Liczymy pasujące modele…
The battery latch of one of my Bafeng UV5R broke. I looked on the internet for a 3d printed replacement, I only found a solution on Youtube, but the printed latch was far from functional. Therefore I designed a new one in order to better…
A simple ON-AIR warning sign. The top is printed in 2 colors, the .gcode is defined to change filament on the 3rd layer. After print you will have to insert 1-4 LED strips and, optionally, a plug. I usually use 2x12V LED strips and a 12V…
A simple to print dual color On Air warning sign. Just swap the filament color and have a dual color print. The combination of colours is yours to choose. The base is printed in a single colour, black, has 4 holes on the back for easy…
My wife bought a set of 4 towel hooks for the bathroom radiator, but their grip was awful and every time we picked the towel would grab the hook also and fell on the floor. Pretty noisy in the middle of the night. Also after a few falls…
I needed a replacement for the cardboard enclosure that a music box came with because my daughter ripped it apart. This plastic enclosure focuses the sound and the music box sound better. You will need 3 M3 screws. The lenght is not…
The standard buffer for AMS on BambuLab printers has a wider hole for the PTFE tube, but the 4 inputs hub for multi-AMS has a 10mm wide hole. So the quickrelease buttons I found did not fit the 4 inputs hub so I designed a proper one.…
The easiest way to attach, carry and fast detach keys from a lanyard or other carrying solution. It uses 5x10 round neodium magnets. I used one in each half but because the neodium magnets are so strong you may only use one magnet that…
I needed the simplest and cheapest to print phone stand that I could use to watch Youtube. This stand offers 2 angles of the phone accordind to the height your eyes are. If the phone it is very low respective to your eyes you should use…
Simply print 2 pieces of the same part. In one insert a M6x60mm screw and in the other a M6 nut. The 2 large holes are there to help your fingers to tighten or loosen the spool. Happy printing!
The best and easy to use panel for keys and small documents, always at hand, ready to pick and go. Also easily readeable key tags. The key tags are empty and you can write anything in order to identify the key. I included the panel…
Introducing the " EyeSaver 3000 " – the superhero of soldering companions! Picture this: you're busy soldering away, and out of nowhere, those pesky fumes start playing havoc with your glasses. Fear not, for the EyeSaver 3000 bursts into…
A thumbnut for M5 nuts. I desegned it in order to be used for broken magic arm. The magic arm is used in cinematography for mounting camera, light and sound gear to complicated positions. It is common for the fixing nut to brake. This is…
This M6 heavy-duty thumb nut is designed for applications demanding high torque. Its ergonomic grip and robust design make it perfect for projects where a regular nut just won't cut it. Print it yourself and conquer those tough tasks!…
Another way to attach a trash bin to your workbench is by using this method. The design allows for vertical orientation printing without the need for supports, with the lower (flat) side facing down. The flat side of the bin features a…
I needed a photoframe for some 10x15 cm pictures. I looked on the internet for a model but I couldn't find a fast printing one, so I design it. It is a press and fit type, no glue needed.
Maximize your receiver setup with a one-of-a-kind 3D print. Engineered for precision and flair, The Audio Mount Pro is a must-try print for enthusiasts! Introducing the Audio Mount Pro, a remarkable 3D printed solution for mounting up to…
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
A simple to print 3 part design for kids to learn to read analog clocks. The print consists of a round shaped base designed to fit a Prusa MK3 and the two clock hands: The long and the short one. I printed the base in dual color for…
The best way to mount up to 2 URX-P40 Sony audio receivers both facing the cameraman, very useful to monitor the battery and audio levels.
This is the template to help you drill the holes in the right places when mounting the step-up converter adapter on a ATX PSU. The original and complete model can be found here:…
I had a room odouriser mini spray laying around but without its top (head), so I made one. It is a snug fit, no glue required.
I needed a way to add a step-up 1200W converter. I built a pan-tilt zoom mechanisms that require power over long distances thru thin wires so 12V won't cut it. 36V is the lowest I could make it work. So I took an old ATX PSU, removed the…
This is just the text .st; for the step-up converter adapter case on a ATX PSU. The original is here: https://www.printables.com/model/711470-adapter-for-atx-computer-power-unit-computer-power
Sometimes it is easy to accidentaly press the On/Off button on top of the Liliput 4k 5 Inch field monitor. This protection eliminates this to happen.
