Liczymy pasujące modele…
RC crawler obstacle for your Axial SCX24 or Traxxas TRX-4M! Designed to fit just on a print bed for a MK3s. Wide enough for both an Axial SCX24 and a Traxxas TRX-4M. I printed this in PETG (but PLA works as well) using fuzzy skin to help…
Wydruk około 18,71 €–22,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Crawler Obstacle #1: Simple mountain. Exactly as it sounds - a typical mountain climb for an RC crawler. Scaled to fit exactly on a MK3 print bed, and width right for an SCX24 or TRX4M. I printed with PLA, turned fuzzy texture on to help…
Wydruk około 15,55 €–19,00 € nettoWstępna wycena jednego wariantu
RC Crawler Obstacle #3: Flex Twist. An obstacle designed to test the flex and twist of your Axial SCX24 or Traxxas TRX4M! As created, it will just fit on a MK3 printbed. Printed in PLA with fuzzy skin to help with traction. You can see it…
Wydruk około 12,66 €–15,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
RC Crawler Obstacle #2: Complex mountain. Made from some simple geometric shapes, this obstacle really can be challenging! Designed to fit directly on the MK3 print bed, and fit the track width of an Axial SCX24 or Traxxas TRX-4M.…
Wydruk około 15,53 €–18,98 € nettoWstępna wycena jednego wariantu
Inspired by my son - after he took my “wave” crawler obstacle and turned it upside down! Seriously! A simple print - that when turned upside down becomes a simple teeter-toter or balance-bridge for your rc truck. Can you get it to…
Wydruk około 7,80 €–9,53 € nettoWstępna wycena jednego wariantu
My son wanted a better way to organize his money and gift cards, so he and I designed this ultimate bank! At the front, is a slot for the common US coins (quarter, nickel, penny, dime) with handy “pullers” that allow you get access them.…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
RC Crawler Obstacle #5 - the Chevron Bounce. Designed with the Monster Truck chevron pattern in mind, and trying to really upset the suspension of the crawler. I printed with PLA and turned fuzzy skin on to help with traction. You can see…
Wydruk około 16,16 €–19,75 € nettoWstępna wycena jednego wariantu
This is a hanging drift clip for 1/10 RC drift tracks. Prints in 4 parts. 1 upright - prints flat on the back with the feet pointing up. No supports needed. 1 crossbeam - prints on the side. Supports required under each interlocking…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
IT WORKS! :) After dreaming this up for awhile, I finally got it to work! This is a swinging drift clip. The base and top come together in a 45 degree angle that allows the top to swing back to the straight position after hit. The holes…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
These are shrunk-down files of a brick wall to 1/10 scale. These were used for the outside of a scale diorama garage. The parts interlock, so you can extend the shape to fit any project. Easy to cut as well. I used Hatchbox “brick” PLA.…
Wydruk około 3,61 €–4,42 € nettoWstępna wycena jednego wariantu
Boxes - it looks simple - but you better go through it just right! Get it wrong, and your axle will get hung on them! Inspired by the flood of Amazon boxes that happen in my house… Printed in PLA Check out my other obstacles as well!…
Wydruk około 6,55 €–8,00 € nettoWstępna wycena jednego wariantu
The Wave! This one is challenging - you better have good tires and good weight distribution. The “waves” are spaced right about the wheelbase of the smaller crawlers. Your truck will have to pull up both front and rear tires. Printed in…
Wydruk około 10,62 €–12,98 € nettoWstępna wycena jednego wariantu
Simple print to test the sidehill of your mini rc crawler! Print a few of these and put them together in different orientations. Each way creates a new path and challenge. I printed in PLA.
Wydruk około 10,06 €–12,30 € nettoWstępna wycena jednego wariantu
A super easy print to keep your battery away from the gears on your Redcat Ascent. Here is where I installed it: No supports needed. I printed in PLA and it worked fine!
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Body mounts I created to mount a Traxxas TRX4 Sport body onto the Injora carbon fiber chassis. This allows you to use the stock body holes on the Sport body. Unconfirmed the fit with any other body styles. I printed in PETG. However still…
Wydruk około 2,33 €–2,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As the Redcat Ascent 32 was launched, nobody made aftermarket wheels for it - so I created the replacement hex that converts from the Ascent 32 axle up to the standard hex size for 1.0" wheels. I printed in PLA on my Elegoo Neptune 4 Max.…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Quick design to help mount the JConcepts Warlock body to the Enduro Comp Fox chassis. May or may not work with other body designs - but I was asked to share it - so here it is! I printed mine in PETG, and it has been quite strong.
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple wall mount for the EMax Tinyhawk 3 and Tinyhawk Freestyle 2. Easy and quick print. Hangs the drones on the wall with a single screw. We printed in PETG because my son liked the color :)
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tire covers for the rear of the Redcat COE Hauler. I used them to reduce traction and help the truck drift. Printed with the lip-side down. No supports needed. You can also cut the file and use them for the front tires as well. I printed…
Wydruk około 6,36 €–7,77 € nettoWstępna wycena jednego wariantu
I needed a different location to mount my ESC while putting on a custom chassis and moving the battery rewards on my Redcat RDS….so I created this little table that bolts directly on top of the battery mount! Easy! I printed in PLA,…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
I wanted a GREAT looking drift track for my home…but didn't want to pay the crazy prices. I decided I was going to create this curb model in different diameters so I could piece together a track however I wanted! Available in 3ft, 5ft,…
I wanted a ramp that basically ANY RC mini monster truck could backflip from - so I created it! The right side (in the picture) is a constant curve that goes past 90*. This makes backflips EASY. The left side is a steep ramp (partially to…
I designed these skid plates to help protect the Pro-Line Brute body on my Traxxas X-Maxx. Printed from Ninjatek Armadillo TPU, they are very abrasion resistant and strong. *Note: these designs ARE NOT PERFECT. You will need to do the…
Simple magnetic body mount for the Yokomo YD2 vehicles. I specifically made this for the YD2-Z RTR model. You will also need 12mmx3mm magnets, and some 1.5mmx15mm screws to attach it. It is designed for the screw to go through the factory…
I wanted an RC ramp for my Losi Mini-LMT, Traxxas TRX4MT, FMS Smasher, and Redcat Lawless - and I wanted to use some leftover crawler tires to add some fun to it. Two files attached. 1st is for 4.75" crawler tires - and uses the whole…
Super-easy body mounts for the new MST RMX 4 S Pro! The fronts print with the recesses facing up, no supports needed. Rear print upside down and require a small amount of supports under the recess. There are two versions of the rear…
The MST RMX 4 doesn't come with ANY form of rear bumper. I like to have something back there to help me pick the car up. That is where the "...bumper v2" file came in. Large enough to help me get my hand on the chassis - but could also…
Some folks have issues with the Redcat Machete ESC coming loose - so I created this ESC mounting plate. One side has a slight counter-sink to the ESC mount holes. That goes on the bottom with flat-head screws into the ESC. The other side…
You can raise the factory Redcat Gen 9 rock sliders by 10mm to increase clearance - and all you need are these spacers plus some 15-17mm long screws! I printed these using Ninjatek Armadillo TPU for strength. This will require you to trim…
These are Team Associated DC10 body mounts. I made these to fit the Team Associated Nissan 400Z body onto this chassis, but they may be useful for you as well. I had no intention of sharing these, so never took formal pictures. Sorry. I…
To wszystkie aktualnie dostępne wyniki.
