Liczymy pasujące modele…
This is a fully rigged hand for blender. You can change every finger individually but it's recommend to just use the control bone. You can rotate the control bone to rotate the first bone of each finger and scale it to curl the finger.…
This is a scan of a realistic human denture model.
Nozzle wiper for Flashforge AD5M that can be snapped on to the build plate. It uses the bambu lab A1 silicone wiper. It is compatible with the Flashforge Adventurer 5M Pro defaults, that is - works with default bed leveling routine -…
A case for a humidity sensor system consisting of a DHT22 sensor, a Wemos D1 Mini, a 18650 battery holder and a battery charging module. Features: Sensor is thermally isolated from the rest of the electronics lid holds tight by press fit…
This is a repaired and slightly modified version of "human tooth model" by Svenergy. The model is watertight and a 2 manifold. I've been told by someone with deep knowledge about human teeth that a tooth like this does not usually exist.…
Broom thread common in germany for use with a metal tube (inner diameter 20,6mm, outer diameter 21,6mm). The design is parametric and can be changed with the latest FreeCAD realthunder realease.
This model was created and can be changed with FreeCAD realthunders branch (https://github.com/realthunder/FreeCAD/releases, Stable 2024.10.03)
This is a little helper piece that presses the lever for the filament cutter for the Flashforge 5M Pro for the following filament cutter: https://www.printables.com/model/1315540-flashforge-adventurer-5m-ad5m-filament-cutter-one…
This is just a hand grabbing a guitar. It's a bit tight, so the guitar has to be twisted. If it doesn't fit your guitar you may have to rescale it a bit. For the wall mount i just rely on a hole and friction. I used a 8mm threaded rod…
A cap for your spray cans in the shape of a sneezing man with three openings (mouth and the two nostrils). I tested it and it works. This is a female cap. You can use it with male cans or you can put an adapter tubing in there. I used a…
This is a laughing head. It may also be sneezing or coughing. Whatever you want to see. The model is based on the laughing face by Davison3d (https://www.thingiverse.com/thing:2994999).
Let me know if you also need other versions like a simplified version or with different pins (for example 90degree). Update: 2025-10-4 small fix in grid coutout dimensions
This is the upper part. It is designed to use M3 threaded heat inserts For the lower part go to the original model.
How i build it i printed the zoetrop with the mounting hole at the bottom and just plugged it onto an 140mm PC-fan a 12V fan modules controls the speed of the fan a micro-controller generates the pulses that go to a power-MOSFET. That…
This is a modified version of the Ikea Cart Table Top Storage Clip RÅSKOG of Ender Ending Rodríguez for smaller tables / plates. It is modified to fit tables with thickness 12,5mm in the middle and 7mm on the outside. The radius for the…
Alignment corners for Ender 3 to more easily put the removable print surface back on. I just used double sided sticky tape on the whole surface of the part and and it holds firmly so far.
I needed a slightly modified version of the camshaft since i had only smaller bearings at hand. The bearings are for the selector arm (opposite of the drive wheel) and are 7mm instead of the 8mm of the original design. With those smaller…
Dreikantschlüssel für Müllcontainer. Innenkantenlänge: 10,7mm Ich empfehle zumindest den zylindrischen Teil mit 100% infill zu drucken. Es gibt auch ein OrcaSlicer Project file, dass ein Modifier einhält der nur diesen Teil ausfüllt und…
A set of moving gears in the shape of a tooth. There is a pin model made with FreeCAD that is intended to take a pointy metal pin so the pin is stronger and easier to rotate. The pins_3x is the old plastic-only pin.
