Creality Sonic Pad 2020 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of brackets that fits 2020 v-slot profiles, with 0, 22.5, 45, 67.5, or 90-degree angles for the Sonic Pad.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 329
- Wydruki
- 3
- Wyświetlenia
- 2099
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A set of mounts that fits 2020 v-slot profiles, with 0, 22.5, 45, 67.5, or 90-degree angles for the Sonic Pad. I also have a version that fits 2040 profiles
Print without support on the bed with the large flat side down.
There is a single bridge layer in the vertical screw holes to improve the bottom quality, which is easily cleaned up. I use a crosshead screwdriver which I press in from the larger side and turn around once to get a clean hole.
The 0-degree mount is what I use on the CR-30 belt printer since the top profile is already angled 45 degrees.
Hardware needed
- 4pcs M3x12 screws to fasten the Sonic Pad to these mounts,
- 4pcs M3x8 screws
- 4pcs T-nuts