Liczymy pasujące modele…
This is a design for a metric watertight arcrylic cylinder (90/84 mm) which fits the Cyclops R/C Submarine https://www.thingiverse.com/thing:4560120 by Robert Cook. Modifications Additionaly to the two O-Rings on each cap it is possible…
Always the right length! Compared to a common bending tool this adjustable one can be set to the wanted length. It can form long wires for breadboard use as well. Even diagonal connections with unique lengths are no problem. A paper about…
These brackets can be used to assemble constructions made of 20x20 aluminium profile which is also used for the mendelmax frame. At the moment there are three different versions (with or without guidance). So either 90° degree…
Support Ring for Amateur-Radio antenna poles. Our working title was "UFO-Dish". It's purpose is to fix and stabilize the fiberglass tower during use. We tested serveral copys and use them during fieldday-events. There're versions with…
This is a DIY Project for a Metal Detector. The diameter of the coils are 254mm (10") and 127mm (5"). When the coil is inserted you can use silicone to fix it and create protection against environmental effects (water,..). There is a hole…
This is an adjustable coil for a mediumwave DIY detector-radio. For most of the most popular stations in Europe you'll need about 30 turns which gives an impedance of 50 - 180 uH. Frequency range is about between 550kHz and 1100kHz. If…
This is a housing for the common "off the shelf" USB to serial (FT232RL) FTDI Adapter. It was desiged to be used with the "MaXYposi CNC plotter" but will work for other projects too. A cover (e.g. made of arcylic glas or PCB leftovers)…
This is a centerpiece to build an dipol with symetrical feed line @ 450 Ohms (like CQ 553 flex wire). I recommend to use the new version (NG) with the improved and strengthened relief. It is still designed for the CQ 553 flex wire but may…
This is a small project to turn a "dummy-camera" into a working ESP32-CAM. There is also an article on the website of the german MAKE-Magazine: https://www.heise.de/ratgeber/ESP32-Update-fuer-einen-Kamera-Dummy-4945742.html 01.12.2020…
End piece for the Mendelmax 20mm x 20mm aluminium profile. Reduces the risk of injury and gives a pretty look. Category: 3D Printer Accessories
Old school detector radio technology meets 21st century 3d-printing. This is a simple to build and use detector radio for the mediumwave band. And yes - it runs without batteries (by only using the transmitted radio energy). We developed…
This is a laser cradle for the FabScan and FabScanPI. It fits to a SG90 Servo and can be used with a 9mm diameter laser unit. It was designed for the FabScanPI Sandwich Box ( http://www.thingiverse.com/thing:1604281 ) but can also be used…
This mounting reduces time for the upgrade, keeps the D1 board in place and ensures an adequate airflow to the sensor. Just print the mounting (PLA, 0,2mm layers and 23% infill will do just fine) and fix the ESP-Board with two 2 x 5 mm…
This is a very compact modular battery pack which fits into a 32mm plastic (electro installation) pipe. It is devided into segments which can be added to a pack of 4, 6, 8... or even more AA-batteries. It is great for building…
This Thing can be used to install a servo for adding an opto probe to your printer. http://www.thingiverse.com/thing:263180 Category: 3D Printer Parts
This ia a box for the GM328A Component Tester. It is possible to use a 9V block battery or external power via connector. The Zero-Force-Socket must be put onto two extensions to fit into the front plate. The backblane must be made out…
This thing protects your lens during transport and storage. There's now also a version with leashing-hole - if you want to stay the cap with the camera you can now attach it with a string. Category: Electronics
This is an adjustable holder for an opto endstop - not only for z-axis! No matter if you use it as an upgrad or for an new printer - you'll love it. And - it can be build within 60 minutes. Post-Printing Parts list Parts to be printed: *…
Improved design to avoid turning on the 8mm shaft. Post-Printing Parts to be printed: 1x Holder Additional parts (Vitamins): 2x nut M3 2x nut M3 (Nyloc) 2x screw M3 x 20mm 2x screw M3 x 16mm 6x washer M3 1x Opto endstop with TCST2103…
This is a alternative box for the FabScanPi (2016 - ) using the latest hardware including raspi 3, raspicam V2 (8MP) and FabScanPi-HAT. You can find all details about the FabScanPi on the http://fabscan.org Website. This thing is called…
Keeps your frequently used tape and solder spools organized and stored within touching distance. Store and remove it with one hand - in no time! Assembly: Print (PLA, 0,2mm layers, 23% infill): Tape Holder S (1x) Tape Holder S Arm (2x)…
This is a adjustable camera holder for the 3D Scanner FabScanPi (Model 2016 - ) The standard camera is the RaspberryPi Cam V1.x or V2.x You can adjust the x- and y-Axis (about +/- 1 cm) and you can correct the angle by adjusting the three…
This thing will help you transporting your Mendelmax printer from A to B. Instructions Print the following parts: 2x HandleSide4MendelMax 1x Handgrip4MendelMax Vitamins (to buy): 2x screw M5 x 20 2x screw M5 x 10 2x nut M5 (Nyloc) 2x…
This is vertical x-axis for the MendelMax 1.5 (or any printer using the same rod distances). It is designed to host the 3-color Diamond Hotend ( http://www.thingiverse.com/thing:720520 ) . There is also an provision for adding a SP90…
Microswitch-endstop mounting for 8mm shafts. Beause of the slotted hole design you can use different types of microwitch like MX-90, Marquardt MAR 1050,... Instructions Parts to be printed: Holder - please select either the horizontal or…
Opto-endstop mounting for 8mm shafts. Instructions Parts to be printed: 1x Holder Additional parts (Vitamins): 1x nut M3 2x nut M3 (Nyloc) 1x screw M3 x 10mm 2x screw M3 x 16mm 2x washer M3 1x Opto endstop with TCST2103 (standard) type…
This is a laser cradle fo the opensource scanner project Fabscan Pi Cube. Depending on the diameter of the used laser module there are three versions (8mm, 9mm and 12mm diameter). This thing makes the needed adjustments simple, easy and…
By using this solution one motor for the Z-axis can be replaced by two 32 teeth T2.5 pulleys and a 950mm T2.5 belt. This modification offers several benefits like: less weight less wiring less noise reduced costs Z-axis can be moved by…
This thing should help you to fix your Megatronics 2.0 board on your MendelMax printer. Easy, stable and dependable mounting. Update: This version has several 3mm holes where you can create a pull relief for the cables by using small…
This is a very compact Z-Probe assembly with opto-barrier. It is taylored for my vertical x-axis with the multicolor diamond nozzle ( http://www.thingiverse.com/thing:1415013 ). But it can be fitted on other carriages as well. It will be…
This is a cheap way to build another charging station for your Moto 360 watch. Just print top and bottom part. Buy QI-charging kit WCTX-5. It is available eg. at POLLIN.DE:…
This is a mounting bracket to fix the SainSmart Megatronics LCD12864 onto Mendel style printers Fits on: Mendel-Style printer (M8 threaded-rod frame) Mendelmax printer others... Instructions Mendel Print the three parts Holder (for…
Tiny but helpful thing which distributes the tension (which is caused by the tension screw) on the whole cross sectional area of the belt. So the belt is not only strained on the very little spot where the screw is placed. Category: 3D…
This thing should help you to fix your Megatronics 2.0 board on your printer. Mendel: It can be fixed with three standard clamps (from the mendel files) and M3 screws. A standard 40mm fan (same as for the hotend) or 80mm fan can be…
die dice Instructions Just a simple die. I made it to get familar with blender. This will be one of the first things to be printed, when my orca printer is finished! Category: Dice
To wszystkie aktualnie dostępne wyniki.
