20 modeli
Trident PTFE Guides Printing: Default voron settings, correct orientation, no supports needed! Bom: Only printed parts. Description: Made to guide the PTFE tube uniformly into the extruder, and avoid rubbing against the top panel. One 90°…
Trident PTFE support Since it's little space above the gantry in a Trident the bowden tube gets tangled up at times (esp in a 350mm). This helps guide the tube out and around the chamber as the gantry moves around. Bom: 1x M3x8 Bolt and…
KNOMI Stealthburner HEX Face CHANGELOG 23.05.2023: Updated with the fix to the hole in the part cooling fan area. Added a “No KNOMI” version that is intended to to be used for those who aren't going to actually use a KNOMI but want's the…
Voron VT & V2 Service rockers CHANGELOG 29.04.2023: Braces, to help with som sideways stability i've made a couple braces to "pop-in" to the lower rear extrusion that help prop up the service supports. 20.04.2023: Tweaked the logo a bit…
Trident r1 Skirts with mesh CHANGELOG 16.04.2023: I found a fault in the official CAD & .stl. Fixed in this update, refere to the issue I made. 16.04.2023: Initial release. Regarding the middle fans you can use this. !!Caution!! - The two…
fume pack CHANGELOG 24.06.2023: DXF changes, the mounting holes have been changed to 4mm. And files for Voron 2.4, this meant changing all the DXF file names to "VT" & "V2" respectively. 20.06.2023: DXF Files. I've exported & upload DXF…
Canopy PTFE passthrough CHANGELOG 30.03.2024: Initial release. Description: I'm running both a Nevermore Stealthmax (which have sub-ideal PTFE routing) and "JSmith17's Canopy" on my Trident so I thought I'd make a better and more elegant…
VT Lowered Z Motor Mounts CHANGELOG 01.12.2022: Initial release, refere to description.. Description: Since i wanted a full 350mm cubed Trident i had to go with regular Nema17 steppers with loose leadscrews and couplers. That meant i had…
Trident-R1 rear WobbleX carriers CHANGELOG 01.05.2023: Opened up the center hole (where the leadscrew goes through) too 13mm to allow for more leadscrew movement without interfering witht he carrier body. 26.04.2023: Initial release.…
Trident-R1 front WobbleX carriers CHANGELOG 01.05.2023: Opened up the center hole (where the leadscrew goes through) too 13mm to allow for more leadscrew movement without interfering witht he carrier body. 26.04.2023: Variable pin sizes…
2.4 & Trident 350mmCanopy side handles CHANGELOG: 30.03.2024: Initial release. Description: I didn't want to remove the handles on my Trident when I started to print JSmith17's Canopy but didn't like the avalible options. I've been using…
MGN12H rear Z carrier for Trident-R1 CHANGELOG 01.05.2023: WobbleX - Opened up the center hole (where the leadscrew goes through) too 13mm to allow for more leadscrew movement without interfering witht he carrier body. 25.04.2023:…
Middle Fan Support with mesh The mesh parts are made to snap in, but i added a tiny drop of CA-glue on the backside in some spots to make sure they stay in place. Print the mesh with 0 bottom/top layers, 2 perimeters & 20% honeycomb…
2.4 & Trident side handles CHANGELOG: 30.03.2024: Initial release. Description: I've been using the original “Sturdy Handles” before and they've done their job, but then I saw "JSB's X-Handle" and I liked them, but they had some issues…
V2.4r2 Skirts with mesh Full set of meshed skirts for V2.4r2 (I haven't got a V2 myself so I have no idea if these fit pre-r2 or not) . Regarding the middle fans you can use this. !!Caution!! - The two "parts" of each skirt segment are…
Improved cable routing for the gate switch wires
Canopy fan blockoff plates CHANGELOG: 30.03.2024: Initial release. Description: I didn't want to re-print the rear corners of "JSmith17's Canopy" in case I eventually add exhaust fans, so I made these blockoff plates instead. Pictures:…
This is an older mod/design of mine originally uploaded to Thinigverse. Figgured it could serve someone here as well. It's two versions, one where the dividing wall is flush with the top of the insert and one where it protrudes above the…
Mounts for the Fysetc Big Dipper board to use on the Voron DIN-rail mounts. I'm including the CAD for anyone wanting to do something more.
Filament runout sensor for Bondtech LGX lite (v1 & v2) CHANGELOG: 17.02.2025: Initial release. Printing: Default voron settings, correct orientation, no supports needed! Bom: 2x 6mm FHCS - Needs to be stainless to avoid interference with…
To wszystkie aktualnie dostępne wyniki.
