Liczymy pasujące modele…
Scad remix drawer dandle: Distance between the screws: 125mm Screw hole diameter: 8mm Screw head hole diameter: 13mm Material thickness (between screw head and base: 5mm Screw_Countersink_Angle: 90° Handle_Material_Thickness: 10mm Height…
Remixed the the nice model from @javawizard_449936 to a shorter version to get it printed in the bambu lab x1c and with this version you can pull them out and dont have to lift them. (made a version for 15 buildplates, should be enough to…
2x Hotendbox without screw slots 2x Hotendbox with screw slots 4x Hotendbox with screw slots (the lid is always the same)
Laufrolle für Aluminium Profile Nut 8 Nutrolle OD 47mm Laufrolle OD 33,5mm Rollenbreite 5,65mm - 7,7mm - 5,56mm (Gesamt 19mm) Bearings 608 RS ( Link ) printed with iglidur® I180-PF | 750g
Big buildplate holder for wider slots for glas, carbon and PEX/dual sided PEI buildplates: 2x glas (thickness of the buildplate: 3,5mm - slotwidth 4,5mm) 2x carbon (thickness of the buildplate: 2,8mm → slotwidth 3,8mm) 10x PEX/dsPEI…
needed a airtight connection (3D Print exhaust) and this was the best solution
Added some layers to the thin legs of Bambu X1 Carbon Purge Chute Extension from @z3d_ , but dont forget the “cool down” on the heatbed it makes the layerbond much better. For the best results print it standing like @z3d_ describes it in…
Remix of the very nice cow stamp of @losscutmajin_118360 - needed a handle for kids to get rid of the frustration when the tiny fingers made the cookies not perfect (not my frustration - the idea came from a nice young engineer called…
easy explained: its a dual vent adapter for 120mm fans splitter reduction remix from two vents to one (exhausts from two printers to one 100mm duct) slide interface compatible with the blast gates from @ViralDIY_1186560 TPU Gasket for M4…
Based on a remix box from @ BoostinIX https://www.printables.com/model/357932-8020-arduino-motor-shield-wind-sim-box added/removed/changed added 4 holes for GX16 connectors (16mm) added one USB cut out and removed the others added a remix…
Medium buildplate holder for wider slots for glas, carbon, Rubber/PP and PEX/dual sided PEI buildplates: 2x glas/Rubber (thickness of the buildplate: 3,5mm - slotwidth 4,5mm) 2x carbon (thickness of the buildplate: 2,8mm → slotwidth…
70mm x 50mm stackable spacer with three 5mm pins/5,6mm holes
This is the NEW Version of the forkmount I have remixed some days ago. Now you have the possiblity to change the inserts when having your Enduro (15mm axle) or ýour downhill bike with (20mm axle) update: added adapters with a small hole,…
Kärcher vaccum cleaner connection best made in soft TPU, so you are able to connect the different 3D printed nozzles wherever you want. Dimensions 35mm file: long side ID 30mm short side ID 35mm UPDATE: added a slimmer version, pls check…
Rack for cycling pedals. At first I made some versions with different widths but in the end went for one rack which fits from speedplay to big flat pedals. print settings: Infill should be enough with 15-20% (you won t pedal the pedals)…
doubled the size from the Bed Plate Storage Rack from @V3Precision_459757 the print will take some time - don t drink a coffee, just go for sleep.
