Liczymy pasujące modele…
My little one is in love with unicorns and baged me to design and print her a unicorn tag for her school bag. Well, here ist is . The unicorns mane is printed in multicolour by changing manually on layer height. Use the filament colours…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…
A keyring for Minecraft enthusiast with a pseudo-3D effect. It can be printed in multi color with layer change. If you like my stuff, then please leave a 👍🏻 and post a make!
This is a keychain inspired by the Harry Potter lettering. You can print in in two different colours by changing filament at layer height. Material: PLA Layer: 0.2mm Ironing: All Top Surfaces (optional, but looks better) If you like my…
Updates: I made following changes to my Satsana 5015 remix for 4020 fans and BLTouch: Changed the position and the mount for the BLTouch. The mount is now on the left side and fully integrated into the shroud. Change the X, Y, Z offsets…
[UPDATE July 19, 2024]: Added a horizontal version. In my job I have always to carry my company badge and Yubikey around, but I don't like to have them dangling separatly on my lanyard. So I designed a badgeholder, which can safely hold…
Important note: Make sure that the top and bottom layer are set to 0. The trick is that the infill pattern is the grid which appears when no top and bottom layers are printed. I totally love the spillproof desiccant boxes for the AMS from…
I needed an option to mount the Wemos d1 mini module of my OctoPrint-Monitor to my enclose and made this simple mount/case. It holds the module tight (but not too tight to aviod damage of the module), so it can't slip out. To insert the…
After I upgraded my Ender 3 Pro extruder to a Micro Swiss Direct Drive, cable management became an issue. Thus, I decided to embed all cables from the extruder into a cable chain and lead them to the rear-box, where the controller board…
[UPDATE Feb 15, 2022]: I made an update of this mod which you can find here https://www.prusaprinters.org/prints/134733-updated-satsana-50154020-fanbltouch-for-ender-3-en Thanks! [UPDATE Feb 12, 2021]: Uploaded the .step files for the…
A BMW M series keychain for all MPower fans! I made two versions of the keychain and you can select which on you like more - or both . Print it in multi-color with change at layerheight and apply ironing for clean surfaces. If you love my…
[UPDATE: October 1, 2020]: I uploaded a zip-file, which contains the .f3d and .step files for your convenience. Just delete the stl extension from the filename. This is a remix of the 120mm fan duct from moriaty_ (…
UPDATE, Oct. 6, 2024: I designed an additional version of the box, which can encompass an attached fan . The outer dimensions and the lid remained unchanged, so that you just need to re-print the box, if needed. I added two new profiles…
[ UPDATE: August 10, 2022 ] I remodelled the extruder part so that it connects to a drag chain (see here: https://www.printables.com/model/256682-cable-management-with-drag-chain-for-micro-swiss-d [UPDATE: January 29, 2021] I remodelled…
For my Micro Swiss Direct Drive Extruder I had re-modeled a wider cable holder to accommodate all cables running from the extruder to the mainboard. To use it in combination with a drag chain ( https://www.thingiverse.com/thing:4671124 )…
A MINI series keychain for all MINI fans based on the new MINI brand logo! Print it in multi-color with change at layerheight and apply ironing for clean surfaces. If you love my stuff then please leave a 👍 and post a make. Thanks!
A MINI John Cooper Works series keychain for all MINI fans! Print it in multi-color with change at layerheight and apply ironing for clean surfaces. If you love my stuff then please leave a 👍 and post a make. Thanks!
My kids love the movies from “Die Vorstandtkrokodile” and wanted to have such a tag like the kids wearing in the movie. Voila! All rights to the movies, books of the "Vorstadtkrokodile" are reserved. If you like my stuff then please leave…
My daughters asked me to print a medallion, in which they can store small pictures of their friends and family. The main challange was designing the hinge for the lids, but with the help of this instructable from Greg Zumwalt I managed…
I wanted to have my Expressi coffee capsules in a more stylish way at hand in the kitchen and designed this tower. Hope you like it! Please note: The tower holds only capsules from Expressi (sold by ALDI) or K-Fee and is NOT compatible…
This is another sensor mount for my Ender 3. See here for my previous one: https://www.thingiverse.com/thing:4597337 I made another one, because i was not satisfied with the laginess of the AM2302/DHT22 on the RaspberryPi. This mount…
@fortinmike designed an excellent magnetic key box, which I modified to fit also non-US keys, as European house keys tend to be larger. (all credits to fortinmike for the original design!). The position for the 8mm magnets remained…
A personalized Minercraft-style keychain for "Emilia. It is printed in multi-color with manual filament change at layer height. If you like my stuff, then please leave a 👍 and post a make. Thanks!
