Liczymy pasujące modele…
This is a display stand for any media in Switch game cases, DS and 3DS game cases, DVD cases (PS2, GameCube, Xbox, Xbox 360, movies, etc.), CD jewel cases (single CD PS1, Dreamcast, Turbografx 16/PC Engine, etc.), Bluray cases (PS3, Xbox…
This is a model I made of a Dreamcast controller display stand. Due to the unique position of the cable, I designed the stand to conceal it. As with all of my models, I reduced the amount of filament needed for printing by as much as I…
This is a universal console display stand that uses the least amount of filament possible but remains sturdy. It is 5 pieces and needs easy assembly that takes 30 seconds. All pieces print flat. Tiny supports are needed for the front…
This is not a remix of the design but are protective plates (6 smaller ones, 3 larger ones that match the same size as the segments on the light ring) that covers the light ring and the part of the camera cases that are most susceptible…
This tiny cart display stand is the smallest you will find. I made sure there is just enough gap between the back rest and the lip for most cartridges. The non-card type cartridges look like they are floating due to the tiny size. The…
This is a wide-base version of my original Nintendo 64 controller display stand. It will provide more stability. The other stand will hold the controller no problem but should be primarily used for controllers that will remain on display.…
This is a display stand for your PS2 Slim console and a DualShock controller. Line up the left side of the base with the left side of the PS2 Slim and that will center the controller in front of it. The controller stand has a tight grip…
A game display for games in double jewel cases (PS1), long jewel boxes (Sega Saturn), long boxes (PS1, 3DO) and boxes (Game Boy, GBA, NES, Atari, Intellivision, Genesis - NOT clamshell cases). This does not hold SNES or Nintendo 64 boxes.…
This is a display stand for your PS2 Fat console and a DualShock controller. The controller stand has a tight grip so it takes a bit to get the controller in but once it's in the controller won't be able to shift in any direction. This…
Universal controller stands (3 sizes) that have been tested with the SNES, NES, Genesis 6 button, Genesis 3 button (download and print the tall version), NES Classic, SNES Classic, many 8bitdo and Retro-bit controllers, and even the 3DO.…
I have created a wide-base version of this display stand for those concerned with stability. The original will support a controller but I'd recomend using it more for controllers that will remain on display. Wide-base version:…
I needed a way to display my prized Fallout Vault 111 shoes autographed by the entire time at Bethesda. I took the nice and attractive original models and split the stands in half the long way and removed more filament by adding equally…
I wanted a compact SNES/SFC controller display stand/holder for my custom wireless SNES so I designed one that would hold both controllers but figured a single version would be desirable, too. They can be used to store and/or display your…
This is a small Genesis/Mega Drive/Sega Master System game clamshell case display stand. I had trouble finding one so I set out to design one that uses the least amount of filament and time. You won't find a smaller one. It only has a lip…
This display stand was designed specifically for Nintendo 64 (N64) and Super Nintendo (SNES) game boxes. I design all of my mounts to use the least amount of filament while still maintaining structural integrity. A side benefit of this is…
None of my other display stand models could accommodate a Playstation DualShock controller so I designed one that will fit DualShock 1-3 controllers. As per all of my other models, I used as little filament as possible while still…
I designed this holder so that you could keep your C245 and C210 tips (for my Yihua 982D SE but any soldering iron that uses those containers/tips will be fine) in the containers which will help them last. I decided to do 2 rows of 6…
I decided to remix tinfoilguy's great GameCube Wavebird stand so that I could shorten it, significantly reduce the amount of filament needed in the supports and base, and removed the logo (it's more my style). No supports needed. I used…
I mostly design display stands for retro game console controllers, games, and consoles like the SNES, NES, Genesis, etc. so I needed a way to organize the controller's cable to make the display more clean. This is what I came up with. It…
I designed a simple, minimal display stand for a Switch (1) Pro controller. It was initially designed for a Switch dock and controller combo display stand (coming soon) but I figured a standalone stand for the controller would be useful.…
tl;dr - tilt your Dremel Multi Vise without the need for the desk/table clamp using these stands. Replacement vise pads with angles instead of just horizontal and vertical grooves are now available: In my opinion, the Dremel Multi Vise is…
tl;dr - Dremel Multi Vise pads that add angles which are great for clamping in PCBs and soldering electronics without needing the desk/table clamp. UPDATE: I included the .3mf file that prevents supports in the grooves to make it easier…
This is a ruler model that was modified to make it a flush-end ruler - the measurement starts right at the edge of the ruler rather than there being a gap from the edge to the first measurement line. I recommend using a lighter color for…
I needed a nice, low profile display stand for my NEOGEO Pocket Color cartridges so I designed 4 and 6 cart capacity display stands. There will be many more sizes to come and are being designed. NO supports Any filament will do Default…
This is a 3D model of a Switch dock & controller display stand. I made sure to keep the back panel on the dock funtional so you don't have to take the dock off the display stand. There is a small gap between the controller and the dock to…
This is a simple display stand (2 variants) for displaying your GameCube's wired controller. Need a display stand for your GameCube Wavebird controller? Check out my model with included AA battery storage so you don't have to worry about…
I needed a simple solder wire spool holder that didn't consume much filament so I designed this one. It can hold any spool 3.5cm wide or less. I added a tray so that if I need to move the solder wire closer, it can bring along my liquid…
A display stand for NEOGEO AES's massive cartridge cases and cartridges. It can also hold an Atari Lynx model 1. Supports: NO Print time: 50 minutes Filament: 13g PLA+ Settings: Default (you can lessen the infill a bit if you'd like to…
I don't like to keep batteries in my electronics, especially harder to replace electronics. So I designed a GameCube Wavebird display stand with built-in battery storage. The batteries simply slide into their compartments for safe…
NO HARDWARE REQUIRED. Simply slide in the filter and fan and snap on the lid. UPDATE: the case and lid have been completely redesigned for a better seal and tighter fit and a fan grill has been added. The gap between the dividers in the…
Designed for the Retro-Bit Sega Saturn Pro controller but can display many other controllers. After testing the Retro-Bit Sega Saturn Pro controller on my other stands, I noticed the thumbsticks got in the way so I designed this one to…
I designed a simple Sega Dreamcast VMU (Visual Memory Unit)/memory card display stand. Show off your collection of Dreamcast VMUs by using these stands. One variant has less material with the base being less visible compared to the second…
Fractal released the model files for its North Pi Raspberry Pi case which is simply awesome! Instead of the solid side panel that comes with the files, I wanted to add a fan and also install a common cathode RGB LED for a case light that…
To wszystkie aktualnie dostępne wyniki.