Kadda thermostatic bathroom faucet comes with a pretty poor to rotate handle. I designed a handle with a wing to help rotate it.
Tired of the wind slamming your PVC windows shut or swinging them wide open? This 3D Printed Window Keeper is a simple, highly functional wedge designed to sit securely near the hinge mechanism, keeping your window perfectly propped at a…
This is a .stl 3d model of a N20 DC geared mini motor. It is useful when designing a part that includes this kind of motor.
Turntables are used to display products while being rotated 360 degrees. There are so many variants but none was suitable for what I needed. So I designed my own. Software download:…
A servo mount for pan tilt platform based on SG 90 servos. It is used to move a ESP32 cam module. For vertical mount: https://www.printables.com/model/465448-esp-32-cam-mount Horizontal mount:…
A simple and economic extension arm for Gopro or similar action cameras. Lenght is a bit more than 150mm. It does not contain a retainer for the M5 nut!
I have a 2230 M2 SSD and needed to intall it on a 2280 slot.
I needed a quick release plate for our Manfrotto type camera tripod heads. If a cameraman forgets the original QR plate, there is a back-up in the camera bag. I made the plate according to the dimensions on the Manfrotto website: 90 mm…
An easy-to-assemble robot car built around the versatile ESP32 Cam module. The car is equipped with two TT motors (yellow edition) complemented by dedicated wheels. To drive the motors efficiently, we employ the L298D DC motor driver,…
A replacement Quick release plate based on the original. I received this tripod from a friend but the QR plate was missing. After a few tries I got this plate that at first might have a pretty firm contact with the tripod's head but after…
A friend that is a beekeeper asked for a honeycomb to test his hives.
Yet another knife sheath Category: Hand Tools
An old candlestick phone replica to be used as prop for filming, photo shooting, etc. Except the prints you will need a piece of cord (I used simple paracord with no electric wires) and a few M8 nuts. I used 3 M8 long nuts welded together…
A simple but efficent thumbnut/thumbscrew for M6 nuts and bolts that have a standard 10mm hexagon. I printed in PLA at 0.2 mm layer height, with 5 perimeters, 5 top and bottom layers, 30% infill.
A simple and fast small track to be printed from TPU or TPE. I included a variety of versions thicker and thinner to fit all needs.
A simple to print, only 3 parts, for a quick release that can be used with all small and medium cameras. The lock's screw is a M5 with a M5 nut.
A flexible wheel, 130 mm diameter, printed from TPU. It has pretty agresive profile, in order to be able to crawl over obstacles. The interior is designed for a Pololu adapter mount with 4 M3 screws.
A very simple, economical and easy to print organizer for 4 small size wrenches 6-13 mm. Printed in PLA, 0,2mm layer height, 100% infill.
Meet "ShoeBuddy," the suave connector on the block, ready to tie the knot between your cold shoe and any rig or gadget with a 1/4-inch hole. Crafted with precision (and a dash of flair), ShoeBuddy is the perfect matchmaker for your…
Had enough trouble while carrying your axe for a barbecue or camping? Why not use a sheath? Well my axe came without a sheath and I had to make one. It is printed in PLA with 100% infill.
The Moorebot Scout rover needs a bit of help in order to find its way back to the charger.
This is the simplest Robot arm with 2 DOF's I've seen. I took inspiration from: https://www.printables.com/model/449747-brazo-robotico-robotic-arm and https://www.printables.com/model/217054-rc-servo-robot-arm I combined this and deleted…
This is the simplest and easiest to print adapter for re-spooling filament on an empty spool. You will need: - 2 pcs of this print - 1 M6 x 80 or M6 x 100 mm screw (lenght is not crucial - it has to be around 20-30 mm longer than the…
Another mic flag/cube/logo. Printed with PLA, solid infil, glued the cover. It is filled with soft foam and can be branded with any logo, text, etc. Category: Audio
An A5 format bookcase for keeping documents in order. This prints in 2 parts, they are not identical! You need to print one piece each and glue them. I also added some tape, for security. Happy printing!