This is my remix of a simple tea dispenser. I added some holes on the sides to match my coffee capsule dispenser . Supports are only needed on the overhangs on the front side. If you love my stuff then please leave a 👍 and post a make.…
An updated version is here available: https://www.prusaprinters.org/prints/117036-lack-120mm-fan-duct-for-noctua For any updates plese look there. THANKS! --------------------------------------------------------------------------- This is…
This is a MINI One series keychain based on the former MINI logo! Print it in multi-color with change at layerheight and apply ironing for clean surfaces. If you love my stuff then please leave a 👍 and post a make. Thanks!
I regularly update the Marlin firmware on my Ender 3 Pro and got fed up with fiddling in and out the SD card from the enclore on its backside. Thus I designed a simple holder for an SD-card extender which mounts to one of the 4040…
I made a coaster derived from the logo of one of my most favoured beers: the Augustiner! It is printed in two colours with manual filament change a 1.2mm height. Material: PLA (gold and blue). Quality: 0.2mm Prost! 🍻 If you like my stuff,…
Instructions: Load the facecam_privacy-shade_logo.3mf file into PrusaSlicer, which contains the logo, arrow and body of the shield. Move the whole object out of center as the inlays might collide with the probe while homing before…
A sign which explains exactly , what a Process Manager does. ;-) Adjust the size in x and y direction in your slicer if desired. It is printed in multi-color with manual filament change at layer height. If you like my stuff, then please…
A personalized Minercraft-style keychain for "Louisa. It is printed in multi-color with manual filament change at layer height. If you like my stuff, then please leave a 👍 and post a make. Thanks!
This is a key chain of the new BMW i series brand logo. Print it in multi-color at layer change and apply ironing for a nicer surface finish. If you love my stuff then please leave a 👍 and post a make. Thanks!
This is the All-in-One (AIO) solution for the side-mounted spool holder. I compiled the latest and greatest improvement and remixes from @codebender, @ineiub and @Shortfin3D into one project. Please consider the licences of the original…
[Update: Sep 22, 2020] I made another mount for the BME280 sensor, too. Find it here: https://www.prusaprinters.org/prints/117039-am2302dht22-sensor-mount-for-extrusion-rail For my enclosure project with a temperature contolled fan I…
My kids use iPads with an Apple Pencil at school. It often happens that the kids mix up their pencils in class, e.g. when they work together in groups etc. Thus I designed those simple little marker rings, which can be printed in various…
I have a WD myPassport HDD for my MacBook Pro which is attached via USC-C to my Dell Monitor. Unfortunately, the HDD takes place on my desk and the cable running to the monitor was not pleasant. I run a dual monitor setup with the…
This is a small tool to remove the beam shaper (German Strahlformer) from certain taps made by Hansa. If you like my stuff then please leave a 👍 and post a make. Thanks!
This camera mount can be attached to a LACK enclosure (or similar) with magnets. The advantage is that you can easily remove the camera, if necessary e.g. for printer maintenance, and reposition it. The camera can be tilted and swiveled…
I remixed the original design made by raymagic with rounded corners and extended it for 18mm to the bottom as I use damping feet from dvandreh under my Ender 3 Pro ( https://www.thingiverse.com/thing:3755204 ) with 5mm ruber. Print…
I have a MagicMirror which is built into a 7x50cm Ikea Ribba frame. I wanted to upgrade the MM with a Grove gesture sensor to control it (PAJ7620U2). But as the frame does not provide any good options, I designed some covers which can…
I have my my X1C in closet (Ikea METOD), which is 60cm wide, but I can't insert conveniently an external spool, even sidemounted, due to the dimensional restrictions of the closet. I already had my AIO Spool Holder Remix installed , but I…
To wszystkie aktualnie dostępne wyniki.
