Liczymy pasujące modele…
A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…
Probably the most popular filament sample on Printables comes with a set of storage boxes in various sizes, 100% printable! I designed the box so that you don't need any additional parts, no screws, no magnets. There are two different…
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the printbed. Click here for a smaller version of this stand! If you like check out my other designs too!
Before you read any further, take a look at the new version of this puzzle: printables.com/model/72524 The goal of the puzzle is to stow the green stone with the other stones in the box. I have always made small improvements to this game,…
Before you read on, click here to check out my new parametric customizable version of this box! I made a small box to storage all this little Screws. Rounded corners inside to get them out easily. The "LidThight.stl" file is very thight,…
Sometimes a classic contour gauge is simply not the right tool for transferring contours to a workpiece. Especially in furniture making, panels often have to be adapted to uneven walls. This parallel gauge is simply set to the point with…
A minimalistic stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. The bottom is labeled, pay attention to this when inserting the hygrometer. A larger version of this stand:…
Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…
A cable strap to keep all sorts of cables from turning into a big knot. My goal was to find a solution that could handle all sizes of cables. For small charging cables there are already many models, but large cables also knot quickly. But…
A simple shelf bracket with a honeycomb pattern! Here you can find two more designs I made from this shelf bracket. 240 by 200mm. Take the long or short side up. You can also simply scale the shelf bracket. The holes have a diameter of…
I needed a flower pot for my basil, so I made this one. I uploaded the pot with and without holes, depending on whether you need the coaster or not. There are also two versions of this one, with centering and without. Be sure to print the…
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
Click here to check out the new version of this body kit for the MK3 and MK4! Description: After hours and hours of watching the printer printing, you've got bored with the Design of your Prusa? Give it a new look with the Ultimate Prusa…
A cable tie for printing from TPU! 3 wall lines and 30% infill should be enough for a good stability. To make the cable tie softer, you can set the top and bottom layers to 0. Then only the perimeter and the infill will be printed. In…
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
This is the third of three small flower pots I made for my plants. Print it with enough wall lines and top layers to get it waterproof . The pot has an inner diameter of 60mm and has the same depth. Furthermore, I added a solid version to…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
I took the Gecko from WebmasterZero on Thingiverse and painted it in Prusaslicer to print in multicolor. In the files you will find two 3mf files with the two versions from the photos. Just choose your printer with your perimeters in…
I wanted a Drybox that is as affordable as possible without compromising on features! There are already many designs out there that use the well-known cereal box as a basis, but none of them met all my criteria. I wanted to change that.…
This is the second of three small flower pots I made for my plants. Print it with enough wall lines and top layers to get it waterproof . The pot has an inner diameter of 60mm and has the same depth. Furthermore, I added a solid version…
This is a small box for silica gel. 190mm long, 68mm wide and 20mm high. So the box fits under a standard spool. The lid snaps in, printed from heat-resistant filament, the silica gel with the box can be dried in the oven. Holds over 100g…
This T-nut for 3030 extrusions doesn't require a hex nut or brass insert, as the bolt is screwed directly into the plastic. T-nuts for classic hex nuts often have the problem that they are weakened by the thinner plastic or one often…
A simple hook to attach to a smooth surface with double-sided adhesive tape. Note: The uploaded model has slightly smoother edges than the one in the photo. If you like check out my other designs too!
A simple and elegant jewelry box with lid, available with different compartments and stackable. All you need for the lid is an M3 screw with a length of 6-12mm. I've also uploaded a one-piece version of the lid. Here you can use a color…
A small but very useful helper for vacuum bags. This allows the air to be extracted much easier and faster. You can simply stick the part with some double-sided tape from the inside to the valve. Of course it works without tape but then…
A tool to easily insert cables into split wire loom tubing. I created this tool for a friend in sizes 8.5mm, 10mm and 13mm. If you need another size you can just take the 10mm version and scale it. Please leave a like if you enjoy my…
New: The body kit is now compatible with all versions of the Prusa i3 from MK3 to MK4S! Let me introduce you to the Bulletproof Wide Body for the Prusa MK3 and MK4 series! A machine that runs and runs and runs gets a look that is equal to…
A decorative vase, designed to be printed in vase mode! Just print this vase as oriented in vase mode, all angles are designed to be easily printable. To save time, 3 bottom layers are enough and the layer thickness can usually be set to…
A simple hook to hang your extension cords! Many know it for sure, if several extension cords hang on a hook that also have the same color, you usually have more than one cable in your hand when you take it down. This is annoying and so…
I needed a few legs for a bathroom cabinet, so I just made something myself! If it isn't so well visible in the pictures, the leg is slightly angled. This leg has a height of 160mm , you can of course scale it a bit in Z but note that you…
This is the first of three small flower pots I made for my plants. Print it with enough wall lines and top layers to get it waterproof . The pot has an inner diameter of 60mm and has the same depth. Furthermore, I added a solid version to…
I saw a video of this piece made of metal and wanted to have it too. So I tried to build it myself for the challenge. This is the result. It's a cuboctahedron which can be formed into an octahedral shape by rotation. The small joints are…
A small thin radiator bleed key if like me you have no space to reach the valve with a normal square key. I added a 5mm hole for a keychain. If you like check out my other designs too!
