Liczymy pasujące modele…
A redesign of my original D20 Cookie Cutter that incorporates the stamp into one piece and a cutter into the other. There are two separate objects included in the file. They will print in place, so both objects can be centered on the…
I needed a way to get some fumes out of my garage without opening the door all the way during the winter. I designed this duct to attach to a 120mm fan so I could attach some flexible ducting to it with a hose clamp. I opened the door…
**UPDATE** - I posted a version 2 that works a bit better… https://www.printables.com/model/353451-d20-cookie-cutter-v2 My wife loves to bake and my son loves D&D and cookies, so I made a cookie cutter to look like a 20 sided die. It's a…
A couple nozzles I designed to clean the coils of my refrigerator. I needed a long narrow reach. The straight nozzle is 14mm outer diameter (~9/16"), 10mm inner diameter (~3/8"), and 180mm long (~7"). It fits the standard 1-¼" shop vac…
A remix of Thelguana's design intended to be printed in TPU (or other flexible filament). I added a retainer strap with loop that fits over the neck of the reservoir opening. I also added a logo to indicate what the cap is for. I printed…
I wanted a way to hang a LED T5 fixture from my drop ceiling. I paired with some drop ceiling track eyelets that I printed.
A TPU dust boot to replace ripped, dry-rotted, tie rod end boots. I designed these to fit my 2003 Honda CR-V, but they may fit other models. The large end is 28.5mm for a snug fit over the 30mm end of the tie rod. The small end is 12.7mm…
I designed these shoe deodorizers for my sons basketball shoes. They were modeled in Fusion 360. They are filled with silica gel (aka - crystal kitty litter), which can be dumped and replaced when it's no longer effective. Printed with a…
Remixed from https://www.thingiverse.com/thing:4372110 Removed the Chevy bowtie so that I could print flat on the bed. I printed with zero bottom layer and used the 'gyroid' infill at 15% to get the pattern on the outside face. Print…
This project is what inspired me to purchase a 3d printer. Back in 2013-2014, we bought an ice cream maker, but had only used it a handful of times. In 2018, we were making a batch of ice cream and it suddenly stopped turning the…
I installed some drop-in threaded anchors in the floor of my garage, but wanted a way to keep dirt/junk out of the threads when the anchors are not being used. I modeled these up to thread into the anchor. The low profile plug prevents…
Extended supports designed to clip into the pullout drawer. You'll need to flip up the vertical supports and then slide the notched end into the drawer. The left and right side extensions are just mirrored from the other. You can print…
I originally bought this camera to use with Octoprint, however I did not like the auto-focus. So I went back to using the ol' trusty C270 for Octoprint and decided to use the C615 for my work web cam. I use a TV mounted on the wall as my…
I needed a way to hold some lamp cord in a straight line going down a wall. I couldn't find any existing models for what I wanted so I modeled these up. They use a single thumbtack to hold to the wall. Insert the thumbtack first, then…
The square wrenches that I have were angled too much to work well on the carriage lock bolt on my Atlas lathe. They also didn't fit tightly on the square head and are heavy so they tend to fall off. This has a 5 degree angle to the square…
Lens cover to fit over the standard lens guards on an Insta360 x4. It has clearance on the sides to fit around the QuickReader if it's installed. I originally printed in black TPU, but it blended too well with the camera and wasn't…
We recently replaced an old hand held vacuum with a fancy new 'Lithium powered' Black & Decker model (Model No. HHVJ315JD10). After unboxing it, I realized that the only way to store the thing was to lay it down. Our old unit had a…
I noticed that the bushing for the headrest on one of my rear seats was missing, so i designed this. It prints as two pieces and then is glued together. The top piece has a cavity to help center the 'D' shaped piece for glue up. Some…
I was doing some suspension work on my 2WD S10 and noticed that the OEM ball joint boot had split. The joint itself was still tight and moved freely so I modeled this up and printed in TPU 95 so I could get things reassembled. Dimensions…
The stock dampers on the speedometer of my DR650 had started to flatten out, causing excessive movement of the speedometer housing. I had some TPU 95A filament, so I modeled up Version 1. Upon installing, I discovered that the 95A…
I have some hand cleaner that comes in powder form. The original cap on the bottle is a wide mouth flip-top cap. If you're not careful when pouring, you'll pour way too much product, which is a waste. I created this restrictor plate that…
I'm using a Photon 2 along with a Grove Ultrasonic Range Sensor to monitor the salt level in my water softener. I designed this for a quick and easy way to mount the Photon 2 to the wall. The solderless mount can be used for quick…
This is an alignment tool that I used to replace a busted transmission oil pump in a F4A51 transmission from a Mitsubishi Galant. The oil pump for this transmission has nothing to index it to the housing and therefore there is no way to…
My ‘97 S10 (2.2L) was missing a grommet on the air intake pipe that attaches to the upper radiator fan shroud. I removed one of the existing grommets and modeled and printed a replacement in TPU.
The battery cover for a Etekcity brand remote controlled outlet broke the first time I tried to put it on. I modeled this to slide over the end of the remote to keep the battery in. It's a friction fit. Here's the outlet this remote is…
I had a central vac hose that I wanted to adapt to work with my shop vac. The fitting on end of the central vacuum hose is reverse threaded (righty loosey) onto the hose, but was too small diameter to fit into my shop vac. I modeled this…
I wanted a short dust cyclone setup for my bead blast cabinet that would fit below the blast cabinet shelf. I designed this to fit 2" PVC pipe for the side inlet. The inlet for the lid were designed for a 90 degree shop vac fitting I had.…
I repaired a Worx WG650 snow thrower that had a couple broken paddles. I used some replacement paddles for a different brand of snow thrower and modified them to fit. The video of that process can be seen here: Worx snowblower paddle…
A non-marring cover/boot for a 50mm round magnet. Printed in TPU 95A
My Orico A20Plus drive came detached internally. I was unable to plug the USB-C cable into it and needed to get the files off of it, so….I attempted to get it apart. I thought that the housing just snapped together so I attempted to pry…
My wife makes sugar cookies and wanted a way to pack more than a single layer of cookies into a casserole dish for transporting. These multi-level supports were designed for a 13x9x3 inch Pyrex casserole dish, but they may fit other…
I wanted a place to store the extra tips for my soldering iron. There's also a spot to store a tube of solder. Prints with no supports. Print with holes facing build plate. Printed with 0.6 nozzle and 0.44m layer height and 10% gyroid…
To wszystkie aktualnie dostępne wyniki.