A simple but effective solution for organizing a few common size wrenches. In order to avoid the need for supports I included a very thin wall between the top and bottom hinges of the base part. This thin wall is only 0.2 mm thick so it…
This is a modular organizer for a lab. It has various types of drawers accepting from standard resistors to large volume parts. There is a 5 drawers and a 4 drawers cabinet. Everything prints without supports, in pla.
This is a universal wall-mounted electric toothbrush holder designed to fit round and oval electric toothbrush handles . Compatible with most models from: Philips Sonicare Oral-B Braun Other electric toothbrushes with similar cylindrical…
A clamp that I use to mount a temporary light on a round tube. The clamp can accomodate tubes of 5 mm up to 40 mm. It is a linear clamp so the speed of the screw can be a little slow sometimes but it is sturdy. It can grasp round, square…
The Moorebot Scout needs a ramp in order to be able to get ontoo balconies. So here it is!
This is the version with a single aroma capsule dispenser. I also added a version for 6 aromas. The limit is 6 because otherwise the part exceeds 250 mm available on a Prusa MK3/MK4. I printed in PLA, with 0.2 and 4 perimeters.
A custom-designed window mechanism brace, optimized specifically for the unique frame geometry and channels common in East European window profiles. Many existing designs are too generic or thick to fit these frames without modification.…
A small foot print, small size power supply for lab. The volts and amps can be set independent. The power supply also has 2 USB output for powering Arduino's or other equipment.
A barebone sheath to protect a knife's blade up to 160 mm long.
A funny On Air warning sign printed with white PLA that on the back reads: Sexy Time.
This quickrelease is inspired by another user's design, allthough redesigned. I needed a way to quickly take out and put back an Atomos Ninja monitor/recorder that has the SSD caddy on a side, only accesible if taken out of the case. The…
I used a 12v 7ah AGM battery so I needed a 3d model of it in order to integrate it in my project. You can re-use it in order to save some time from modelling it yourself.
A simple to print, deformable airless tire, 200 mm in diameter. You can use this for your robots. The tire is 200 mm in diameter in order to fit the Prusa MK3 print bed.
This is a simple to print on any Prusa MK printer because it is only 240 mm wide print, while the maximum X axes of Prusa printer is 250 mm. The part is a capsule holder for Nespresso coffee cardboard boxes that dispense up to 6 aromas. I…
A very simple to build linear actuator based on a N20 12v motor and 2 and switches, each for min and max of the travel. The max limit can be changed to work with your particular situation. At maximul, the stroke is 40mm. When the limit is…
A very handy and easy to print potentiometer knob. I printed it in TPU, but any other material will do.
A M5 thumbwheel for magic Arm. The original thumbnut came broken so I designed and printed another one. Category: 3D Printer Accessories
A simple small threaded track for tanks. Printed form TPU or TPE in provided orientation
A simple way to have your small socket wrenches at hand. Easy to print, ready to use!
The lock part for a Base for Quick release Manfrotto type. The original Base for Quick release Manfrotto type can be downloaded from here: https://www.printables.com/model/483865-base-for-quick-release-manfrotto-type
Meet MiniBot, the quirky office companion that's more than just a pretty face! Assembled from refurbished parts with the heart of a champion, MiniBot is here to add a touch of innovation to your desk. Need a hand with that pesky Jenga…
A simple to print and easy to use handle for screwdriver. Either as a screwdriver or as a bit holder, as long as it has a hex of ¼ " or 6 mm.
A dummy prop mic for podcast. It uses standard gopro arms. You can use any lenght or type. I included the microphone, the U bracket, two types of Gopro extension arms and the table foot. You will need a M6x60 screw with nylock nut and…
Using a simple LED 8x8 matrix with 4 modules, easy and cheaply to buy from China and a Wemos D1 mini you can build a programmable display. The software includes a local Wifi network and a webpage generated by the Wemos D1 mini. Using the…
This is the U bracket that helps mounting a seat for dolls on the front part of a 20 inch toddlers bicycle. The original seat can be found here: https://www.thingiverse.com/thing:3456321 But the mounting option is not suitable for my bike.
