Liczymy pasujące modele…
Print flat on the print bed, you will want to look into the setting "Initial layer horizontal expansion" (that is the name in Cura) with a negative value to combat elephant foot, since you need precise sides. The holes can be used to put…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The main parts are FDM printed, while I used SLA to print the dies and the backstop, mainly to get the surface finished I wanted. I printed most parts on a Markforged printer with CFF Kevlar reinforcement, but they would probably work…
A stackable fuse holder for automotive blade fuses that uses nothing more than 3D printed parts, M3 screws, and regular spade connectors. I thought that most fuse holders were way too bulky when I did build a super compact USB charging…
Introduction A while back I designed this other handle for the Einstar 3D Scanner: https://www.printables.com/model/364038-einstar-handle I used the feedback and experiences from that one and designed a new updated model. Of course, it…
A very basic part for my computer. I made two versions, one with a bottom part that keeps it all together, and one with the two sides as separate pieces for faster printing with less material (and fits on smaller bed sizes) Originally…
A maker friend of mine needed an Aspirator for a lab experiment he was conducting, and I did not have one to lend him, so instead, I just designed one and printed it. I have not done any extensive performance testing on it, but it worked…
A simple servo mount, screw your servo to it, screw it to a base, and you are done :) Originally published on YouMagine back in 2016
Marker tower designed for 6mm markers with 10mm outer diameter. I am using these magnets https://www.supermagnete.de/eng/magnet-systems-threaded-studs/neodymium-magnet-system-22mm-black-rubber-coated-with-threaded-stud_GTNG-22 The hole in…
If you want to put it on a slightly curved surface (for example, the back of a monitor/tv), use the thicker foam tape, and just attach a strip on each edge of the back.
Fits under any desk or shelf that does not have a raised edge or support beam in front of the holder. Mounts with countersunk screws. Sides are identical, so just print two and mirror one of them in the slicer. Originally published on…
A printable flash stand/foot with a hot shoe mount. Also incorporates a hole to accommodate the locking pin on Nikon and Canon flash units. A friend of mine that on the train realized that he had forgotten his flash stand asked if I had…
A simple headset wall hanger made to print quickly and to support large nozzle sizes. (the print on the pictures was made with a 1.2mm nozzle) I did make them for a pair of SteelSeries Siberia that I had back then, but it works with most…
This grip works great, but if you are new here, I recommend that you instead print my MK2 grip instead: https://www.printables.com/model/388834-einstar-handle-mk2 This is my attempt at making an ergonomic grip for the Einstar, it is…
The small recessed holes are for gluing in printed pictures of the different screw heads to give a visual representation if you like.
A set of mounts that fits 2020 v-slot profiles, with 0, 22.5, 45, 67.5, or 90-degree angles for the Sonic Pad. I also have a version that fits 2040 profiles Print without support on the bed with the large flat side down. There is a single…
Made this to show a friend that these can be printed nicely without support, so instead of making it round like most designs, I made it 10-sided to make all bridges straight instead of arced, and added a slight taper to the top edge.…
If you print it with (m)SLA, it will be a smoother fit, but the layer lines from FDM actually helps retain it a bit better.
