Liczymy pasujące modele…
An adapter for Makita Trim Router (and clones) to a cheap Parkside guiderail. I splitted the model into 2 parts for easier print without supports. Printed in ABS with a 0.4mm nozzle and 0.2mm layerheight. What you need: 3x M3 heat inserts…
The stopper has a M4 counterhole. Simply mount it on top of the cheap 2020 belt tensioner. Now the carriage can't leave the rail anymore. On the other end of the rail sits the x axis endstop to do the same. The model was designed around…
I needed a nozzle mount for my ADXL345 sensor and my bambulab-style nozzles. All models I found are for the V6 nozzles so I made one. I printed the part in ABS with Voron settings and the magic 5 (5 walls, 5 top/bottom layers and 55%…
It's a newly designed hotend mount for the EVA 3.0 / E34M1 system. The version available here on printables allows the airflow from the hotend fan going to the nozzle. That can cause fine hairs on prints (stringing). I want to block that…
The model is easy to print without support. The orientation of the model is already the right one. The only model I could find could not be printed without supports. I printed it in ABS with a 0.4mm nozzle and 0.2mm layer height. You need…
I tried many keystone mounts but no one fitted my RJ45 keystone I had in my stock. So I designed my own. Features: Closed case Simple, sturdy and small Prints without support Strain relief with a small zip tie for keystones without…
Thanks to nhchiu and jonspaceharper for the extruder and toolhead step files and their work! I wanted to replace my Sherpa mini with the ProtoXtruder 2.0. The original drive mount for the Sherpa mini and the E34M1 didn't fit because the…
I designed the Leggero Nabecco / Becco coupling according to the original coupling. It needs supports like in the second picture. The holes are designed for M6 screws. It has a tight fit. Hole placement is like the original part. I…
A 5x Cable Clip for cables 6mm in diameter (6mm² solar cables usual have these diameters). Clips into a K2 Systems SingleRail 36. I added also a 2x 6mm² and 3x 4mm² Clip. I use it to hold the cables and the MC4 connectors in place. Easy…
An A3144 hall sensor holder for the popular rain gauge from @DusanJ. Sits in the original place like the reed switch. Just print it and press fit into its place. I secured the A3144 with some glue and before I added a 100nF capacity…
A cable clip for 60*60 cable duct (LFG 60). The original dimensions differ (it's 58mm width and not 60mm as advertised). So you may have to do a test print and see if it fits. It was printed in ASA but any other filament should work.…
I needed some distance plates to correct the heights of the singlehook. K2 has some official plates in 2mm thickness. I needed just some and different heights. So I designed some plates in 2mm, 3mm and 4mm height. K2 recommends not to…
I designed a cover for the K2 Singlehook 3s long. My garage roof is relatively flat and so the silver aluminum hooks are visible from below. That's the reason I designed a clip on cover for the hooks. For comparison I added a photo (with…
I designed a cable entry for solar panels for Braas Harzer Pfanne. It can fit 6mm2 solar cables in the left and right channel. The channel in the center is slightly bigger so you can fit up to a 10mm2 cable (like for earthing). The 3…
I designed another top cover / endcap for the K2 Singlerail 36 system. I have different end clamps that require more space in the top of the rail. I have various lengths to save extra cutting of the rail. Just snap it into place and it…
To wszystkie aktualnie dostępne wyniki.
