Liczymy pasujące modele…
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
The Steam Controller needs a dock, this our my take on it. It is extremely close to the version we will release in June, except for three things: It lacks the weight to properly stay in place while removing the controller from the magnet…
This upload contains CAD files for the external shell (surface topology) of Steam Controller and the Steam Controller Puck, under a Creative Commons license. This includes an STP model of each, an STL model of each, and an engineering…
A novelty project for my sons series x, looks great and sits on top without any glues,tape etc. A small lip inside makes it sit perfectly on top of console Stl included so you can paint any way you like
For the leg mounted stabilizer bowl, use any one inch nylon velcro strap. Here is a link to one below: https://www.amazon.com/dp/B0B567TCHF If you would like me to print one for you, check out these links:…
A bit fixed version of Grub model from the Hollow Knight game. Original model is made by 3DesignPrintingBE . I also added a Shell for it, that provides shelter for the poor little creature and serves as a nice stand. The only difference…
You can find all STLs in STL archive as well as additional required items. Printing settings: 0.4mm nozzle, 0.2 mm layer, for the sight - 0.1mm layer
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
3D printed spacer to be used with the Robot_Retro Sega Saturn power supply. v2 version with a slightly shorter model to make it compatible with shorter USBC cables robot_retro store Designed by Joseph Tomkins
The case requires 4 x M3x12mm screws. During the installation, you will need to flex the top shelf quite a bit to make the MiSTER fit, so make sure filaments that are not overly brittle. I've personally printed the case in ASA.
Update: Added ML_12mm.STL for two layers and ML_24mm.STL for a single layer. --- This is the first of a three part series of multi-layered joysticks that use my arcade joystick mechanism (V3) and three of the push buttons from my Arcade…
This is a replacement circle pad cover for a Nintendo 2DS/3DS. This is just a cover for the circle pad if the old rubber has peeled off. Print this in TPU with supports on the bottom.
Requires supports for pegs Model is best to print in PETG or ABS for joints to work nicely and reliably. PLA also works, but joints weaken after 2-3 times. Block is optional, there is a version for two 5x5mm cylindrical magnets.…
Update: Added MLS_12mm.STL for two layers and MLS_24mm.STL for a single layer. --- This is the second of a three part series of multi-layered joysticks that use my arcade joystick mechanism (V3) and five of the push buttons from my Arcade…
Made this stand to display some of my special edition switch games in boxes. You need to print two of the a-frames.
A friend bought @Sam3DBox's 3-Spoke Steering Wheel and needed to connect it to the Moza Racing Quick Release, so I made this adapter for it. Added a tiny detent bump to make a bit more friction, so the steering wheel has a good hold but…
Remix of @wizzo TapTo case to fit the smaller module available on sites like AliExpress
I didn't like the sliding mechanism and the way the hooks covered part of the screen so I removed the hooks and added a friction fit connection for the phone. This is designed specifically to fit the iPhone 15 Pro Max with the Pitaka…
I made this as a physical tracker and fidget toy for use with Zelda Ocarina of Time randomizer. It tracks Medallions, Dungeons, Dungeon Entrances and Bosses for use of Boss and Dungeon Entrance shuffle settings. I'm using…
Make a 1V1 set or battle Royale it’s your choice
I was loking for Stick Locks for my PS Portal to chug it in my backpack without worries. I didnt find some to print so i designd these. I have also mada a variation for a Dualsense Controller: here
I remixed my PS Portal Sticklocks to fit a dualsense Controller, cause i found the small form factor handy.
Uploading here as it took me a fair while to find it! Useful if/when moving a DCHDMI enabled console from one shell to another and need to drill a new HDMI port opening. This block is for the original DCHDMI board. I believe it is also…
The Memory Pak stl available didn't seem to fit quite right, and was pretty low poly, so I rebuilt it from scratch in CAD. Step and Fusion source files available.
The box has a concealed latch within the nose recess to open the lid. Three different options for the tray insert are attached. None of the parts needed support material. Assembly Instructions: A small length of PLA wire directly from the…
My x-box series X was overheating despite a lot of space around it on the shelf. What I found is the hot air is filling the shelf and then being recirculated back into the X-box cooling intake. To prevent this, I designed a simple hood to…
not sure who would want to display their n64 vertically, but I personally needed for the n64 to stand vertically next to my crt and no one really made one I liked hence making the stand I used Wesk's 3d scans repository:…
Xbox series S minimal slide in wall dock. Designed in a way which use xbox bottom and back rubber pads to eliminate vibrations and add stability. Console can be removed without unscrewing anything and put back in same way. Parts included…
I brought Mobapad joycon which do not include the adapter with it. So I create my own that not too wide when assembly with the Mobapad. Along the designing process I found that the dimension of sliding rail is different than original one…
3d model for the Golden Statue from Deadlock, an upcoming Multiplayer action game developed and published by Valve .