I mounted the Bambu Lab X1C in a pretty narrow place where it is difficult to reach behind the printer. Therefore I need to pull it out everytime I need to check the back of the machine, this way wearing prematurely the rubber feet and…
This is a replacement handle for Philips vacuum cleaners using S-bag dust bags . The part is designed as a direct drop-in replacement for the original handle and locks in place using the same click-fit mechanism , without modification of…
A very convenient way of re-using an old lcd display with only adding the required driver board. All 3d printed parts are designed to be printed on a Prusa MK3
This under-desk holder keeps your 2.5" drives out of sight and well-ventilated, without the clutter of loose cables or drives sitting on a desk. It fits two standard 2.5" HDDs or SSDs and was designed around real-world use — not just…
This is a thumbnut that I designed to be used with Base for Quick release Manfrotto type. It has a short M3 rod bend 90 degrees. This way it offers the best mechanical work and force to grip the Quick release plate. The base can be…
Using just a 12v cheap door lock actuator you can automate the locking of any door.
I tried many turntable designs but they were all different from what I needed so I decided to make my own. This turntable is rotated by a salvaged stepper motor, a EasyDriver stepper driver and controlled by a Node MCU ESP8266 wifi…
The front of a DIY flight case needed some corner brakets.
This is useful for east-european profile style. I could not find a model that fits this profile so I design it. It fits snugly.
I needed a lightweight stand for a speaker that was standing. It had to be easy to carry, easy to mount and dismount, and most important - cheap. So I used whatever I had lying around the house. You will need M6x50 screw with M6 nut,…
An enclosute for a stepup (boost) converter module.
Simple to print and use, efficent to have.
If you're lucky enough to own a combi car, transforming it into a comfortable camper is easier than you might think! With just a few simple materials and a bit of DIY spirit, you can create a cozy sleeping space right in the trunk. All…
A 15 mm electrical connector cap for dust free connections. It also has an eye for a “hold in position” wire.
A simple, economic and ergonomic thumbnut designed for M4 screws or nuts. Happy printing!
Because of lack of space I mounted my Bambulab X1C on 30mm wheels. This way I can slide the printer back and forth in order to clean behind it. But when I put the printer on a workbench for maintance the wheels might roll and the printer…
This is the part for keeping documents (car, personal, etc) on a keyring panel. I added all the parts also, just to have them at hand. Check my other designs in order to find the parts you might need.
I needed a drum to roll 50 m of wire that can be unrolled while connected. The cable connects a tracked robot to the remote. So the robot pulls the cable while the other end of the cable stays connected to the remote. Therefore I came…
I received a small cheap tripod with the top plate missing. So I designed this top part in order to mount a handycam on it. After printing, you will need also a ¼ 20 UNC screw to fit the camera's inner threads. I printed in PLA
A large On-Air warning, printed from 2 parts, glued. You will also need LED strip and a power connector.
If you ever need to replace a video inspection camera with a reversing camera, this adapter ring might come useful. Happy printing!
A way of storing, transporting and using 50m of SDI cable. Based on a Prusament spool with some add-ons. I intend to add a middle core with 2 bearings, a spool foot and handle and cable clips. For now it does it's job for storing the cable.
I needed a better servomotors tester for a project. So based on an Arduino Nano and a 1602 LCD display I made this tester. It can control up to 4 servomotors through 4 potentiometers from 0 to 180 degrees. On the display you can read the…
I made a simple Intercom analog system for vision director and 4 cameramen using common 3 wires, 3 pins XLR audio cables. The intercom is bi-directional, so everybody hears everybody.
My barbeque has its legs from squaretube 20x20 mm, but are too short. So I designed this insert to accept a M6x100 screw and another piece to accept a M6x18 long nut. This way I can raise the barbeque but also compensate for uneven…
This is the .stl and .skp model of a Nema 17 stepper with a 100:1 planetary reducer. Use it in your projects. Happy tinkering!