A simple test to check the bed adhesion and shrinkage of your filaments. I designed the model so that it should definitely lift from the bed. I wanted to test how much different materials shrink and how the enclosure affects them at…
This is a large flower pot with drainage holes and a saucer. There is also a coaster on which the pot is elevated so that more water can drain from the pot to prevent root rot. The plates are equipped with a catch so that the pot is…
This is a remix of my popular Honeycomb Shelf Bracket ! I added a voronoi and a triangle pattern. The shelf bracket has the dimensions of 240 by 200mm. Take the long or short side up. You can also simply scale the shelf bracket. The holes…
I've designed this drybox for the Prusa XL, of course it can be attached anywhere on 3030 aluminum extrusions. The drybox is opened via the red wheel with a 90° turn. It also holds the container for the desiccant, which could not be…
A simple cover for multiple socket outlets with standard switches. You need 2 M3x8 screws and some double-sided tape to attach. If you like check out my other designs too! Note: Since the question came up recently, the license states that…
A simple base plate for all Prusa MK3 models. New: I added a version which has holes to fix it with four screws ( M3x10 ) and T-nuts . This is more stable than the first version. I recommend to stick some foam rubber or similar as shown…
This is a really simple dust blower. Print it from TPU or a similar flexible filament. Make sure that especially the tip gets enough cooling. If the hole is not the right size, you can simply cut off the tip or heat a metal wire or…
A simple Handle for the printers SD Card. This model belongs to the Ultimate Prusa casing. You can of course use it without the casing. Since all SD cards are slightly different in thickness, you may have to stick a small piece of tape on…
I recently printed the Dragon Skull from Printed Into Existence , since it is a bit tail heavy I created this simple stand. The stand has the shape of the bottom of the skull which simply rests on it and therefore can be printed…
This is a simple wall mount for sanders with a 150mm plate. I've made it for the Festool ETS EC 150, I think the sanding plates of other manufacturers do not differ much. The bracket is simply mounted with two screws, I've also made two…
I took one of my oldest models and redesigned it! With the uploaded f3d file this box is now customizable via Fusion360. But I have also already uploaded some sizes, for most there is certainly something suitable. The boxes have a snap…
A simple extruder indicator. Two rotating arrows as you know them from loading screens. Required magnet: 8x3mm or 6x3mm If you like check out my other designs too!
A spider that jumps out of the drawer and will give your guests a scare at your next Halloween party! All you need is a rubber band and some double-sided tape. The spider's legs are heated at the joints and then bent. Clip the parts…
A simple stand for special knives. The model can be easily scaled via the slicer, depending on how big your knife is. The decoupling of the xyz dimmensions is helpful. The original model has a length of 250mm , at the point where the…
This is a remix of this bullbar for the Landy Mini from 3D Sets. I have added a winch. This bumper attaches the same way as the original one. Included in the model are support structures which can be broken out after printing. The…
I thought that instead of buying an additional box, you could simply print a better one yourself! My box is not only compatible with the Polydryer, unlike the original box it is also stackable, has an improved closure, a slot for labeled…
A simple model to test the component cooling. The test ranges from 40° to 75°. To obtain a more meaningful result, it is useful to duplicate the model and orient it in different directions. If you like, have also a look at my other models!