Heart Piece from Legend of Zelda games Designed as one full piece but there are other versions with the heart and outer piece split for multicolour printing or a flat back to print flat on the print bed Heart Piece:…
After upgrading my SR-P Lite pedals with a load cell I wasn't happy with how they felt with their smooth plates and shallow angle. I found some decent looking and priced pedals on Amazon and created adapters for mounting them in a more…
Tested on Dualsense, Dualsense Edge, Dualshock 4. Very helpful in GTA online : ) V2 from 25/01/2026 : new design featuring a handle Recommended settings \_/ Ø 0.4 Layer height 0.1 Perimeters 2 Infill 40% Bottom & Top 4 4 Supports
This is a recreation of the P-51B Mustang canopy release lever, combined with a mount and dual-action electronic switches, for use in flight simulators. It was designed to mimic, as closely as possible, the size and shape of the original,…
I'm building my Airbus-style home cockpit. Not a real big one (don't have the space, time or money), but more a mobile one, consisting of 3 blocks with wooden cases which can be fixed on the desk table or can stand on the floor. I found…
This is a customizable variant of my Magnetic Phone Mount for the Fanatec DD1/DD2 sim racing wheel bases for wireless chargers such as Apple MagSafe adapters or any other round Qi wireless charger that is designed similarly. What you…
Similar to the Xbox Series X|S stand I did, this this the Playstation 5 dualsense controller stand. The controller fits perfect onto the stand and will not slide out. If you have any issues or questions please feel free to reach out to me…
This stand is similar to the other Playstation 5 Dualsense Controller Stand I posted but this one has a cut out in the back that uses less filament. It also has the PS5 title. If you have any issues or questions please feel free to reach…
Small Gamepad controller made with the intention to be used to control Menus in video games, specifically for sim racing purposes as not all racing wheels have the necessary controls to navigate menus comfortably, use the joystick to…
Couvercle de protection pour Xbox limitant l'absorption de poussière. Une extension trouée permet d'empêcher l'appui accidentel sur le bouton d'allumage. Le trou permet de vérifier que la console n'a pas été allumée par erreur afin de…
A case for the MEAN WELL QP-200-3A arcade power supply with voltmeters for +5v and +3.3v rails, and mounts for potentiometers to adjust the voltages (mod required to the PSU to wire those in). AC power is provided through a switched port…
simple design of these VDV paddle shifter designs to fit onto Thrustmaster Sparco button boxes (P310 and R383) reccomend printing with a lot more walls and dense infill to make them as solid as possible, i printed mine with 6 walls and…
This is designed to be used with heated inserts, the size I used is 1/4“-20x12.7. But any ¼ inch insert should work, as long as it's not longer. The ones I used: https://www.amazon.de/dp/B09MTS6ZZQ It's a very simple and convenient way to…
M8 mounting hole Standard printing profile - 2 walls, 15% infill, etc No supports/brims needed
A stand that holds 15 Nintendo Switch games that can be easily seen so you can pick the game you want to play. Let me know if you'd like to see something similar, but holding a different number of games.
This is a game controller stand with a dragon on the front. You can do a color change by Z height to get the stand in one color and the dragon in another. You do not need a multicolor printer. .stl, 3mf and gcode included.
When installed on this adapter, the base will be angled at 7 degrees from the cockpit mounting plate. To lock the base in front, you will need M6x18 screws (I had them with washers), and M6x10 screws for the back (included with the base).…
2026 Version 2 Update: I optimized the original version for ease of printing. This version has small bridges for the wire channel built-in to the model as shown in the gif. By adding bridges and removing the contour from the bottom of the…
Designed to accommodate the depth of the Pimax Crystal (Light), but it should work for almost any HMD. (Not suitable for PSVR2 due to how the visor is attached to the halo + the facial gasket is so soft it might hit the lenses). Spreads…
I always thought it was uncomfortable to game on the SP especially you people with bigger hands! So I decided to make a grip for it based on the form factor of the DS. Snug fit and good grip on the handheld so it won't fall out easy!…
I want to display my Game Boy Pocket on a shelf with other artifacts and have it be powered on permanently, so here's a stand that supports the 3.0v DC cable from funnyplaying.com! I like the minimal stand from injectx so this is modeled…
This is nintendo (26) game card holder that spins, it's sort of like a roulette of choosing what game you play.
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
I often have the problem of making wrong inputs on the snes controller so i made one with four physically separated parts acting as individual buttons i am quite new at 3D modeling so some stl files look a little bit messed up, but print…
Loving the Les Paul Clone Hero guitar, thought I would make a few changes to make it even a little fancier with the included .step file from the original creator. Guitar Neck (Split version) Split 2mm off the face of the neck and added…
I found myself playing my steamdeck mostly on tabletops and when using this stand the angle was uncomfortable for my hands, so I decided to remake it with sharper and adjustable angles. This stand can be positioned in 5 angles and fits in…
Print in this orientation with supports for the Skadis feet. For multicolor printers, I suggest you use another color for the logo to stand out more.
