Liczymy pasujące modele…
A simple ball-mount adapter that fixes and allows fine-tuning of the Buddy3D camera viewing angle inside the Prusa Core ONE L enclosure. The problem: The stock Buddy3D Cam position on the Core ONE L often results in a poor viewing angle —…
The stock Sovol SH03 spool support has a very wide bearing wrap angle (~123° for a 200 mm spool), which causes the filament to bind and jam — especially with smaller diameter and cardboard spools. This lodgment set significantly reduces…
This is a detergent tablet holder for a toilet tank with height adjustment. The internal size of the holder is 25*66 mm. UPD added a big cup 30*86mm. I recommend printing from PETG or PC as they are chlorine resistant. layer height 0.2…
## Print settings: Material: PETG - Layer height: 0.2 mm - Perimeters: 4 - Top/bottom layers: 10 Cuttings of transparent PETG can be inserted into the holes for the LEDs. Assembly does not require glue, but you can apply a little glue to…
Shelf 2+ Perimeters 3+ Bottom 4+ Top layers 10%+ infill 0.25mm layer height Shelf hook 3+ Perimeters 5+ Bottom 5+ Top layers 30%+ infill 0.2mm layer height upd 11.08.26 added 130mm deep shelf (added by request, I have not tested it on my…
These are custom 3D printable massage gun attachments designed to fit Hyperice Hypervolt massage guns, and they may also fit other similar devices that use a 19 mm mounting socket . The set includes three attachments: 1. Fork attachment A…
My garden hose spray nozzle trigger lever broke — a thin plastic part that takes a lot of mechanical stress every use. Instead of buying a new nozzle, I modeled and printed a replacement. The lever pivots on the original metal bolt and…
Side handle for Prusa Core ONE L with connector for PTFE bowden tube. I recommend removing the original collet from the side filament sensor, but this is not necessary, it will just make disassembly easier. Print settings: Material: PETG…
This adapter replaces the original single-lens holder on the headband magnifier shown in the photos. It provides two parallel slots, allowing two lens assemblies to be installed and used simultaneously for increased magnification. The…
This is just a scale model of a 9V battery. https://en.wikipedia.org/wiki/Nine-volt_battery
Halfmoon Wall Lamp is a simple 3D printed wall-mounted lamp / sconce with a half-moon shade shape. It is designed for a ceramic E26/E27 lampholder and a low-power LED bulb. The model was designed around the IKEA LED2201G8 LED bulb, but…
This is a single-material version of the tall H20 hex top cover for Malolo’s screw-less / snap-fit Raspberry Pi 4 Model B case. In the original model, this specific H20 / Hex / Fan30 / Rails combination is only available as a two-part…
A 3D-printable replica of a classic marine radio room clock , featuring the traditional red and green radio-silence sectors, 12-hour and 24-hour markings, an integrated quartz movement holder, and a rear keyhole wall mount. The clock is…
This is an updated, more durable version of my Thingiverse model. If you want to thank me, https://ko-fi.com/maxpi After the parts are printed, they need to be connected together using two wire segments 12AWG 4mm2 D-2mm. Clamp a piece of…
After looking at other shelves for storing plates and reading reviews about them, I realized that it was easier for me to make my own than to adjust and correct someone else’s. This shelf is made based on the original 3D model of the…
Replacing a lost polar finder top plug from Celestron Advanced VX Mount (AVX). I'm working on restoring a Celestron Advanced VX Mount that is missing many parts and decided to share the models. The rest of the models from this project…
I have been using the Contigo Transit Autoseal Travel Mug for many years and have several of them. But at some point the clips that hold the valve began to fail. For one of them, this happened within a month; unfortunately, the…
Replacing the broken battery cover of the Yunmai Color Bluetooth Smart Scale. Print Settings: 3 perimeters 0.2 layer height support required After printing, I recommend removing the hot build plate and bending it a little so that the part…
Thanks very much to Jaha for his great design. All three top sides are assembled here 1-10 11-30 31-50 with 7.5mm holes for pan head screws. I intentionally do not upload the rest of the model files as there are no changes in them, please…
I needed a place to display my 3DBenchy collection, and after looking at the available models of mounts, I realized that they are all either inconvenient, or too complicated, or require a ton of plastic. My model for 8 3DBenchy's only…
Replacement of lost polar finder cup from Celestron Advanced VX Mount (AVX). I'm working on restoring a Celestron Advanced VX Mount that is missing many parts and decided to share the models. The rest of the models from this project will…
Replacement of missing declination axis end cap for Celestron Advanced VX (AVX) mount. I'm working on restoring a Celestron Advanced VX Mount that is missing many parts and decided to share the models. The rest of the models from this…
To wszystkie aktualnie dostępne wyniki.
