32 modeli
Got an El-Cheapo broom that lasted me about 3 months before the business end fell off. Turns out the cheap injection-molded plastic threaded end failed. I was looking around on Thingiverse to see if someone already CADed out a replacement…
Made a 4 hook rope maker for a local BSA troop. I had one of these as a kid made of wood, figured I would try to print one for others that might want to keep one in their pack. This design is 100% printable no supports. There is no…
I was looking for a simple set of hand guards to take the wind off my hands in the winter and maybe handle a few bugs/rocks/rain in the summer. I couldn't find anything else online that I could remix, so I spent MANY hours with FreeCAD…
There are a lot of these LED riser models for the BambuLab AMS. Several I REALLY liked, but didn't want to spend 2 hours at a hardware store searching for screws and nuts etc. I designed this one to be minimalist and printable on the X1…
Print this, or don't. IDGAF All of my models I share are free and I use them. If anything turned out less than acceptable I change it or remove the model. You can print this laying flat (with supports) or in the default orientation on…
Use this STL to customize your own name plate for your Apache 4800
I found a few of these bomb beads for paracord, but they just didn't print nicely or work well as zipper pulls/toggles. After a few goes at designing , I cam up with something that worked, looked good, and printed easy. I like that it…
Print this flat with 0.2mm layers. at layer 37 insert BBs to give it ballast/weight
Print this with 3 walls and 0% infill in a filament of your choosing. Pause the print periodically and load it up with BBs. The BBs add substantial weight/ballast to the model so it holds the vacuum better.
My wife has been on crutches for a lot longer than we were planing. I finally got around to designing a decent cup/phone holder that secures inside the crutch so that she can get herself water and be a little more independent. Designed…
I do some on-the-side python development at work and thought it would be fun to print a 3d python logo as a desk ornament. I started out using another project I found here on Thingiverse, but my printer wasn't printing the pin assembly…
I printed these on my Bambu Lab CX1 on Fine detail 0.12 mm layer height on the “silent” slow setting Hatchbox Glow PLA . They turned out great. I took some small paracord inner rope to make the small lanyard bit and some regular orange…
I didn't want to use the crappy ABS mount for the original speakers. New speakers were a bit big for the original so I made these. I wanted to preserve the original harness connector to make install easy. Looks and sounds great. Should…
I bought an FDE Apache 4800 case from Harbor Freight and I wanted to customize the look/feel of the default latches. Print on a side so you dont need supports and you get the most strength. I used 0.2 mm layers with 5 layers for…
The main board case uses 2 M3 screws. You will need to use a tap and die set to get the threads nice. The CC1101 case uses a single M3 screw. The NRF24 case uses a small blob of super glue to ensure the case stays together. Print in…
Print in something strong, no supports needed. Stuff a microfiber towel in it so its “poofy” Attach to extension rod Get cleaning Before and after shots of dirty dome cleaned with adapter and microfiber towel.
Print two of these in strong weather resistant filament. Hook them first and swing them around underneath the top part of the garage unto the tongue/grove to secure. Update, Shim-5 is a 5 deg shim that gets the garage a bit closer to the…
This model is very similar to my flipper dock. It uses the same 10mm 5-pin magnetic usbC cable. Unfortunately, you will probably need supports for this model, unless you have a printer that does really well with overhangs. My FDE/BLACK…
For Christmas, I got a Bounty Hunter Metal Detector and Pin Pointer combo. Within 5 minutes of trying to get the pin pointer going with a 9V battery, the tab on the back of the pointer snapped and the battery casing wouldn't go back in. I…
the modifyied slide cover is a remix from https://www.thingiverse.com/thing:6792300 . Props to this maker for making something so helpful! put some fuzzy skin on the outside to make it easier to manage. heat up corner of cover and push it…
Needed something like this to take my "stackable" wire-shelves from walmart and keep them secure on my wall mounted wire-shelves in garage an laundry room. simple print with tight tolerances. Enjoy! NOTE: Printed in PLA. If you print in…
This is a simple bracket (print 2) to hold your HTRC Smart charger (or similar) to the wall. I ended up rotating the charger up 45 deg so I could see the display better when standing by the mower. Its a simple design, print on the side…
I used my 3d scanner to match the curve of the neck of the stand. V1 turned out ok but needs supports. As I use this I'll make updates. V2 update, fixed STL issues and uses less filament. Easier to get pads out and a better fit with the…
This part failed on me and the PCB/LEDs droped into the console so I couldnt see what gear I was in. Not a huge problem since the dashboard shows everything, but it irridated me and gave me a problem to fix with my printer. printed in…
I made this part to be a SNUG fit in the standard battery tray of my RM480EX. The bumpers go into each corner and wedge the CHINS 48v battery in the center. These bumpers keep the battery from moving in the X and Y axis, you'll still need…
This is something I have been working on for a while now and finally had the time to put some thought behind it. It is a handle with modular hooks that can carry several plastic bags at the same time. I used to just grab as many in one…
Print upright, no supports. version with divider or version without.
The screw is used to fix the light fixture to the top of the flagpole. A ornament like ball or eagle will not work with the external alpha 915 antenna. If you want to put an internal antenna inside the light fixture, then you can keep the…
My daughter had a pretty bad gash on her head from these stupid bed frame corners. So I printed a safety cap to protect her if she ever falls on it again. If you have a metal box frame like this, please consider covering them. I wish I…
After getting my Hubsan H107d+, I quickly learned that the transmitter was a bit different from what I am used to flying with. The Thumb-sticks felt too long and had far too much throw to feel like I was in control of the drone. I figured…
Print with 0 infill, periodically pause print to add BBs for ballast/weight.
I wanted to create a nightstand lamp that had a AC wall plug and USB plugs for all my charging needs at night. Couldn't find anything to buy that I liked that was affordable so I created this thingi. It is a simple lamp I tried to make…
To wszystkie aktualnie dostępne wyniki.