Remix of arbornoctis' excellent model. I redesigned the mount in Fusion 360 to fit my iPad Mini 4 with sleeve. Added the logo for fun :)
Hub adapter model to fit a 70mmX6 quick relase to your Cube Controls wheel. Universal 70mm PCD on one side and 50.8 PCD from Cube Controls on the other side. You need M5 countersink head bolt, 3 bolt on each side should be enough but you…
Easy print, no support needed. Please print the model on its side for best results. 3 wall lines recommended.
3D-Designed and Printed PlayStation 4 Controller Stand This custom-designed PlayStation 4 controller stand offers a sleek and practical way to display your controllers. Crafted with simplicity in mind, it was designed and 3D-printed to…
This model could share some of it's looks with another great wall mount. Some of their ideas I used in my design. Although I drew every line myself. There is one problem I have with mounting a gaming console of over 3kg's on my wall. I…
Support pour Steelbook à accrocher au mur, c'est mon premier modèle 3D. Imprimez en deux pour le tenir par le bas et le haut.
This is remixed hook for Ikea Skadis so it fits New NIntendo 3DS (non-XL) (If you dont use clear case it still would work but you can push model 0.5-0.6mm so it is more snug) Original author: @vinzcenzo
I was having issues with the provided latch on the "Nintendo Switch Joy-Con Wheel Pro" model being too stiff in both PLA and PETG. The model did not allow remixing, so I recreated the latch model and included the following features:…
Very easy, stable and fast to print SteamDeck stand. Suits OLED and LCD version. You can put it in your case (behind this strip on the back of case) Print 2 times
This is a stand designed for the Xbox one controller. Its form is inspired by the Ikea Pello armchair. It may be compatible with other controllers, but I have not been able to test this. It is easy and quick to print on its side without…
Just learning tinkercad. This helped get a feel for it. Print all at once or one color at a time.
-Parts List: M3 Screw (atleast 16mm long) M3 Nut (can also be replaced with a threaded insert) Plastic Glue -Assembly: Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue…
Matching the style of the ps5 controller stand Had requests for the xbox controller Print with supports
ATTENTION. THIS IS AN OLD AND BAD VERSION!!!!!! YOU CAN FIND THE NEW V2 HERE: https://www.printables.com/model/1727793-airbus-a320-radio-managment-panel-rmp !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Update 2025-08/05 -…
Controller stand with Xbox logo and gridfinity support (w/ magnets placeholder). Perfectly fits: Xbox ONE Controller; Xbox Series X|S Controller; Compatible (check pics): Playstation dualshock 4 (PS4) Playstation dualsence (PS5) Print…
El modelo necesita 4 tornillos de M3.5 y corona de 7mm. Está hecho para que no tengas que usar soportes. Sus dimensiones son 120x80x69mm.
🕹 Stackable Super Nintendo Game Storage – Support-Free Print with Dust Covers Organize and protect your SNES cartridge collection with this custom-designed, stackable storage system. Each unit is built to hold individual Super Nintendo…
🕹 Stackable Sega Genesis Game Storage – Support-Free Print with Dust Covers Level up your retro organization with this custom-designed storage system for Sega Genesis cartridges. Each unit is built to hold individual games securely and…
🕹 Stackable NES Game Storage – Support-Free Print with Dust Covers Keep your NES cartridge collection clean, organized, and ready to play with this custom-designed, stackable storage solution. Each unit is built to hold individual NES…
Rubber Duck wearing Mario's cap from Mario Kart 8 Deluxe's "Squeaky Clean Sprint" course
DIY Paddle Clutch PERSONAL USE LICENSE ONLY Files are for personal use only, non-commercial and not for resale Copyright by KODAI Racing Features Hall effect sensor Ball bearing movement Compact design Easy FDM printing A simple two-part…
Dos versiones de soporte para el Skadis de IKEA del mando 8BitDo Ultimate 2C. Two mount versions for the IKEA Skadis.
Solid D-pads, due to their geometry, incorrectly register diagonal inputs if a cardinal direction is pressed too hard. Split D-pads solve this by having a separate pieces for each directional button, which eliminates cross-button…
Attaches a phone or switch to the Pro controller. Requires a rubber band and 1/4-20x1.5 inch screw with nut (or M6 x40 would fit). If you don't have the hardware you can download models from McMaster-Carr. Extend piece snaps onto main…
Update: Added version with slightly larger magnet holes I designed a magnetic case for the Trimui Brick handheld console, complete with a set of handy features: Utilizes the foam insert that comes with the Trimui Brick Slots for 5x2mm…
This is a Gravity, or motion, deployed Hidden Blade. Inspired, obviously, by Assassin's Creed. Printed at 0.15 mm Layer hight, 15% infill, 3 walls, and in PLA. You will need support for the locking tab at the front of the main housing. I…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of screw…
You have died of dysentery. (whoops) Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 **Rafts:** No Supports: No **Infill:** 100%
