Liczymy pasujące modele…
This is a solid 1/10 scale toolbox with your choice of SnapOn or Mastercraft brand on it. Simple to print, no supports. Print it on its back, with the drawers and text facing up. You can request your own brand or text on it in the…
Wydruk około 2,90 €–3,54 € nettoWstępna wycena jednego wariantu
These are a copy of the MaxTrax MKII traction boards, for 1/10 scale crawlers. 145mm long X 42.5mm large X 6mm high. Comments and suggestions are welcome ! * UPDATE : I uploaded V2 which has the little traction losanges 0.28mm higher for…
Experiment with printing orientation, it will probably require slow print speeds. I printed this at 50mm/s full blast on glass with the handle standing up with a brim, the shaft on the side with supports for the tip and the blade flat…
* UPDATE: I made V2 with looser tolerances, V1 was a bit tight and needed too much sanding to fit. * UPDATE2: V3 further enhances strenght, more space for the foot bolt too. Length : 127mm Base : 17mm X 17mm Should be pretty perfect scale…
This is Erdinger's bucket remixed for the Huina Excavator (1550 / 550 / 580) Weights less than the metal bucket which is a nice bonus. Is plenty strong even for the servo-screw modified rigs. Sand Bucket now available (larger, no teeth)…
This is a scale camping stove for your scale crawler or scale garage/tent/whatever. This was requested from a friend to put on his folding table when he does RC expos. Pots and utensils are already available here in Thingiverse so will…
* UPDATE I just printed this and realized it's gonna be pretty impossible to print on most printers, the parts are just too thin. My 0.5mm nozzle didn't like that at all and left me with a paper thin axe head that broke as soon as i…
Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…
Some users on Reddit requested a FICSIT logo keychain, so i made one in Fusion 360 by tracing over a picture. The layers are made to match a 0.2mm layer height, or a number you can divide it by (0.1mm, 0.05mm) Print instructions Category:…
This is a DIY starter kit, you NEED a base model Kidztech 1/6 Yamaha and you WILL have to cut parts of it and add hobby grade electronics for this to work at all ! I can help for difficult parts, just ask in the comments APRIL 2019 UPDATE…
This is a blade/plow for my 3D printed Huina Undercarriage Needs a N20 geared motor with M4x55 thread, about 200 rpm for best torque Requires my complete Undercarriage, will not fit the stock one !…
Huina 550 / 1550 Undercarriage Spring tensioner Bearing rollers More ground clearance under the center section (about 30mm instead of 8mm stock) Fits stock Huina track gearboxes (a little plastic snipping required only) Fits stock Huina…
Spring-loaded coupler compatible with the Huina 550 / 1550 or 580 V5 has more clearance added for the bucket, lock and bolts parts. Shouldn't need much filing/sanding. Also added a bevel to make hooking a bucket easier. If V4 worked fine…
Fishing Rod Finger Rest Made for 22mm diameter rod, can be scaled in your slicer Front / Middle / Rear are straight Slanted is slanted to the side (duh), mirror it for the other side Print instructions Category: Sport & Outdoors
"Working man" version of the Tamiya Tundra chrome roll bar. Goes well with my Dropped Bed : https://www.thingiverse.com/thing:2990191 (But not necessary) Uploaded V5 with a small section i forgot to fillet. Leaving V4 there in case you…
Huina 1550 Progressive Link Thumb Your choice of : Short : Use without a quick coupler or for a shorter thumb Long : Use with the quick coupler Not compatible with stock square drive Not compatible with stock remote Not compatible with…
Cabin Bars / Grill / Protector for Huina 1550 Either print in 8 parts (print_7 and print_1) or the complete thing. Glue together the 8 parts then double-side sticky tape the grill to the cabin. V2 fixes a tolerance issue around the bottom…
Bucket push rods for your Huina 1550 This allows more angle of the bucket if used in addition to my other mod here : https://www.thingiverse.com/thing:3723652 Print one of each part except (2x) horizontal_v1 The cylinder_spacer is made to…
Huina 1550 excavator "5 finger" rake. REQUIRES my quick coupler OR the screw-cylinder mod. There is no square hole in this to drive it from the stock bucket motor ! Requires (1x) M4x45 bolt and nut to make the front attachment pins. The…
This is a scale lever load binder. The mechanism uses M2.5 bolts and nuts. I will probably design some hooks to go with it later. (Hooks now available !) The plan is to use these to attach my dozer to my trailer (available for printing…
Huina Excavator Electric Coupler * Use the 580_ labeled files for the 580 / 1580 v1 v2 v3 v4 UPDATE Someone made a printable lead screw version for use with "D-shaft" N20 motors. "Electric_LEAD_Lock.stl" "LEAD_Screw.stl" ! Thanks to m.…
This is what a Team Associated GT2 32P 64T spur gear would look like if it existed. I ran a 56T (ASC7957) but needed a bigger one so i made one using Fusion 360. This is HALF of it, print it twice and then use the 3 holes to screw some M3…
Here is my first concept of a "quick coupler" for my new Huina 1550 :D This is for a stock Huina without mods ! For the moment, it is a manual coupler, meaning you have to remove 1 bolt to detach the bucket. You can make yourself a 3mm…
Simple (side / rear) window (mesh / grill / armor) for your Proline Wrangler Rubicon 3336-00. Use 4x M2.5 screws on the corners of each side or whatever floats your boat ! The recessed "tube-shaped area" or whatever you call that(please…
The sprocket mod is great, if you've got plastic tracks... The metal tracks don't have the center bands so they fall into the gaps and get stuck. This mod of the mod adds a thin disk at the center to prevent that. Print in PETG or Nylon…
This is a Mavic Pro Gimbal Anti-Drop Bracket. It is located on the rear of the Gimbal Dampening Board and it prevent the camera from flopping around too much. This is NOT the thing you put on your camera for transport that holds it still,…
This is a remix of the honcho mirrors with the bolt hole filled up for installation with double-sided tape. The hole was making the mirrors brittle when used without a screw in it so i filled the hole and printed them in PETG for better…
UPDATE May 2019 I revisited this part using my new Fusion360 skills. See V2, V3 and V4, see what you prefer. *V4 should be easier to print, but if your printer's supports/bridging capabilities are good, you might have success with V2 and…
Gmade 5-Bolts Beadlock Spacers These are spacers you can bolt between the Hex Hub and Wheel to get more offset. 2, 3 and 4mm spacers published, if you need a particular size i can custom make it for you but be aware you will need longer…
This is a printable version of the alum. 7-degree C-Hub that Gmade sells as an upgrade I have made a 13 degrees version too now, since 7 is not alot.. V2 Files are now corrected and should be fine to print. Tolerances around the outer…
These are 4 pieces that go under and over your body to prevent tearing around the body post holes. UPDATE V1 was a bit tight in the holes, the front upper needed sanding and the rear lower needed washers so V2 files fix all this. Should…
This is a stock replacement bulkhead for the KidzTech Yamaha Sr Viper 1:6 scale snowmobile. I have made the A-arms mounting points beefier (my factory bulkhead broke there). Print it standing up, with supports everywhere or experiment…
This will use the top 2 bolts from my tunnel extension to fix the rack, hiding the screws at the same time (bonus!) and i've made a small clip that you can attach an elastic hair band on to make scale straps that will lock in place…
To wszystkie aktualnie dostępne wyniki.