First things first: If your fan rattles due to an imbalance or bearing damage, this model doesn't guarantee that it will be quiet again. It may or may not work. So please don't judge this model by whether it worked for you or not. Many…
Side parts for a simple shoe rack. This is the second version of my shoe rack with an improved mount for the aluminum square tubes. You only need four 10x10mm square tubes in your desired length and 8 M3x8mm screws. When you have printed…
An Upgrade for the Ultimate Prusa Casing For those who want a little more color on the UltimatePrusa casing. These sleeves are simply pushed into the honeycomb pattern. I know it is like a puzzle because there are many different lengths…
A simple cable holder for the Festool Cleantec CT 15 E. I do not know if this could still work with other models of. It would be possible. Stowing the cable in the back gives you more room for accessories in the top compartment. It is…
A simple adapter to suck up dust from drilling. A quick solution was needed, so this is not a well-designed model. But it works well with the standard Festool hoses. The inner diameter is 35.6mm and becomes slightly narrower further…
Do you have the bear extruder? Follow this link: https://www.prusaprinters.org/prints/63630 First of all, why two fans? - You have better access to the nozzle - The cooling is improved - Significantly quieter, as the fan speed can be…
I have created some accessories for the Landy Mini from 3D Sets which can be easily attached with some super glue. The colors you can see in the photos. The mirrors can be easily bent in the right direction after gluing, license plate and…
I was playing around with a dodecahedron, this is what came out. Not a world class design but quite useful to test the retract and the quality of overhangs. If you like, have also a look at my other models !
A Decoration Vase. Designed in Fusion360 to be printed in Vase Mode! Just print this vase as aligned in vase mode, all angles are designed to easily be printable. To save time, 3 bottom layers are enough and the layer thickness can…
An MMU version of the display cover for the Ultimate Prusa case (you can actually use the cover without the casing). New: Since many have asked for it, I made the honeycomb pattern a little wider. Ultimate Prusa casing:…
The goal of the puzzle is to get all the pieces into the box. It works, even if it doesn't look like it at first! This is the third version of my puzzle game, inspired by an old wooden puzzle. Since puzzles like this sit on a shelf most…
A simple holder to mount under a table, shelf or similar. The screw holes have a diameter of 4mm. Intended for flat head / penhead screws. The blind hole has a diameter of 10mm and a depth of 3mm. If you like, have also a look at my other…
Some Inserts for the Prusa lettering on the LCD Cover. I uploaded a test file too, so you can test whether the letters fit inside. If it doesn't fit, play around with the XY compensation. If you like check out my other designs too!
Note: This design is not mine. The original creator of these parts is pekcitron . The parts were reworked by jltx and uploaded here . Many of you will never find / have found these parts on Thingiverse, but since I think this upgrade…
The goal of the game is to sort all balls by color. The game has the same structure on the front and back, thanks to the middle piece, the balls can be transported from right to left and from front to back. You need 4 screws M3x16-20 and…
This is the standing version of the spool holder, I have already uploaded a hanging version , some parts are the same as the other spool holder so you can reuse them if you change your setup. Introduction: After some experience with my…
I derived this vase from my “ Gelblicht Lamp ”. Just print this vase as aligned in vase mode, all angles are designed to easily be printable. To save time, 3 bottom layers are enough and the layer thickness can usually be set to 0.24mm…
A simple stand for your 18650 or 21700 Batteries. It can hold 24 of them. If you like check out my other designs too!
This is an alternative wheel design for the Landy Mini from 3D Sets ! I took the original model of the rim, and swapped the center section for a 5 spoke design. The reception of the axle and the tire are unchanged. If you like check out…
I have mirrored the model of the Y-Rod holder of the MK3s+, so that the upper part is removable and the axles can be taken out upwards. Compared to the original Y-Rod bracket you need a total of four additional square nuts and bolts. Make…
I built a hanging mount for the universal auto-rewind spool holder. It can be printed in one color or in two colors with a change of filament. You need the following screws: 6x M3 x 8mm 6x M3 x 10-12mm 6x screws which fit through the 5mm…
This is the hanging version of the spool holder, I have now also uploaded a standing version , some parts are the same as the other spool holder so you can reuse them if you change your setup. Introduction: After some experience with my…
This is a modular system to divide your drawer according to your wishes. I have created different sized containers based on the hexagonal shape which are printed in Vase Mode and can be connected to each other. Besides the different…
Tired of constantly finding squished bananas in your photo bag? With these photo scales the "banana for scale" is history. Five different scales with 1cm² squares, which are simply printed with a color change. 100mm 200mm 250mm 100x100mm…
Since the Prusa XL with its quite hard feet transmits vibrations and noise to the ground, I have made a foot which reduces the vibrations through foam pads for speakers and thus makes the printer much quieter. You need a total of 6 pads ,…
A small, discreet extruder indicator. A magnet with the size of 8x3 or 6x3mm is required.
