula over the desk. A small,…
So, I lost my dremel sanding bits and I wasn't in the mood to go buy some more... so.. I knew the M3 screws fit the dremel... so all i had to do, was 3d print a sanding bit, with a hole for the screw and superglue a scrap piece of…
El diseño original se veia bonito pero presentaba 2 errores clave. 1ro; El diseño estaba roto y tanto Simplify 3D como Cura, hacen un "tope" o un techo a la mitad de la impresion que en el diseño original no se nota hasta que se manda a…
For those who want to simulate the wood grain. Its a simple model. Soon I'll add a version for flexible materials. **Sorry I don't have an actual print, run out of fillament (I know.. disgrace to me, my family and my cow) Category: Art
Just a replacement for the ol' keyboard of a friend Category: Replacement Parts
Las tapas para arandelas, una es para trabar y pegar en el circulo, otra se pega externamente.. El pin es de un tamaño de 11mm de diametro pero van a tener que adaptarlo al diametro interno de su arandela. Category: Toy & Game Accessories
i love making pendants, rings and similar stuff out of silver or nickel silver, (or alpaca as we call it in Argentina). one of the more tedious tasks is the sanding.. and some times there are small parts where only sand paper could be…
I always used the Car phone Holder (designed by KFix) but it would always slip away in a sharp corner... I also loved @LoboCNC phone holder.. I think it's the Ultimate phone holder. I printed 4 of his, and 3 more of DrLex Notched version.…
Just a visual accesory to complete the project Category: DIY
I found out the nuts and bolts that where connecting this piece, had some play in it so i designed the whole thing again... just an over-engieneered solution that in my opinion looks a little bit more futuristic.. not really necessary,…
i loved Megreth design but it was floppy and the washer wouldnt fit in the original model. This one adds a little pusher to keep everything in place and firm. Also, i added another piece for the autolevel. it works but it needs some hand…
Pequeño rediseño que hice para que te quedara mas limpio el Original. espero que te sirva para hacer lo de los moldes y demas. Fui lo mas preciso posible respecto a tu pieza. los 4 porta-huevos tienen un grosor de 3mm y 2mm la base…
i loved this model but it was just too difficult to print as it was. so i remix it meshmixer, sand sliced it for better/faster printing. Category: Hobby
the first time i built my printer, i hated how much unnecessary time i spent puting the Z motors.. everything was loose or not in perfect alignment. Then i found Lexa's one and i loved it, except for one thing.. i had to screw the piece…
This is just a coupler i designed for the tronxyXY, I dont liek the metal ones (dont ask me why, i just dont) so i made this one which are much easier to install and less problematic. NOTE: i know the springiness of the metal couplers…
it was saturday, my local metal store was closed so i couldnt buy materials to build a wolverine system by myself... anyway i dont have the soldering stuff either xD so i went to fusion, made the 2" one that i'd screw to a piece of wood,…
Just a brief set I used for a prusa Clone. the clipping one is used on X and Y, and they dont move at all, the 90 degree one on Z Category: 3D Printer Parts
I made this piece from scratch using the original one created by -pekcitron- as the base template. Why i did this? I had a clone prusa, and it's rods where larger than the original one. I didn't realize this, unitl i bought the 2040…
una pieza que pidio una persona para reemplazar la original que se rompio/perdio, no esta disponible. Category: Replacement Parts
Todos los chicos populares tienen una, asi que yo hice una para Vitofeli (? Todavia no es la moneda oficial... pero a ver si se la juegan y la hacen. =P Category: Fashion
Un protector para el ventilador, se puede poner del lado de adentro o afuera de la carcaza de metal. Yo la use del lado de adentro y del lado de afuera coloque un mini filtro para evitar que entrara tanto polvillo. How I Designed This…
Something im doing for Martin. Category: Replacement Parts
This is a Quick model i did for the 2 pin connectors the gt2560 needs for the endstops. (Recommend to print it 10% bigger) Print Settings Rafts: No Supports: No Resolution: 0.1 - 0.05 Notes: Print at 10mm/s Doesnt matter the infill…
To wszystkie aktualnie dostępne wyniki.