I originally made this for a LARP event that needed a bunch of very large hourglasses, and we made those out of clear 2L PET bottles and very fine, free-flowing, sand. We used the smallest version at 3.2mm to get a reasonably long…
We use this to wall mount tooling for our ZX45 mill at Stockholm Makerspace . You can use this for any kind of 30-taper tooling, and the bottom is open to accommodate different styles of pull studs if that is something you do have on your…
Storage rack for six Print Cores that can be mounted with the original screws on the Ultimaker 3. Print laying down on its back. Originally published on YouMagine back in 2020
Some wheels and clips from the lower basket on our dishwasher broke and went missing, so I designed these replacement parts, they are fully compatible with the original wheels and clips but a bit more robust to make them suitable for FDM…
The kWeld from Keenlab is an excellent battery spot welder, especially as a desktop unit with the accompanying ultracapacitor bank kCap, the power supply module kSupply, and a compatible server power supply. But as I couldn't find any…
The lower part of this print is meant to grip on tightly onto a flat 2x0.75mm² lamp cable with an outer dimension of 3.5x7mm, and then you use the upper part to twist/adjust the cable until your lamp hangs at your preferred angle. Here in…
Water cooling jacket for brushless electric motors with 107mm outer case diameter and at minimum around 150mm case length. (130mm needs to be smooth to accommodate the o-rings) It has 3 split rings inside that force the water to spread…
This filament guide screws to your printer as a replacement for the cable cover, and you will never lose or forget it again! It will ONLY fit the regular Ultimaker 3, not the extended version, because of the different placements of the…
The plastic hook on my Ninebot ES4 had cracked and broken off a few times too many, so I designed and printed a replacement. You will need two socket head screws M4x16mm. My personal hook is printed in 17-4PH Stainless Steel on a…
Are you tired of rummaging through your toolbox or workshop, trying to find the right size collet for your milling or turning projects? This wall-mounted ER20 collet holder is the perfect solution. This compact and durable holder can hold…
Sun hood designed for the Blackmagic Pocket Cinema 4K with the Smallrig 2343 Universal SSD Holder mounted on top, using one of the side ¼" threads on the Smallrig holder as the mounting point. I designed this using a 3D Scan of the back…
Adapter set to use the Bofu ES16xx roller motors sold by M.nu: https://www.m.nu/z-wave/rullgardin-markis with some roller blinds from Jysk that has a larger inner diameter than what the adapters sold by M.nu permits. Originally published…
We are using the Baofeng BF-R5 portable two-way radio as communication in our Scout group Träkvista Sjöscoutkår , and I made a wall-hanging storage/charging station that holds 12 radios and two multi-output USB chargers. That meant that I…
Simple holder to fit a Logitech K400 keyboard under your IKEA Fjällbo coffee table, or anywhere you need it to go under an edge of up to 25mm. Sides are identical, so just print two and mirror one of them in the slicer. Originally…
A set of mounts that fits 2040 v-slot profiles, with 0, 22.5, 45, 67.5, or 90-degree angles for the Sonic Pad. Print without support on the bed like they are oriented in the files. There is a single bridge layer in the vertical screw…
Two of the change gears in the thread-cutting / feed gearbox on our Emco Maximat Super11 lathe at Stockholm Makerspace had broken teeth after a crash, and spares were very hard to get, so I designed and printed these change gears. They…
I needed a nice-looking marker holder for my whiteboard, so I made this one to hold three markers. I printed it with an 0.8mm nozzle and 0.4mm layers, which makes it a super quick print, and it works just great. Attaches with double-sided…
Got requested to adapt my previous design for 34mm roller blinds to fit the newer style of 25mm roller blinds from Jysk. This set is untested since the requester never replied after these were done, so if you print these, please provide…
Fits any standard medical hose with 22mm connectors, often used on CPAP machines and respirators, but has also found popularity in 3D printers for remote print cooling lately. Designed to comply with the ISO5356-1 standard “Anaesthetic…
A printable model of Högalidskyrkan, one of the most prominent churches in Stockholm, Sweden, built in 1923 (so it just celebrated a hundred years). It was designed by Ivar Tengbom in national romantic architectural style. This model has…
I made this microphone as a last-night solution to be able to amplify two violins relatively cheaply wireless at a friend's wedding, so I designed it to use my AKG PT80 Transmitter that normally uses a small condenser lavalier microphone…
The wireless adapter slots into the base from the back, and the Osmo pocket slots in from the top. There is an opening for the USB charging cable to be connected from the front. The model is designed to print without any support with any…
I thought that the ones I could find were a bit too rough, so I designed a slimmer and nicer version for our 3d printing room at Stockholm Makerspace Originally published on YouMagine back in 2016
Classic Silhouette tool form factor (pre-Cameo4). We have a Silhouette Cameo 2 at Stockholm Makerspace , which I designed for. You will need an M3 threaded insert, an M3x12 screw, and a Pilot G2 pen cartridge.
