Liczymy pasujące modele…
While working on creating a stabilization solution for a closed source printer, I decided to use 20x20 based rails but since I didn't want to purchase metal rails, I leveraged a few things to create a construction set. Current pieces…
My wife and I have 4 dogs ... our youngest has started trying to look up on the stove for food and we've discovered our gas stove partially turned on and leaking natural gas. This print is a simple fix since we didn't like the clunky…
When I assembled my 101Hero printer, one of the first modifications I made was to convert to a Bowden extruder. When I saw a Batman spinner that sits on top of the NEMA17 axle, I knew I would want to create some iconic derivatives. What…
This is a remix of the feather-bat and feather-case models to make them taller. The battery box can now hold a 15mm tall battery and the feather case can hold a feather with stacking headers installed (like the ones that came in Adabox…
Installing a stepper dampener on the Y axis of an Ender-3 causes the bed carriage to hit the motor. This can be resolved by moving the endstop 5.25mm in from the stock location. I took the idea for this part from RobJohnC and went back to…
This is a case for the LCD2004 panel printable by the 101Hero. Thanks to RenatoT for the knob and BrantPeery for the base model for the shell. Print Settings Printer: 101Hero Rafts: Doesn't Matter Supports: Yes Resolution: 0.18mm Infill:…
This is a quick remix of SocialBooth's Feather Tray so it would fit boards with stacking headers attached. Will accommodate stacking header pins up to 10mm below the bottom of the PCB. Category: Electronics
High above the desolate surface of Ender-3 sits the ominous sphere known to the Empire as the Deathstar. This man-made moon rotates as your gantry moves up and down providing a mesmerizing view of the Galactic Empire's mighty weapon. As…
The endstop mounts that come with the HE3D K200 work great but because it is cut acrylic, complex shapes are not easy to do. As a result, the mount reduces Z-height by a couple cm. This mount gives that lost space back by moving the…
After purchasing the Power BLough-R kit from Brian Lough ( https://www.tindie.com/products/brianlough/power-blough-r ) I found that there wasn't a case to house it securely. With that in mind, I took part of an afternoon and threw this…
Based on JRad's simple enclosure for the Macchina M2, this remix increases the height of the face, buttons and top to account for a 2mm or 4mm XBee daughter card being installed. Also included is a new inset button so the button should be…
This is a pylon cap for increasing the structural stability of the 101Hero and was designed by Colin Klapka. This is being added here to keep all 101Hero upgrades I used in one place. Print Settings Printer: 101Hero Rafts: Doesn't Matter…
One of the easiest changes to the 101hero is to convert the direct extruder to a Bowden extruder. In doing that, you end up left with a large extruder shell that is more than half empty. This thing contains just the coldend portion of the…
This is a remix of the top arms of Mike-vom-Mar's great headset stand. This model moves the top arms down so they can more easily support the Quest 3's Elite Battery Strap without lifting the arms up on the headset. The stand arms are…
I took the top mount and made some adjustments for a sturdier fit. Inside the notched end is 20mm to prevent the bracket from sliding Two corners of the inner fill are curved so the bracket rotates in and locks. Print two of these to…
This is a remix of a fan shroud and the E3Dv6 carrier created for the 101Hero. Print Settings Printer: 101Hero Rafts: Yes Supports: Yes Resolution: 0.18mm Infill: 20% Notes: Supports to the bed are important. If possible, it would be good…
This is a small clip to mount a Logitech C210 webcam to the top support of the 101Hero. The wide crossbar is meant to hold the support arm of the camera stable so you don't need glue/tape/etc. to keep the webcam in place. Print Settings…
This is a hotend & active cooling carrier design for an E3Dv6 hotend and 2 40mm blowers. The fit of the ducts is very close to exact, so it may take some filing on the carrier to get them to slide into place. Once in place, I would…
Using a radial fan with the original plate required gluing the fan to the plate. This adaptation includes a collar for the outlet of the fan so it can be inserted and removed. It can also be more securely glued it desired. Print Settings…
One of the easiest changes to the 101hero is to convert the direct extruder to a Bowden extruder. In doing that, you end up left with a large extruder shell that is more than half empty. This thing contains just the hotend portion of the…
These mounts allow you to hang the Sanguinololu LCD panel from the top of the 101Hero. Simply attach the mounts to the back of the board. The left hand mount has a cutout for the SDCard reader. Once attached, attach to the top of the…
This is a remix of Xerrako's struts to make a shorter set to be installable under the build plate to remove the chance of the arms striking the struts. Category: 3D Printer Accessories
Created by Xerrako's to make the 101Hero sturdier and less likely to move while in use. Print Settings Printer: 101Hero Rafts: Doesn't Matter Supports: No Resolution: 0.18mm Infill: 20% Notes: Supports shouldn't be needed. Category: 3D…
To wszystkie aktualnie dostępne wyniki.