quick and dirty remix of the Duckyprint Nubsound G3 mount - for the Nobsound NS-15G hint: print it standing like in the stl file, supports are not needed - have it cooled down before removing it, otherwise you could damage the screw…
Liked the model from @HandsomePotato but needed one which fits on my 4040 Extrusions, so removed the drillholes and made them linear. The "handsome" holder has the perfect width to fit onto 4040 extrusions. @STRONGER Version: my first…
you are looking at the old version , which was good but the new one has some upgrades you will possible love (hmm, or lets say its more practical :-)) Remixed the perfect Boost Mount for MTB front axle from @Animalector_245418 and made…
If a velcro is not enough or you need to keep the fan control on one place like me. Quick and fast design of a mounting plate for the Noctua NA-FC1 Fan controller which has room for four NA-FC1 including the possibility to fix the cable…
Abdeckkappen für Bosch Professional Forstnerbohrer 18mm/20mm Bohrungen in verschiedenen Versionen: 20mm normal: Abdeckkappe OD 20,7mm/0,5mm, Zylinder OD 19,6/wall 2mm Gesamthöhe 5mm 20mm thin: Abdeckkappe OD 20,7mm/0,5mm, Zylinder OD…
remixed the cover from @Smacken_263426 and kept the overall size (140mm fan) but reduced the outlet circle to 120mm noctua size - "so a 120mm fan in a 140mm case" works best with the anti-vibration pads from noctua which you got with your…
Parktool Bikestand 1729-TA Mount Front Boost Axle Adaptor 15mm/110mm there are three files with different ID, you have to messure your stand to choose the right one (21,6mm, 21,8mm, 22mm). @print it with the inner side down and use 15%…
Server Rack Spacer for 2HE (5mm, 6.5mm, 9mm, magnet hinge for service doors, spacer)
remixed the nice velcro cable clip from @RCHeliGuy. three versions for different velcros (9mm, 11mm, 12mm) no nose - best for flat surfaces overall a bit smaller still mounts with M5 Version Updates: added small 9mm Velcro incl. 3mm base…
Big buildplate holder for wider slots for glas, carbon and PEX/dual sided PEI buildplates: 4x carbon (thickness of the buildplate: 2,8mm → slotwidth 3,8mm 7x PEX/dsPEI (thickness of the buildplate: 1,9mm -→ slotwidth 2,9
added: cut outs for screws, thermistor spring and a slot for keeping the thermistor grease upright when mounting the hotend. update nov23: added a higher lid 10mm (without hotend nozzle sizes)
Nice rear frame/axle mount for your bike, incl. a chain holder - think its self explaining. update 1: you are now able to use it frontside2front or backside2front - both sides have the M4 insert drills for the chainholder. update 2: made…
Clip for 76mm belts to loop the excessive belt length on your simrig, so keep in mind it is not for fixing your belt to your rig it is useful when you used the normal belt shortener for fixing the belt to the stepper lever. V2: added some…
Bohrlehre für eine Plattenmontage auf einem 4040 Aluminium Profil 10mm Schritte M8 (9mm Bohrung) Länge 250mm
Adaption of the lid from @Chongfun to 5x3 incl. the trim for better closing of the lid
roomy lid (+13mm space) + Empire Fanguard (40mm) for following + box + chamfer: remixed from: https://www.printables.com/model/357932-8020-arduino-motor-shield-wind https://www.thingiverse.com/thing:1908733
Liked the model from @HandsomePotato but needed one which fits on my 4040 Extrusions, so removed the drillholes and made them linear. The "handsome" holder has the perfect width to fit onto 4040 extrusions. Update: I would strongly…
top inserts for the Ruggedized Storage Box from @s3blevins_1546355 height 7,7mm worked perfect with pla
small tool to level your indoor cycling trainer, print it, buy a leveller (or use the one you have) incl. a 12mm rod and you are ready to go, if you only have an 11mm rod you can use the holes for some ruthex inserts to fix the rod in the…
Made a remix from @Nomad965_14654 PTFE Connector which is about 30mm longer and has a second drill hole for better attachment.