This is my first batch of the Kurzgesagt birds as fridge magnets, you can find the second batch here . As a big fan of the Kurzgesagt channel on YouTube , I made some matching fridge magnets. Everyone who knows this channel knows all the…
Click here to get version 2.0 of my puzzle game! And here an even newer version! A nice puzzle game. The goal is to get the Green Stone together with the others in the box. It seems impossible, but it works. Edit: Added two alternative…
This is my second batch of the Kurzgesagt birds as fridge magnets, you can find the first batch here . As a big fan of the Kurzgesagt channel on YouTube , I made some matching fridge magnets. Everyone who knows this channel knows all the…
A simple way to store your Nozzles in the Ultimate Prusa casing . In the style of the colorful upgrade for this casing, I created a simple drawer to store your Nozzles in. The drawer is made for the top row of holes. There are two…
I have continuously optimized my profiles and can now print a face shield in 36 minutes. It is still very stable and elastic. Every printer prints differently and every roll of filament is slightly different. I can not guarantee that my…
The stool measures 450x280x90mm. It is fully printed. You simply print out the same part twice and screw it together. In addition, the rubber pads should be printed from a flex filament to prevent slipping. The stool needs to be printed…
This is a parametric design that allows you to place your shower head where you want it. Often shower head mounts are installed in places that are not ideal to avoid drilling into a tile, for example. Open the f3d file in Fusion and add…
This picture is not painted by myself, I only got the permission to convert it into an .stl file and make it available for you to download. I made a frame so that it can be glued and hung up. If you like check out my other designs too!
A simple holder for your AA batteries. Here you can find the same design for AAA batteries! I have created different sizes, because not everyone needs so much space for batteries. With the "mini" part, the individual modules can be placed…
Side parts for a simple shoe rack. Before you print this model, consider printing my new and improved version of this shoe rack ! You need 10mm square tube with a wall thickness of 1mm . Also 8 screws to fix the aluminum profile. Deburr…
This is the Version for the Bear Extruder. If you have a stock MK3S/+ extruder follow this link: https://www.prusaprinters.org/prints/63279 Revised version is coming soon! But first of all, why two fans? - You have better access to the…
Originally, I just wanted to make a few small changes to the Gridfinity Drawer Chest by @ChippWalters This resulted in a completely redesigned version that still uses some of the original dimensions. The drawers are therefore compatible…
A trophy in the look of a hotend! I used the design of the E3D V6 hotend as it is probably the most common hotend and used this model from JuanCallon as a template and modified it significantly for this purpose. All you need is some glue…
A small but hard test cube for multicolor prints! I created this cube for a video on the YouTube channel mpoxDE to test the Prusa XL. The cube contains some steep overhangs and areas that are difficult to print with the secondary color…
Since I have just created a V6 nozzle holder for the Ultimate Prusa casing , the next generation nozzle should of course not be missing. Ready to hand next to the display is in my opinion the perfect place for it, unfortunately there is…
I had to repot a large plant and designed this pretty big plant pot for that purpose. Since not everyone needs such a large pot, I also uploaded a smaller version that is 70% of the size. You can easily scale this to your desired size.…
Many of you, including me, always have some spools of filament lying around openly. Especially filaments that are rarely used often lie around for months, collect dust or get a lot of daylight. You don't want dust in the extruder and UV…
This is a box for the Bulletproof Wide Body Kit to mount in place of the display when it is mounted elsewhere, e.g. for enclosure. The box can also be used for the Ultimate Prusa Casing as long as the right side panel is the same as the…
A simple logo plate from the game Gwent from The Witcher 3: Wild Hunt
I had this idea for a box that uses two shadow gaps as a design element. There are two ways to construct such a model for 3D printing. The boring way which uses color changes and small support structures and the cooler way which consists…
Many cities are frequently burglarized. Often, the burglars are not afraid to break a window. At my home has already been broken into twice, in my job I often have to deal with burglaries and have made the experience that burglars are…
I received a special gift and that of course deserves a special place! So I created this wall holder, which holds quite discreetly with the help of two magnets the steel sheet to the wall. The holes for the magnets have a diameter of…
I created these samples to find out how long my different materials can withstand UV light until they become brittle. The samples contain thinner areas which can be broken out from time to time to check if the material has already started…