A spare part for my friend's Kawasaki JS550 that fits the original lid, tube, and chain. Compared to the original part, this one has a slightly angled tube to make the fuel hose bend to be less extreme, at the request of my friend. As…
I 3D-scanned my digital parking timer with a Shining3D Autoscan Inspec. I then created a new windshield mount in Fusion 360 that doesn't fall off easily as the original one does (the original has two tiny tape pieces on curved surfaces).…
Started out as a joke in the office. I recommend printing the mold in a resin printer to get smooth surfaces and using M3 screws and nuts to close the mold. All the features have good amounts of draft angle, but you should still use some…
Nothing much to say, print it out and use screws to fix it in place. Requires some supports or a printer that is an ace at bridging. Originally uploaded to YouMagine back in 2016
I included versions both with the original and the thinner base. Use the peg from the original model.
We are using the Baofeng BF-R5 portable two-way radio as communication in our Scout group Träkvista Sjöscoutkår , and I made these upgraded pocket clips. The problem with the original pocket clips is that they don't have a good way to fix…
Our 2.2kW air-cooled square spindle from "Rattmmotor" on one of the CNC machines at Stockholm Makerspace had lots of problems with running super hot on lower speeds, since the small impeller-style fan is running directly of the spindle…
A friend of mine owns a Scania 143 from 1988 and needed to get a replacement key. The replacement key came with a boring 28.5mm round head instead of the oval Scania style, so I modeled up this cover to fix that. Prints upside-down and is…
A fun trivia is that this most likely is the first model ever published with the Ultimaker print cores or the Ultimaker 3 in mind. I was part of the beta tester group and published these files on YouMagine just minutes after the product…
Uses standard M8x10mm screws as counterweights, I used the low profile variant that weighs in at around 7 grams each for a variable weight of 49 grams. The prints, two threaded M5 inserts, and two M5x25mm screws add another 31 grams for a…
I made this for the textile workshop at Stockholm Makerspace , to get a better organization of the large (5000m) cones of threads for the overlock/serger sewing machines.
This method of aiming the links worked great when doing it at night, very quickly got solid 300 megabit links over shorter distances without messing around looking at the signal strength measurements, etc. The wireless links I got are…
These feet use 50 durometer, 30 and 40mm half-spheres made out of the visco-elastic urethane rubber "Sorbothane" to reduce the amount of conducted vibrations by a lot, without the problems of self-induced oscillation of more springy…
If you instead of laser cutting or jig sawing my original toy horse design, want to print it on your 3D printer, here is a printable version. It fits on a 300x300mm print bed (minimum is about 295x295) if you rotate it right, and it uses…
We used this holder for our CNC Router at Stockholm Makerspace , to hold all the different collet sizes we use. It can be used either as a desk stand or wall mounted with two screws. The AMB / Kress Collets are very hard to remove from…
We have a modded Universal Laser ULS25A at Stockholm Makerspace (running a Ruida controller and Lightburn as control software), and we wanted to be able to install air assist and use standard 18mm focus lenses. We got them machined for…
A print head top piece that fits standard collets 4mm bowden tubing.