Longboard / skateboard pivot bushing. Material: TPU ------------------- This model was created and can be changed with FreeCAD realthunders branch (https://github.com/realthunder/FreeCAD/releases, Stable 2024.10.03)
This is a stereoscopic optics for raspberry pi camera. This allows to map two images (left, right) to one camera image. It is possible to put it on a VR-headset to have stereoscopic vision. I tried it with a google-cardboard-like Phone-VR…
original by ccarbs December 30, 2020 https://www.thingiverse.com/thing:4702781 this is the .3mf file which includes the settings for the infill blocks. Possibly other settings are have to be adjusted because these are my default settings.…
This is a parametric wall mirror mount that hides the screws. The idea is that the top parts slide onto the small rail parts at the end to fix the mirror. I included STL and STEP files for 90° and several other angles. If you need a…
A simple hanger that fits on a pipe. Parametric design, so you can change the diameter. Default pipe diameter is 21mm, i.e. of the FreeCAD file and the .3mf model file. This model was created and can be changed with FreeCAD realthunders…
This is a little improvement for the Cassette Tape Dispenser of Ken Mills . I had the problem that the tape on the hub was sliding out too easily. That's why i designed this little helper, that pushes the hub in. It also makes it look…
This is some parts for a broken gear lever housing. You still need some parts of the original, that is the screws, the metal bracket and the lever itself. For the complete shifting system you obviously need the bowden cable and everything…
Hydroponics netpot for holes of size 64mm Category: Outdoor & Garden
A simple MKS Pi mounting plate for Ender 3 Pro. Made with FreeCAD (realthunder branch Version: 2024.1006)
This model is a minimal phone stand that is meant to print fast and with little filament. Its parametric so you can change the dimensions. Print settings: line width 0.8 (then only one outer wall is necessary) This model was created and…
MKS TFT 28 Display Mount for Ender 3 made with FreeCAD. The design can easily be changed because it is parametric. This mount needs the electronics to be on the rear side. See Teaching Tech's Ender 3 rear case for that. Category: 3D…
This is an improved version of the hypamats 'Kitchen Roll Holder'. This model was created and can be changed with FreeCAD realthunders branch (https://github.com/realthunder/FreeCAD/releases)
This is a replacement clamp for holding the battery on a Makita 6222D electric drill. This model was created and can be changed with FreeCAD realthunders branch (https://github.com/realthunder/FreeCAD/releases, Stable 2024.10.03)
This Y-Feeder can be placed in front of your bowden input to the cold/hot-end to make it a dual color system. Of course you still need an additional stepper drive. The design was made in FreeCAD and is fully parametric. You can change the…
This is a replacement for the 9.6V Makita 6222D. I made it since i found the original diffcult to switch with the thumb while holding it with one hand. This model was created and can be changed with FreeCAD realthunders branch…
The plastic part in the front / the chuck was missing, so i designed a replacement. This model was created and can be changed with FreeCAD realthunders branch (https://github.com/realthunder/FreeCAD/releases, Stable 2024.10.03)
This is an adapter for SOG Air System and Perfect Van TTT (Trockentrenntoilette). The photos are from an older version of the adapter. The new version is also tested working. Please leave a thank you if you find this model useful.
Suitable for bags with an edge radius of around 30mm. I also added the model source files so you can adapt the design if need. The model was created with FreeCAD (realthunder branch).
A mount for the Perfect Van TTT (Trockentrenntoilette) Sonero liquid sensor to keep it from sliding or falling off. The sensor is snapped in and sits firm touching the container to ensure it detects liquid spill as early as possible.
This model is a remodelling of the case of hgross to fit samsung power adapters. In the end came up with a different more compact design but this might be still useful to someone. The FreeCAD source files are included so it can be adapted…
This case is a compact case for a Pi Zero 2 W and a SONOFF Zigbee 3.0 USB Dongle Plus. The USB connection is directly soldered on the board. The labels are not included in the files. They are put there later in Orca slicer. I used just…
This nut fits the bike bad rail of neilsc (Ortlieb style rail) and the hook of Lukaskun . There are two models "rail_nut" - it is designed so you can cut a M5 thread into it "rail_nut_inset" - it is designed to take an M5 heat insert D7mm…
To wszystkie aktualnie dostępne wyniki.