Mounting brackets for drawers front panel incl. holes for handles. There are two different versions, one for 9mm and the other for 21mm. BOM: Siebdruckplatte/Screenprinting plate 9mm or 21mm M6/M4S Ruthex inserts (2x M6 and 2x M4S for…
Wallmount for 100mm duct (ID about 104), so you can slide in the duct in and have it fixed with the connection section above (in my case to switch the duct from inside to outside exhaust duct), included are two ugly holes in the table to…
Montageplatten für 40x80 Aluprofil z.B. Rollenmontage von Rollen/Bockrollen (links und rechts Plattengröße 100mm x 80mm x 4mm Rollen Befestigungsmatrix: 44mm x 44mm mit M6 Senkkopfschrauben Plattenmontage am Profil mit M8 Zylinderkopf
shorter (61mm) and asymmetric design remix of @Ced_455576s handle
Aluminium Profil (4080/40120/40160) Bohrlehre für eine zentrale 12mm Bohrung
Corner guard 120mm x 150mm x 30mm for aluminium extrusion/screen printing top plate including: 4mm cut out for a stair nose with the 41mm (a) x 23mm (b) ( https://www.alfer-shop.com/Treppen-Profil-breit-gerillt-gelocht/06452 ) M3…
Wide-flat spacer with multiple mounting options for the old Vision TT Bar with the possibility to mount alternative Armrests on your TT/TRI handlebar. Fittingpurpose only when printed with materials which are not rigid enough to lean onto…
Sliding mounting plate to combine both spool holder/stand from Nobufil and Xanatorium with a lightweight mod of this old single stand remix ( 1 , 2 ) UPDATE July23: added a my remixed PTFE Connector at the front screw ( Remix from…
one tube, one rat, one ratstop in two pieces - you may use only the front part or glue it with the mesh part together (with Prusament PC it was pressfit style). :-) if you want to test the strenght of the rat teeth (and your filament),…
Mounting plate to aligne the nice phoneholder from @RCHeliGuy_95859 on the edge to an 3030 extrusion, you need two Ruthex M5S to mount the phoneholder on the plate, the plate itself has two 8mm holes, so M8, M6(incl. washer), M5 (incl.…
added drillholes for M3 Ruthex inserts (or M3S), its very very narrow to the edge surface so maybe you have to file away a small excesswave. the other parts you will find @Pureshem_1493396 X1C Shelf which is really nice!
Simple wall stand for your reebok step to keep your room tidy and clean. BOM: 1x or 2x threaded rod M8 2x M8 nut 2x M8 washer 2x or 4x Ruthex M8 insert 4x M3 Ruthex inserts for the TPU Basis (not really necessary) optional: foam rubber to…
Remixed bottom sidecover for the bigger 50mm Version S-350-48: (https://www.omc-stepperonline.com/download/S-350-48.pdf) PLUS: because of the narrow wall design some filaments will warp at the end of the legs, so I made a “hide your…
a guide for your or guests feets which makes it impossible to get in contact with the Clark Synthesis - TST when mounted underneath your pedal plate. prepared for the front 4040 extrusion on your pedalextrusions sim-lab PX-1 (M8 screws)…
made a remix from @wayinone from makerworld for a fixed used and in my case to use it outdoors in the snow. "bang it into the snow and tune your ski or board" BOM: 6x M3 inserts 4x M6 inserts 4x M6 screws (i have used 80mm long ones) 6x…
Vertical mount for the Meca Cup 2 Pedals/USB Box to mount it between the pedals. mounting via two M5S Ruthex inserts Extrusion mount holes 8mm to mount with M8/M6(with washer)/M5 (with washer) distance between the mounting holes: 80mm…
Lochstopfen/Abdeckkappe für Bosch Professional Forstnerbohrer 16mm - 4mm tief
A fender to hide the wheels for this extrusion mountin plates: https://www.printables.com/model/352609-rollen-basisplatten-wide-and-narrow-mit-fase-senkk UPDATE: added a second version with more distance to the wheels
Information sign wallmount, easy mounting of the sign with three Ruthex M3S inserts and best 3 M3 flathead screws. Mount has been concepted for 3mm signs.
Swix brushcap (also works with Toko brushes) to keep it clean. (used scanshape ) "wax wisely and race fast" added a template if you want to put some fleece into the cap. @Filament: used PP to keep it lightweight.
This is the final version of a ski mount for transportation purpose or storage, here is a quick overview: multiple piece project, so you can always swap damaged parts and print faults are not wasting too much filament. base and side TPU…
Endcap/cover for Aluminium profile/extrusion 16x120E I-Typ Nut 8 : *** three versions of endcaps with different size of the fixing pin 4,4mm, 4,25mm, 4mm - with the 4mm you could use glue, 4,4mm holds mechanical very good.
This slider is for the old repairstand from parktool PRS-21/22 (dont know if the new one has the same size) to get the possibility to mount bikes with axles. Personally i needed one for 20mm Axles. BOM: Some durable Filament…
just some rigid corner brackets with different versions, you will need some supports for the 8mm and 20mm version
To wszystkie aktualnie dostępne wyniki.