Since the axes on both the Ultimaker 2 and the Ultimaker Original (Plus) are 18mm apart and use the same size rods, they can use the same printhead, but since the axes are the other way around the printhead gets turned 90 degrees, this…
For an event I was involved in, we needed about 15 toy horses made quickly and cheaply, so I created this design that uses one or two sheets of laser-cut plywood. If you don't have a laser cutter at hand, I've also included a template you…
In the welding workshop at Stockholm Makerspace , which is not very spacious, we have 3 different machines that need a ground cable with a ground clamp to your workpiece (one MIG/MAG welder, one TIG/MMA welder and one Plasma Cutter). To…
Fits the Anders Olsson torque wrench for nozzle changing https://www.youmagine.com/designs/nozzle-torque-wrench The holes are spaced so they fit all metal "pegboards" with 12mm hole spacing, here in Sweden that is all the ones sold by…
Designed and printed to help out some friends who were on follow-spot duty for their student amateur theatre group ("spex") and had a hard time aiming on the right spot before their spotlights were turned on. The rail should be compatible…
You need two 4mm drill bushings with 7mm diameter to press into the 7mm holes, 5pcs of M3 heat-set threaded inserts, and 5pcs of M3x8 screws, and a 30mm wide steel rule. The holes will end up at 49mm below the top of the drawer with a…
Some of the adjustment knobs broke down on our “Diana” adjustable dressmaker's mannequin in the textile workshop at Stockholm Makerspace , so we designed and printed some replacements. The design needs to be printed with some supports, to…
Why the nickname? Just made it up so people would have a name to refer to it with... xD It is intended to print it with the nose down towards the build plate and the standard version prints without any need for support. The alternative…
This is the latest revision of my mount to be able to upgrade a UMO+ with the UM2 Drivetrain Extrusion upgrade kit to be able to get the same feeder and printhead as the latest and greatest UM2+ Guide on how to do this process can be…
A quick-release tripod mount for the Samsung Galaxy Note 4 on Joby Gorillapod mini original or the magnetic one, the phone snaps on and off very easily from the mount when you want it to, but sits very secure otherwise. Print the mount…
Adapter to fit various large thread cones (4500m, 5000m, 9000m, 10000m etc) to your thread stand or sewing machine, as long as it has a spool pin long enough to support it, and that pin is smaller than ~6mm diameter, it will fit. I…
Rubies are a 3DPrinters best friend... ;) First, print the ring and optionally paint it. Then print the box, cut the foam to size and spray glue the velvet around it. Cut a slot in it with a knife, put it in the box, and then put the ring…
A holder / frame / case / mount for the Paneldue 7i I designed it to sit on top of a Rittal AE 1032.500 cabinet that could fit both a Duet 2 WiFi, a Duex 5 board, and the Expansion Breakout Board, or a Duet and a Power Supply
Pic 3 is of the remote in question, mine is for an Infrared Patio Heater, but there are probably loads of other products that use the same infrared remote. It fits either of the IKEA Hol tables. You need a little bit of support to print…
You will need an M4 heat-set threaded insert (with or without flange), an M4xX screw, a GN352 25x20xM6 rubber stopper, and an M6 screw to fasten the bumper. Kinda designed for my specific circumstance, but you can adjust this to fit your…
I don't expect that a lot of people will have use of this exactly as-is, at least you likely want to use a more modern controller. I have therefore attached a STEP file of the full assembly so you can modify it to your liking. I used the…
Quick release for a banner ornament to fit a pole with a 25mm inner diameter and 28mm outer diameter and an ornament that can be glued into a 10mm hole. I made this for my scout group Träkvista Sjöscoutkår , and it is made to fit the…
Since we have about 7 Ultimaker 2's at Stockholm Makerspace, but only one Ultimaker Original Plus, we wanted to convert it to have the same menu system and LCD, to make it easier to use.
The HP6622A is a high-quality power supply, but it is also very bulky, so you don't want it on your desk, and this is why I created this breakout box. The box is made to be 3D printed, and the front panel is made to be laser cut and…
This is a wall mount, complete with a working locking mechanism, for the accessories to the Einscan Pro 3D Scanner series. Tested with both the Color Pack (that fits the EinScan-Pro & EinScan-Pro+, EinScan Pro 2X & EinScan Pro 2X Plus)…
It is a press fit onto the thumb nut that the PSA-1 table screw mount is supplied with.
If your electronics project does contain large capacitors, they might have uninsulated terminals that are easy to touch accidentally while working in the electronics cabinet. This cap gives the terminals some protection that is not as…
To wszystkie aktualnie dostępne wyniki.
